[Thu Aug 16 20:31:50 2012] Detection parameters:
  Position = (331.7, 485.0) = 5 38 1.71 -55 49 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 392.7 +/- 40.1
  Background counts = 378.3
  Rate = 0.03 +/- 0.003

[Thu Aug 16 20:31:51 2012] Off-axis axis estimate = 13.74'
[Thu Aug 16 20:39:15 2012] Using EEF radius (= 13.30 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 20:39:15 2012] Initial guess for spatial extent in simple fitting = 13.30"
[Thu Aug 16 20:39:15 2012] source mask rpix=3.1, npix_max = 50, mask sum = 56, frac = 1.107
[Thu Aug 16 20:39:15 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 13.30"
[Thu Aug 16 22:57:56 2012] fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_src10.ximg exists
[Thu Aug 16 22:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_src10.csv
[Thu Aug 16 22:57:56 2012] fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu Aug 16 22:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_src10.csv
[Thu Aug 16 22:57:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 22:57:57 2012] fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu Aug 16 22:57:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src10.csv
[Thu Aug 16 22:57:57 2012] fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Aug 16 22:57:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src10.csv
[Thu Aug 16 22:57:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 01:36:33 2012] Warning, spatial fit 10 centroid is now closest to src. 3
[Fri Aug 17 01:36:33 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 01:36:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 01:36:33 2012] Assessing source extent using major
[Fri Aug 17 01:36:33 2012] Source does appear to be extended
[Fri Aug 17 01:36:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 01:36:33 2012] Source is confused with source 14
[Fri Aug 17 01:36:33 2012] Source is confused with source 25
[Fri Aug 17 01:36:55 2012] Using EEF radius (= 13.30 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 01:36:55 2012] Initial guess for spatial extent in simple fitting = 13.30"
[Fri Aug 17 01:36:55 2012] source mask rpix=3.1, npix_max = 50, mask sum = 56, frac = 1.107
[Fri Aug 17 01:36:55 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 13.30"
[Fri Aug 17 04:04:50 2012] fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_src9.ximg exists
[Fri Aug 17 04:04:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_src9.csv
[Fri Aug 17 04:04:50 2012] fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Aug 17 04:04:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_src9.csv
[Fri Aug 17 04:04:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 04:04:52 2012] fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Aug 17 04:04:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri Aug 17 04:04:52 2012] fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Aug 17 04:04:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri Aug 17 04:04:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 06:05:55 2012] Warning, spatial fit 9 centroid is now closest to src. 25
[Fri Aug 17 06:05:55 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 06:05:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 06:05:55 2012] Assessing source extent using major
[Fri Aug 17 06:05:55 2012] Source does appear to be extended
[Fri Aug 17 06:05:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 06:06:17 2012] XMMSAS src. selection expression = ellipse(28808.373566, 42145.899963, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 17 06:06:17 2012] Writing source region out to fullrun_pn_xmm0604010801_pi300-10000_pass1_cl_src12_src.reg
[Fri Aug 17 06:06:17 2012] Extracting stamp from image fullrun_pn_xmm0604010801_pi300-10000_cl_sm2.00.img.gz, (294, 447) - (369, 522)
[Fri Aug 17 06:06:17 2012] XMMSAS bgd. selection expression = annulus(28808.373566, 42145.899963, 1087.500000, 2175.000000, X, Y) && !ellipse(28253.554000, 42262.702000, 2092.792060, 2092.792060, 0.000000, X, Y) && !ellipse(31109.591003, 42267.303833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31790.659119, 42217.779572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29525.518219, 42318.211365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30698.311035, 42229.177612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26311.265411, 42158.041412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27805.141541, 41997.836945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28730.222778, 41631.647339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30426.436035, 41460.092621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26718.212372, 41953.253693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31836.968140, 41361.763611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29725.978000, 41052.468000, 2107.632061, 2107.632061, 0.000000, X, Y) && !ellipse(27406.220734, 41359.047516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26260.118400, 41272.485460, 506.881615, 506.881615, 0.000000, X, Y) && !ellipse(29339.074097, 40683.132812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27302.920000, 40053.386000, 1985.496057, 1985.496057, 0.000000, X, Y) && !ellipse(27408.405823, 42446.815674, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 17 06:06:17 2012] Writing fullrun_pn_xmm0604010801_pi300-10000_pass1_cl_src12.gif
[Fri Aug 17 06:27:48 2012] Mean detx,y = (-14181.97, 11415.72) 
[Fri Aug 17 06:27:50 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 06:28:07 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 06:28:08 2012] Setting source spectrum file to fullrun_pn_xmm0604010801_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Aug 17 06:28:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604010801_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Fri Aug 17 06:46:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 17 06:46:01 2012] rmf not generated due to insufficient counts
[Fri Aug 17 07:46:18 2012] Updating aperture counts using extracted products
[Fri Aug 17 07:46:18 2012] Error reading totcts from fullrun_pn_xmm0604010801_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Aug 17 07:46:19 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 07:46:19 2012] Using photon index=1.80, rate=0.0306, arf fullrun_pn_xmm0604010801_pi300-10000_pass1_cl_src12.arf
[Fri Aug 17 07:46:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 07:46:19 2012] Updating source flux to 2.6e-13
[Fri Aug 17 07:48:13 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 17 07:49:34 2012] xmm0604010801/analysis//spectral/fullrun_pn_xmm0604010801_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete