[Thu Aug 16 20:32:42 2012] Detection parameters:
  Position = (202.8, 278.1) = 5 39 8.58 -56 4 21.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.2 +/- 20.7
  Background counts = 135.4
  Rate = 0.009 +/- 0.002

[Thu Aug 16 20:32:43 2012] Off-axis axis estimate = 7.09'
[Thu Aug 16 23:07:35 2012] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 23:07:35 2012] Initial guess for spatial extent in simple fitting = 9.97"
[Thu Aug 16 23:07:35 2012] source mask rpix=2.3, npix_max = 31, mask sum = 35, frac = 1.122
[Thu Aug 16 23:07:35 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.97"
[Fri Aug 17 01:36:23 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src6.ximg exists
[Fri Aug 17 01:36:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src6.csv
[Fri Aug 17 01:36:23 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Aug 17 01:36:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src6.csv
[Fri Aug 17 01:36:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 01:36:24 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Aug 17 01:36:24 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Aug 17 01:36:24 2012] Fit fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Aug 17 01:36:45 2012] Spatial fit model total counts = 699.272000, observed total counts = 642.000000
[Fri Aug 17 01:36:45 2012] Offset between fit and detection position for source 48 = 2.000410 pixels
[Fri Aug 17 01:36:45 2012] 711.173300 total counts/ 629.631000 bgd. counts: snr = 3.249675
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 2.000410 pixels
  Position = (201.4, 279.5) = 5 39 9.29 -56 4 16.2
  Extent = 14.2 (3.6-19.9)", rotation angle = 0
  Source counts = 81.5 +/- 26.7
  Background counts = 629.6
  Rate = 0.007 +/- 0.002
[Fri Aug 17 01:36:45 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 01:36:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 01:36:45 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 01:36:45 2012] Source does appear to be extended
[Fri Aug 17 01:36:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 04:12:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 17 04:12:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 17 04:12:05 2012] Initial guess for spatial extent in simple fitting = 14.15"
[Fri Aug 17 04:12:05 2012] source mask rpix=3.3, npix_max = 56, mask sum = 46, frac = 0.816
[Fri Aug 17 04:12:05 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 14.15"
[Fri Aug 17 06:05:45 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src5.ximg exists
[Fri Aug 17 06:05:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src5.csv
[Fri Aug 17 06:05:45 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Aug 17 06:05:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src5.csv
[Fri Aug 17 06:05:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 06:05:46 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Aug 17 06:05:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Aug 17 06:05:46 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Aug 17 06:05:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Aug 17 06:05:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 06:06:06 2012] Warning, spatial fit 5 centroid is now closest to src. 50
[Fri Aug 17 06:06:07 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 06:06:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 06:06:07 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 06:06:07 2012] Source does appear to be extended
[Fri Aug 17 06:06:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 07:04:15 2012] XMMSAS src. selection expression = ellipse(17474.281000, 24268.526800, 849.150024, 849.150024, 0.000000, X, Y)
[Fri Aug 17 07:04:15 2012] Writing source region out to fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src48_src.reg
[Fri Aug 17 07:04:15 2012] Extracting stamp from image fullrun_mos2_xmm0604010801_pi300-10000_cl_sm2.00.img.gz, (153, 231) - (250, 328)
[Fri Aug 17 07:04:15 2012] XMMSAS bgd. selection expression = annulus(17474.281000, 24268.526800, 1415.250041, 2830.500081, X, Y) && !ellipse(18314.508859, 23332.243261, 1437.650820, 578.209669, 72.536066, X, Y) && !ellipse(18638.453766, 25262.255371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19772.752640, 26105.107697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19854.798355, 22200.263184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20245.573532, 25971.411041, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 17 07:04:15 2012] Writing fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src48.gif
[Fri Aug 17 07:05:04 2012] Mean detx,y = (-6099.01, -5976.82) 
[Fri Aug 17 07:05:05 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 07:05:19 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 07:05:19 2012] Setting source spectrum file to fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Fri Aug 17 07:05:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Fri Aug 17 07:23:06 2012] Not generating rmf since there are only 81 counts
[Fri Aug 17 07:23:06 2012] rmf not generated due to insufficient counts
[Fri Aug 17 07:46:19 2012] Updating aperture counts using extracted products
[Fri Aug 17 07:46:19 2012] Error reading totcts from fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Fri Aug 17 07:46:20 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 07:46:20 2012] Using photon index=1.80, rate=0.00724, arf fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src48.arf
[Fri Aug 17 07:46:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 07:46:20 2012] Updating source flux to 1e-13
[Fri Aug 17 07:46:29 2012] Source 48 has fewer than 100.000000 counts, skipping spectral fitting