[Thu Aug 16 20:32:41 2012] Detection parameters:
  Position = (487.2, 274.0) = 5 36 40.76 -56 4 37.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.0 +/- 18.4
  Background counts = 66.2
  Rate = 0.006 +/- 0.001

[Thu Aug 16 20:32:43 2012] Off-axis axis estimate = 13.80'
[Thu Aug 16 23:07:35 2012] Using EEF radius (= 13.33 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 23:07:35 2012] Initial guess for spatial extent in simple fitting = 13.33"
[Thu Aug 16 23:07:35 2012] source mask rpix=3.1, npix_max = 50, mask sum = 56, frac = 1.102
[Thu Aug 16 23:07:35 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 13.33"
[Fri Aug 17 01:36:23 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src27.ximg exists
[Fri Aug 17 01:36:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src27.csv
[Fri Aug 17 01:36:23 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src27_1.ximg exists
[Fri Aug 17 01:36:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src27.csv
[Fri Aug 17 01:36:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 01:36:24 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Fri Aug 17 01:36:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src27.csv
[Fri Aug 17 01:36:24 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Aug 17 01:36:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src27.csv
[Fri Aug 17 01:36:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 01:36:45 2012] Warning, spatial fit 27 centroid is now closest to src. 6
[Fri Aug 17 01:36:45 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 01:36:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 01:36:45 2012] Assessing source extent using major
[Fri Aug 17 01:36:45 2012] Source does appear to be extended
[Fri Aug 17 01:36:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 01:36:45 2012] Source is confused with source 7
[Fri Aug 17 04:12:05 2012] Using EEF radius (= 13.33 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 04:12:05 2012] Initial guess for spatial extent in simple fitting = 13.33"
[Fri Aug 17 04:12:05 2012] source mask rpix=3.1, npix_max = 50, mask sum = 56, frac = 1.102
[Fri Aug 17 04:12:05 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 13.33"
[Fri Aug 17 06:05:45 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src26.ximg exists
[Fri Aug 17 06:05:45 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src26.csv
[Fri Aug 17 06:05:45 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src26_1.ximg exists
[Fri Aug 17 06:05:45 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src26.csv
[Fri Aug 17 06:05:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 06:05:46 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Fri Aug 17 06:05:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src26.csv
[Fri Aug 17 06:05:46 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Fri Aug 17 06:05:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src26.csv
[Fri Aug 17 06:05:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 06:06:06 2012] Source 4 is offset by 6.012735 and 7.237967 pixels which is larger than
2 X fitted extent = 1.033251 x 1.033251, not incorporating fit results
[Fri Aug 17 06:06:06 2012] Warning, spatial fit 26 centroid is now closest to src. 6
[Fri Aug 17 06:06:06 2012] Spatial fit model total counts = 251.368000, observed total counts = 367.000000
[Fri Aug 17 06:06:06 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 17 06:06:06 2012] Spatial fit model total counts = 566.346000, observed total counts = 554.000000
[Fri Aug 17 06:06:06 2012] Offset between fit and detection position for source 4 = 1.385913 pixels
[Fri Aug 17 06:06:06 2012] Warning, changing simple spatial fit ID from 26 to 50
[Fri Aug 17 06:06:06 2012] 525.029700 total counts/ 506.534000 bgd. counts: snr = 0.821801
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.385913 pixels
  Position = (486.1, 273.2) = 5 36 41.35 -56 4 41.9
  Extent = 5.8 (3.3-22.6)", rotation angle = 0
  Source counts = 18.5 +/- 22.9
  Background counts = 506.5
  Rate = 0.002 +/- 0.002
  Deleting source due to low Poisson probability