[Thu Aug 16 20:32:42 2012] Detection parameters:
  Position = (456.5, 309.1) = 5 36 56.83 -56 2 4.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.0 +/- 16.2
  Background counts = 82.9
  Rate = 0.004 +/- 0.0009

[Thu Aug 16 20:32:43 2012] Off-axis axis estimate = 11.49'
[Thu Aug 16 23:07:36 2012] Using EEF radius (= 12.17 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 23:07:36 2012] Initial guess for spatial extent in simple fitting = 12.17"
[Thu Aug 16 23:07:36 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.965
[Thu Aug 16 23:07:36 2012] Giving source the simple spatial ID 54 for pass 0, mean size = 12.17"
[Fri Aug 17 01:36:24 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src54.ximg exists
[Fri Aug 17 01:36:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src54.csv
[Fri Aug 17 01:36:24 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src54_1.ximg exists
[Fri Aug 17 01:36:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src54.csv
[Fri Aug 17 01:36:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 01:36:25 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Fri Aug 17 01:36:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src54.csv
[Fri Aug 17 01:36:25 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Fri Aug 17 01:36:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src54.csv
[Fri Aug 17 01:36:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 01:36:45 2012] Warning, spatial fit 54 centroid is now closest to src. 39
[Fri Aug 17 01:36:45 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 01:36:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 01:36:45 2012] Assessing source extent using major
[Fri Aug 17 01:36:45 2012] Source does appear to be extended
[Fri Aug 17 01:36:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 01:36:45 2012] Source is confused with source 34
[Fri Aug 17 04:12:05 2012] Using EEF radius (= 12.17 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 04:12:05 2012] Initial guess for spatial extent in simple fitting = 12.17"
[Fri Aug 17 04:12:05 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.965
[Fri Aug 17 04:12:05 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 12.17"
[Fri Aug 17 06:05:46 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src51.ximg exists
[Fri Aug 17 06:05:46 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src51_1.ximg exists
[Fri Aug 17 06:05:46 2012] Fit fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src51 appears to have run properly
[Fri Aug 17 06:05:47 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Fri Aug 17 06:05:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src51.csv
[Fri Aug 17 06:05:47 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Fri Aug 17 06:05:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src51.csv
[Fri Aug 17 06:05:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 06:06:07 2012] Warning, spatial fit 51 centroid is now closest to src. 34
[Fri Aug 17 06:06:07 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 06:06:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 06:06:07 2012] Assessing source extent using major
[Fri Aug 17 06:06:07 2012] Source does appear to be extended
[Fri Aug 17 06:06:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 07:04:17 2012] XMMSAS src. selection expression = ellipse(39667.493835, 26847.424683, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 17 07:04:17 2012] Writing source region out to fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src36_src.reg
[Fri Aug 17 07:04:17 2012] Extracting stamp from image fullrun_mos2_xmm0604010801_pi300-10000_cl_sm2.00.img.gz, (419, 272) - (494, 347)
[Fri Aug 17 07:04:17 2012] XMMSAS bgd. selection expression = annulus(39667.493835, 26847.424683, 1087.500000, 2175.000000, X, Y) && !ellipse(42679.818390, 24699.776794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40459.122681, 26775.037964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38882.125549, 26207.668823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41712.625732, 25003.514801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42202.353851, 24430.477173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41319.989380, 26113.120575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40077.889679, 27084.091339, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 17 07:04:17 2012] Writing fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src36.gif
[Fri Aug 17 07:18:09 2012] Mean detx,y = (12006.57, 6975.49) 
[Fri Aug 17 07:18:10 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 07:18:28 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 07:18:28 2012] Setting source spectrum file to fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Fri Aug 17 07:18:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Fri Aug 17 07:45:21 2012] Not generating rmf since there are only 72 counts
[Fri Aug 17 07:45:21 2012] rmf not generated due to insufficient counts
[Fri Aug 17 07:46:20 2012] Updating aperture counts using extracted products
[Fri Aug 17 07:46:20 2012] Error reading totcts from fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Fri Aug 17 07:46:21 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 07:46:21 2012] Using photon index=1.80, rate=0.00412, arf fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src36.arf
[Fri Aug 17 07:46:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 07:46:21 2012] Updating source flux to 1.1e-13
[Fri Aug 17 07:46:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting