[Thu Aug 16 20:32:42 2012] Detection parameters:
  Position = (293.5, 179.7) = 5 38 21.43 -56 11 35.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.0 +/- 21.0
  Background counts = 151.6
  Rate = 0.01 +/- 0.002

[Thu Aug 16 20:32:43 2012] Off-axis axis estimate = 8.62'
[Thu Aug 16 23:07:35 2012] Using EEF radius (= 10.74 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 23:07:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug 16 23:07:35 2012] Initial guess for spatial extent in simple fitting = 10.74"
[Thu Aug 16 23:07:35 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.021
[Thu Aug 16 23:07:35 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.74"
[Fri Aug 17 01:36:23 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src3.ximg exists
[Fri Aug 17 01:36:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src3.csv
[Fri Aug 17 01:36:23 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Aug 17 01:36:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src3.csv
[Fri Aug 17 01:36:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 01:36:24 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Aug 17 01:36:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Aug 17 01:36:24 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Aug 17 01:36:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Aug 17 01:36:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 01:36:45 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 13.974288 pixels away
[Fri Aug 17 01:36:45 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 01:36:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 01:36:45 2012] Assessing source extent using major
[Fri Aug 17 01:36:45 2012] Source does appear to be extended
[Fri Aug 17 01:36:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 04:12:05 2012] Using EEF radius (= 10.74 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 04:12:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 17 04:12:05 2012] Initial guess for spatial extent in simple fitting = 10.74"
[Fri Aug 17 04:12:05 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.021
[Fri Aug 17 04:12:05 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.74"
[Fri Aug 17 06:05:45 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src3.ximg exists
[Fri Aug 17 06:05:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src3.csv
[Fri Aug 17 06:05:45 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Aug 17 06:05:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src3.csv
[Fri Aug 17 06:05:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 06:05:46 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Aug 17 06:05:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Aug 17 06:05:46 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Aug 17 06:05:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Aug 17 06:05:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 06:06:06 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 12.323516 pixels away
[Fri Aug 17 06:06:07 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 06:06:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 06:06:07 2012] Assessing source extent using major
[Fri Aug 17 06:06:07 2012] Source does appear to be extended
[Fri Aug 17 06:06:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 07:04:15 2012] XMMSAS src. selection expression = ellipse(25488.997528, 15581.980057, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 17 07:04:15 2012] Writing source region out to fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src35_src.reg
[Fri Aug 17 07:04:15 2012] Extracting stamp from image fullrun_mos2_xmm0604010801_pi300-10000_cl_sm2.00.img.gz, (256, 142) - (331, 217)
[Fri Aug 17 07:04:15 2012] XMMSAS bgd. selection expression = annulus(25488.997528, 15581.980057, 1087.500000, 2175.000000, X, Y)
[Fri Aug 17 07:04:15 2012] Writing fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src35.gif
[Fri Aug 17 07:04:29 2012] Mean detx,y = (-6017.14, 5687.48) 
[Fri Aug 17 07:04:30 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 07:04:45 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 07:04:45 2012] Setting source spectrum file to fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Fri Aug 17 07:04:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Fri Aug 17 07:22:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 17 07:22:46 2012] rmf not generated due to insufficient counts
[Fri Aug 17 07:46:19 2012] Updating aperture counts using extracted products
[Fri Aug 17 07:46:19 2012] Error reading totcts from fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Fri Aug 17 07:46:20 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 07:46:20 2012] Using photon index=1.80, rate=0.0106, arf fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src35.arf
[Fri Aug 17 07:46:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 07:46:20 2012] Updating source flux to 1.6e-13
[Fri Aug 17 07:46:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting