[Thu Aug 16 20:32:42 2012] Detection parameters:
  Position = (300.3, 372.7) = 5 38 17.89 -55 57 27.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.4 +/- 17.1
  Background counts = 133.9
  Rate = 0.009 +/- 0.002

[Thu Aug 16 20:32:43 2012] Off-axis axis estimate = 5.39'
[Thu Aug 16 23:07:35 2012] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 23:07:35 2012] Initial guess for spatial extent in simple fitting = 9.12"
[Thu Aug 16 23:07:35 2012] source mask rpix=2.1, npix_max = 26, mask sum = 24, frac = 0.890
[Thu Aug 16 23:07:35 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 9.12"
[Fri Aug 17 01:36:23 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src10.ximg exists
[Fri Aug 17 01:36:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src10.csv
[Fri Aug 17 01:36:23 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri Aug 17 01:36:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src10.csv
[Fri Aug 17 01:36:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 01:36:24 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri Aug 17 01:36:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri Aug 17 01:36:24 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Aug 17 01:36:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri Aug 17 01:36:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 01:36:45 2012] Warning, spatial fit 10 centroid is now closest to src. 25
[Fri Aug 17 01:36:45 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 01:36:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 01:36:45 2012] Assessing source extent using major
[Fri Aug 17 01:36:45 2012] Source does appear to be extended
[Fri Aug 17 01:36:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 01:36:45 2012] Source is confused with source 21
[Fri Aug 17 04:12:05 2012] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 04:12:05 2012] Initial guess for spatial extent in simple fitting = 9.12"
[Fri Aug 17 04:12:05 2012] source mask rpix=2.1, npix_max = 26, mask sum = 24, frac = 0.890
[Fri Aug 17 04:12:05 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 9.12"
[Fri Aug 17 06:05:45 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src9.ximg exists
[Fri Aug 17 06:05:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src9.csv
[Fri Aug 17 06:05:45 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Aug 17 06:05:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src9.csv
[Fri Aug 17 06:05:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 06:05:46 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Aug 17 06:05:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri Aug 17 06:05:46 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Aug 17 06:05:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri Aug 17 06:05:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 06:06:06 2012] Warning, spatial fit 9 centroid is now closest to src. 25
[Fri Aug 17 06:06:06 2012] Spatial fit model total counts = 863.722000, observed total counts = 815.000000
[Fri Aug 17 06:06:06 2012] Offset between fit and detection position for source 24 = 4.566444 pixels
[Fri Aug 17 06:06:06 2012] Warning, changing simple spatial fit ID from 9 to 13
[Fri Aug 17 06:06:06 2012] 657.221000 total counts/ 546.937000 bgd. counts: snr = 4.715675
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 4.566444 pixels
  Position = (295.8, 372.6) = 5 38 20.26 -55 57 31.7
  Extent = 14.8 (9.1-17.8)", rotation angle = 0
  Source counts = 110.3 +/- 25.6
  Background counts = 546.9
  Rate = 0.01 +/- 0.002
[Fri Aug 17 06:06:07 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 06:06:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 06:06:07 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 06:06:07 2012] Source does appear to be extended
[Fri Aug 17 06:06:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 07:04:16 2012] XMMSAS src. selection expression = ellipse(25683.792000, 32370.886000, 885.648025, 885.648025, 0.000000, X, Y)
[Fri Aug 17 07:04:16 2012] Writing source region out to fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src24_src.reg
[Fri Aug 17 07:04:16 2012] Extracting stamp from image fullrun_mos2_xmm0604010801_pi300-10000_cl_sm2.00.img.gz, (245, 322) - (347, 424)
[Fri Aug 17 07:04:16 2012] XMMSAS bgd. selection expression = annulus(25683.792000, 32370.886000, 1476.080042, 2952.160085, X, Y) && !ellipse(22555.577789, 28991.119232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26597.387299, 32648.517670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27219.588000, 34767.012000, 3430.544099, 3430.544099, 0.000000, X, Y) && !ellipse(27085.094940, 32050.249298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26302.843658, 31892.245850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28463.907410, 30254.135254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26560.370000, 31407.316600, 1390.816040, 1390.816040, 0.000000, X, Y) && !ellipse(27113.260000, 31033.312000, 2781.632080, 2781.632080, 0.000000, X, Y) && !ellipse(28464.918976, 35895.546814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28255.052000, 35483.624000, 1715.272049, 1715.272049, 0.000000, X, Y)
[Fri Aug 17 07:04:16 2012] Writing fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src24.gif
[Fri Aug 17 07:06:14 2012] Mean detx,y = (5375.72, -6408.20) 
[Fri Aug 17 07:06:15 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 07:06:26 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 07:06:26 2012] Setting source spectrum file to fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Fri Aug 17 07:06:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Fri Aug 17 07:46:19 2012] Updating aperture counts using extracted products
[Fri Aug 17 07:46:19 2012] Error reading totcts from fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Fri Aug 17 07:46:20 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 07:46:20 2012] Using photon index=1.80, rate=0.00979, arf fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src24.arf
[Fri Aug 17 07:46:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 07:46:20 2012] Updating source flux to 2.2e-13
[Fri Aug 17 07:46:29 2012] Flag c found in src. 24 procflags, skipping spectral fitting