[Thu Aug 16 20:32:42 2012] Detection parameters:
  Position = (311.9, 369.0) = 5 38 11.91 -55 57 49.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.5 +/- 19.5
  Background counts = 129.1
  Rate = 0.008 +/- 0.002

[Thu Aug 16 20:32:43 2012] Off-axis axis estimate = 5.20'
[Thu Aug 16 23:07:35 2012] Using EEF radius (= 9.03 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 23:07:35 2012] Initial guess for spatial extent in simple fitting = 9.03"
[Thu Aug 16 23:07:35 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.130
[Thu Aug 16 23:07:35 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 9.03"
[Fri Aug 17 01:36:23 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src13.ximg exists
[Fri Aug 17 01:36:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src13.csv
[Fri Aug 17 01:36:23 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Aug 17 01:36:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src13.csv
[Fri Aug 17 01:36:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 01:36:24 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Aug 17 01:36:24 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Aug 17 01:36:24 2012] Fit fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Aug 17 01:36:45 2012] Source 22 is offset by -5.338610 and 3.562475 pixels which is larger than
2 X fitted extent = 1.118267 x 1.118267, not incorporating fit results
[Fri Aug 17 01:36:45 2012] Source 22 is offset by -1.194219 and -3.123479 pixels which is larger than
2 X fitted extent = 1.009329 x 1.009329, not incorporating fit results
[Fri Aug 17 01:36:45 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 01:36:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 01:36:45 2012] Assessing source extent using major
[Fri Aug 17 01:36:45 2012] Source does appear to be extended
[Fri Aug 17 01:36:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 01:36:45 2012] Source is confused with source 25
[Fri Aug 17 04:12:05 2012] Using EEF radius (= 9.03 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 04:12:05 2012] Initial guess for spatial extent in simple fitting = 9.03"
[Fri Aug 17 04:12:05 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.130
[Fri Aug 17 04:12:05 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 9.03"
[Fri Aug 17 06:05:45 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src12.ximg exists
[Fri Aug 17 06:05:45 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri Aug 17 06:05:45 2012] Fit fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src12 appears to have run properly
[Fri Aug 17 06:05:46 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri Aug 17 06:05:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri Aug 17 06:05:46 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Aug 17 06:05:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri Aug 17 06:05:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 06:06:06 2012] Warning, spatial fit 12 centroid is now closest to src. 25
[Fri Aug 17 06:06:07 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 06:06:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 06:06:07 2012] Assessing source extent using major
[Fri Aug 17 06:06:07 2012] Source does appear to be extended
[Fri Aug 17 06:06:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 07:04:16 2012] XMMSAS src. selection expression = ellipse(27085.094940, 32050.249298, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 17 07:04:16 2012] Writing source region out to fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src22_src.reg
[Fri Aug 17 07:04:16 2012] Extracting stamp from image fullrun_mos2_xmm0604010801_pi300-10000_cl_sm2.00.img.gz, (274, 331) - (349, 406)
[Fri Aug 17 07:04:16 2012] XMMSAS bgd. selection expression = annulus(27085.094940, 32050.249298, 1087.500000, 2175.000000, X, Y) && !ellipse(26597.387299, 32648.517670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25683.792000, 32370.886000, 1180.864034, 1180.864034, 0.000000, X, Y) && !ellipse(27219.588000, 34767.012000, 3430.544099, 3430.544099, 0.000000, X, Y) && !ellipse(26302.843658, 31892.245850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28463.907410, 30254.135254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26560.370000, 31407.316600, 1390.816040, 1390.816040, 0.000000, X, Y) && !ellipse(27113.260000, 31033.312000, 2781.632080, 2781.632080, 0.000000, X, Y) && !ellipse(28255.052000, 35483.624000, 1715.272049, 1715.272049, 0.000000, X, Y)
[Fri Aug 17 07:04:16 2012] Writing fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src22.gif
[Fri Aug 17 07:08:01 2012] Mean detx,y = (6108.40, -5393.35) 
[Fri Aug 17 07:08:01 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 07:08:09 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 07:08:09 2012] Setting source spectrum file to fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Fri Aug 17 07:08:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Fri Aug 17 07:31:18 2012] Not generating rmf since there are only 98 counts
[Fri Aug 17 07:31:18 2012] rmf not generated due to insufficient counts
[Fri Aug 17 07:46:19 2012] Updating aperture counts using extracted products
[Fri Aug 17 07:46:19 2012] Error reading totcts from fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Fri Aug 17 07:46:20 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 07:46:20 2012] Using photon index=1.80, rate=0.0083, arf fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src22.arf
[Fri Aug 17 07:46:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 07:46:21 2012] Updating source flux to 1.3e-13
[Fri Aug 17 07:46:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting