[Thu Aug 16 20:32:42 2012] Detection parameters:
  Position = (312.2, 398.6) = 5 38 11.74 -55 55 39.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.2 +/- 17.1
  Background counts = 105.0
  Rate = 0.009 +/- 0.002

[Thu Aug 16 20:32:43 2012] Off-axis axis estimate = 7.33'
[Thu Aug 16 23:07:35 2012] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 23:07:35 2012] Initial guess for spatial extent in simple fitting = 10.09"
[Thu Aug 16 23:07:35 2012] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.911
[Thu Aug 16 23:07:35 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.09"
[Fri Aug 17 01:36:23 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src11.ximg exists
[Fri Aug 17 01:36:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src11.csv
[Fri Aug 17 01:36:23 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Aug 17 01:36:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src11.csv
[Fri Aug 17 01:36:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 01:36:24 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Aug 17 01:36:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri Aug 17 01:36:24 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Aug 17 01:36:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri Aug 17 01:36:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 01:36:45 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 11.705850 pixels away
[Fri Aug 17 01:36:45 2012] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 10.044819 pixels away
[Fri Aug 17 01:36:45 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 01:36:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 01:36:45 2012] Assessing source extent using major
[Fri Aug 17 01:36:45 2012] Source does appear to be extended
[Fri Aug 17 01:36:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 04:12:05 2012] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 04:12:05 2012] Initial guess for spatial extent in simple fitting = 10.09"
[Fri Aug 17 04:12:05 2012] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.911
[Fri Aug 17 04:12:05 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 10.09"
[Fri Aug 17 06:05:45 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src10.ximg exists
[Fri Aug 17 06:05:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src10.csv
[Fri Aug 17 06:05:45 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri Aug 17 06:05:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src10.csv
[Fri Aug 17 06:05:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 06:05:46 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri Aug 17 06:05:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri Aug 17 06:05:46 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Aug 17 06:05:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri Aug 17 06:05:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 06:06:06 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 10.388900 pixels away
[Fri Aug 17 06:06:06 2012] Spatial fit model total counts = 1755.770000, observed total counts = 1607.000000
[Fri Aug 17 06:06:06 2012] Offset between fit and detection position for source 20 = 1.984313 pixels
[Fri Aug 17 06:06:06 2012] Warning, changing simple spatial fit ID from 10 to 41
[Fri Aug 17 06:06:06 2012] 1761.324000 total counts/ 1309.060000 bgd. counts: snr = 12.500064
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 1.984313 pixels
  Position = (313.4, 400.2) = 5 38 11.12 -55 55 31.9
  Extent = 42.9 (42.9-85.8)", rotation angle = 0
  Source counts = 452.3 +/- 42.0
  Background counts = 1309.1
  Rate = 0.04 +/- 0.004
[Fri Aug 17 06:06:07 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 06:06:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 06:06:07 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 06:06:07 2012] Source does appear to be extended
[Fri Aug 17 06:06:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 06:06:07 2012] Source is confused with source 21
[Fri Aug 17 06:06:07 2012] Source is confused with source 16
[Fri Aug 17 06:06:07 2012] Source is confused with source 17
[Fri Aug 17 06:06:07 2012] Source is confused with source 18
[Fri Aug 17 07:04:16 2012] XMMSAS src. selection expression = ellipse(27219.588000, 34767.012000, 2572.908074, 2572.908074, 0.000000, X, Y)
[Fri Aug 17 07:04:16 2012] Writing source region out to fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src20_src.reg
[Fri Aug 17 07:04:16 2012] Extracting stamp from image fullrun_mos2_xmm0604010801_pi300-10000_cl_sm2.00.img.gz, (166, 252) - (461, 548)
[Fri Aug 17 07:04:16 2012] XMMSAS bgd. selection expression = annulus(27219.588000, 34767.012000, 4288.180123, 8576.360247, X, Y) && !ellipse(32003.411926, 26657.104218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22555.577789, 28991.119232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26597.387299, 32648.517670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25683.792000, 32370.886000, 1180.864034, 1180.864034, 0.000000, X, Y) && !ellipse(30534.360000, 27911.734000, 1166.872034, 1166.872034, 0.000000, X, Y) && !ellipse(27085.094940, 32050.249298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26302.843658, 31892.245850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28463.907410, 30254.135254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26560.370000, 31407.316600, 1390.816040, 1390.816040, 0.000000, X, Y) && !ellipse(27113.260000, 31033.312000, 2781.632080, 2781.632080, 0.000000, X, Y) && !ellipse(19772.752640, 26105.107697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33673.281982, 34896.804443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29481.390000, 36875.437200, 1421.792041, 1421.792041, 0.000000, X, Y) && !ellipse(30290.737488, 27671.805969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20245.573532, 25971.411041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28572.397217, 36527.040222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21585.187149, 27356.741608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28464.918976, 35895.546814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28255.052000, 35483.624000, 1715.272049, 1715.272049, 0.000000, X, Y)
[Fri Aug 17 07:04:16 2012] Writing fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src20.gif
[Fri Aug 17 07:06:30 2012] Mean detx,y = (8084.21, -7424.26) 
[Fri Aug 17 07:06:31 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 07:07:44 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 07:07:44 2012] Setting source spectrum file to fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Fri Aug 17 07:07:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Fri Aug 17 07:46:19 2012] Updating aperture counts using extracted products
[Fri Aug 17 07:46:19 2012] Error reading totcts from fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Fri Aug 17 07:46:20 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 07:46:20 2012] Using photon index=1.80, rate=0.0401, arf fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src20.arf
[Fri Aug 17 07:46:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 07:46:20 2012] Updating source flux to 6.6e-13
[Fri Aug 17 07:46:29 2012] Flag c found in src. 20 procflags, skipping spectral fitting