[Thu Aug 16 20:32:41 2012] Detection parameters:
  Position = (480.8, 213.2) = 5 36 43.91 -56 9 6.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.1 +/- 18.6
  Background counts = 72.7
  Rate = 0.006 +/- 0.001

[Thu Aug 16 20:32:43 2012] Off-axis axis estimate = 14.60'
[Thu Aug 16 23:07:35 2012] Using EEF radius (= 13.73 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 23:07:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug 16 23:07:35 2012] Initial guess for spatial extent in simple fitting = 13.73"
[Thu Aug 16 23:07:35 2012] source mask rpix=3.2, npix_max = 53, mask sum = 48, frac = 0.898
[Thu Aug 16 23:07:35 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 13.73"
[Fri Aug 17 01:36:23 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src28.ximg exists
[Fri Aug 17 01:36:23 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src28.csv
[Fri Aug 17 01:36:23 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src28_1.ximg exists
[Fri Aug 17 01:36:23 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src28.csv
[Fri Aug 17 01:36:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 01:36:24 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Fri Aug 17 01:36:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src28.csv
[Fri Aug 17 01:36:24 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Fri Aug 17 01:36:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src28.csv
[Fri Aug 17 01:36:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 01:36:45 2012] Warning, spatial fit 28 centroid is now closest to src. 53
[Fri Aug 17 01:36:45 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 01:36:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 01:36:45 2012] Assessing source extent using major
[Fri Aug 17 01:36:45 2012] Source does appear to be extended
[Fri Aug 17 01:36:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 04:12:05 2012] Using EEF radius (= 13.73 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 04:12:05 2012] Initial guess for spatial extent in simple fitting = 13.73"
[Fri Aug 17 04:12:05 2012] source mask rpix=3.2, npix_max = 53, mask sum = 48, frac = 0.898
[Fri Aug 17 04:12:05 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 13.73"
[Fri Aug 17 06:05:45 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src27.ximg exists
[Fri Aug 17 06:05:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src27.csv
[Fri Aug 17 06:05:45 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri Aug 17 06:05:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src27.csv
[Fri Aug 17 06:05:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 06:05:46 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri Aug 17 06:05:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src27.csv
[Fri Aug 17 06:05:46 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Aug 17 06:05:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src27.csv
[Fri Aug 17 06:05:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 06:06:06 2012] Warning, spatial fit 27 centroid is now closest to src. 53
[Fri Aug 17 06:06:07 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 06:06:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 06:06:07 2012] Assessing source extent using major
[Fri Aug 17 06:06:07 2012] Source does appear to be extended
[Fri Aug 17 06:06:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 07:04:16 2012] XMMSAS src. selection expression = ellipse(41784.651367, 18497.246033, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 17 07:04:16 2012] Writing source region out to fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src2_src.reg
[Fri Aug 17 07:04:16 2012] Extracting stamp from image fullrun_mos2_xmm0604010801_pi300-10000_cl_sm2.00.img.gz, (443, 176) - (518, 251)
[Fri Aug 17 07:04:16 2012] XMMSAS bgd. selection expression = annulus(41784.651367, 18497.246033, 1087.500000, 2175.000000, X, Y) && !ellipse(41042.283936, 16564.270538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41205.201843, 20834.970123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41846.237427, 20149.493332, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 17 07:04:16 2012] Writing fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src2.gif
[Fri Aug 17 07:12:12 2012] Mean detx,y = (7895.91, 14394.91) 
[Fri Aug 17 07:12:12 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 07:12:20 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 07:12:20 2012] Setting source spectrum file to fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Aug 17 07:12:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Aug 17 07:36:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 17 07:36:36 2012] rmf not generated due to insufficient counts
[Fri Aug 17 07:46:20 2012] Updating aperture counts using extracted products
[Fri Aug 17 07:46:20 2012] Error reading totcts from fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Aug 17 07:46:21 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 07:46:21 2012] Using photon index=1.80, rate=0.00629, arf fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src2.arf
[Fri Aug 17 07:46:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 07:46:21 2012] Updating source flux to 2.5e-13
[Fri Aug 17 07:46:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting