[Thu Aug 16 20:32:41 2012] Detection parameters:
  Position = (329.0, 420.4) = 5 38 3.08 -55 54 3.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.7 +/- 19.5
  Background counts = 101.0
  Rate = 0.006 +/- 0.001

[Thu Aug 16 20:32:43 2012] Off-axis axis estimate = 9.12'
[Thu Aug 16 23:07:35 2012] Using EEF radius (= 10.99 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 23:07:35 2012] Initial guess for spatial extent in simple fitting = 10.99"
[Thu Aug 16 23:07:35 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.983
[Thu Aug 16 23:07:35 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 10.99"
[Fri Aug 17 01:36:23 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src35.ximg exists
[Fri Aug 17 01:36:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src35.csv
[Fri Aug 17 01:36:23 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src35_1.ximg exists
[Fri Aug 17 01:36:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src35.csv
[Fri Aug 17 01:36:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 01:36:24 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Fri Aug 17 01:36:24 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Fri Aug 17 01:36:24 2012] Fit fullrun_mos2_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Fri Aug 17 01:36:45 2012] Warning, spatial fit 35 centroid is now closest to src. 15
[Fri Aug 17 01:36:45 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 01:36:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 01:36:45 2012] Assessing source extent using major
[Fri Aug 17 01:36:45 2012] Source does appear to be extended
[Fri Aug 17 01:36:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 01:36:45 2012] Source is confused with source 17
[Fri Aug 17 01:36:45 2012] Source is confused with source 18
[Fri Aug 17 04:12:05 2012] Using EEF radius (= 10.99 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 04:12:05 2012] Initial guess for spatial extent in simple fitting = 10.99"
[Fri Aug 17 04:12:05 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.983
[Fri Aug 17 04:12:05 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 10.99"
[Fri Aug 17 06:05:45 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src34.ximg exists
[Fri Aug 17 06:05:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src34.csv
[Fri Aug 17 06:05:45 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src34_1.ximg exists
[Fri Aug 17 06:05:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src34.csv
[Fri Aug 17 06:05:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 06:05:46 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Fri Aug 17 06:05:46 2012] fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Fri Aug 17 06:05:46 2012] Fit fullrun_mos2_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Fri Aug 17 06:06:06 2012] Source 16 is offset by -6.520722 and -4.593239 pixels which is larger than
2 X fitted extent = 1.262818 x 1.262818, not incorporating fit results
[Fri Aug 17 06:06:07 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 06:06:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 06:06:07 2012] Assessing source extent using major
[Fri Aug 17 06:06:07 2012] Source does appear to be extended
[Fri Aug 17 06:06:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 07:04:16 2012] XMMSAS src. selection expression = ellipse(28572.397217, 36527.040222, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 17 07:04:16 2012] Writing source region out to fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src16_src.reg
[Fri Aug 17 07:04:16 2012] Extracting stamp from image fullrun_mos2_xmm0604010801_pi300-10000_cl_sm2.00.img.gz, (291, 383) - (366, 458)
[Fri Aug 17 07:04:16 2012] XMMSAS bgd. selection expression = annulus(28572.397217, 36527.040222, 1087.500000, 2175.000000, X, Y) && !ellipse(27219.588000, 34767.012000, 3430.544099, 3430.544099, 0.000000, X, Y) && !ellipse(29481.390000, 36875.437200, 1421.792041, 1421.792041, 0.000000, X, Y) && !ellipse(28464.918976, 35895.546814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28255.052000, 35483.624000, 1715.272049, 1715.272049, 0.000000, X, Y)
[Fri Aug 17 07:04:16 2012] Writing fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src16.gif
[Fri Aug 17 07:14:02 2012] Mean detx,y = (10263.18, -7699.84) 
[Fri Aug 17 07:14:02 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 07:14:08 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 07:14:08 2012] Setting source spectrum file to fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Aug 17 07:14:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Fri Aug 17 07:40:30 2012] Not generating rmf since there are only 97 counts
[Fri Aug 17 07:40:30 2012] rmf not generated due to insufficient counts
[Fri Aug 17 07:46:20 2012] Updating aperture counts using extracted products
[Fri Aug 17 07:46:20 2012] Error reading totcts from fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Aug 17 07:46:21 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 07:46:21 2012] Using photon index=1.80, rate=0.00558, arf fullrun_mos2_xmm0604010801_pi300-10000_pass1_cl_src16.arf
[Fri Aug 17 07:46:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 07:46:21 2012] Updating source flux to 1.2e-13
[Fri Aug 17 07:46:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting