[Thu Aug 16 20:32:08 2012] Detection parameters:
  Position = (251.9, 324.1) = 5 38 43.01 -56 1 11.8
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 147.2 +/- 21.7
  Background counts = 625.2
  Rate = 0.02 +/- 0.002

[Thu Aug 16 20:32:08 2012] Off-axis axis estimate = 3.85'
[Thu Aug 16 22:57:58 2012] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 22:57:58 2012] Initial guess for spatial extent in simple fitting = 8.35"
[Thu Aug 16 22:57:58 2012] source mask rpix=1.9, npix_max = 23, mask sum = 17, frac = 0.725
[Thu Aug 16 22:57:58 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.35"
[Thu Aug 16 23:07:35 2012] fullrun_mos1_xmm0604010801_pi300-10000_cl_pass0_src2.ximg exists
[Thu Aug 16 23:07:35 2012] fullrun_mos1_xmm0604010801_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Aug 16 23:07:35 2012] Fit fullrun_mos1_xmm0604010801_pi300-10000_cl_pass0_src2 appears to have run properly
[Thu Aug 16 23:07:35 2012] fullrun_mos1_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Aug 16 23:07:35 2012] fullrun_mos1_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Aug 16 23:07:35 2012] Fit fullrun_mos1_xmm0604010801_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Aug 17 01:36:35 2012] Spatial fit model total counts = 753.253000, observed total counts = 712.000000
[Fri Aug 17 01:36:35 2012] Offset between fit and detection position for source 6 = 2.722205 pixels
[Fri Aug 17 01:36:35 2012] 749.742500 total counts/ 677.392000 bgd. counts: snr = 2.779851
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 2.722205 pixels
  Position = (251.1, 326.7) = 5 38 43.43 -56 0 51.4
  Extent = 16.7 (8.7-33.4)" x 5.9 (2.9-10.1)", rotation angle = 323 (300-344) degrees
  Source counts = 72.4 +/- 27.4
  Background counts = 677.4
  Rate = 0.007 +/- 0.003
[Fri Aug 17 01:36:35 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 01:36:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 01:36:35 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 01:36:35 2012] Source does appear to be extended
[Fri Aug 17 01:36:35 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.86
[Fri Aug 17 04:04:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 17 04:04:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 17 04:04:52 2012] Initial guess for spatial extent in simple fitting = 11.32"
[Fri Aug 17 04:04:52 2012] source mask rpix=2.6, npix_max = 38, mask sum = 35, frac = 0.909
[Fri Aug 17 04:04:52 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.32"
[Fri Aug 17 04:12:05 2012] fullrun_mos1_xmm0604010801_pi300-10000_cl_pass1_src2.ximg exists
[Fri Aug 17 04:12:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604010801_pi300-10000_cl_pass1_src2.csv
[Fri Aug 17 04:12:05 2012] fullrun_mos1_xmm0604010801_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Aug 17 04:12:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604010801_pi300-10000_cl_pass1_src2.csv
[Fri Aug 17 04:12:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604010801_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604010801_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 04:12:05 2012] fullrun_mos1_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Aug 17 04:12:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Aug 17 04:12:05 2012] fullrun_mos1_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Aug 17 04:12:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Aug 17 04:12:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604010801_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 06:05:57 2012] Warning, spatial fit 2 centroid is now closest to src. 5
[Fri Aug 17 06:05:57 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 06:05:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 06:05:57 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 06:05:57 2012] Source does appear to be extended
[Fri Aug 17 06:05:57 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.86
[Fri Aug 17 06:57:26 2012] XMMSAS src. selection expression = ellipse(21798.711600, 28374.448600, 1002.480029, 356.339410, 322.747610, X, Y)
[Fri Aug 17 06:57:26 2012] Writing source region out to fullrun_mos1_xmm0604010801_pi300-10000_pass1_cl_src6_src.reg
[Fri Aug 17 06:57:26 2012] Extracting stamp from image fullrun_mos1_xmm0604010801_pi300-10000_cl_sm2.00.img.gz, (194, 269) - (309, 384)
[Fri Aug 17 06:57:26 2012] XMMSAS bgd. selection expression = annulus(21798.711600, 28374.448600, 1670.800048, 3341.600096, X, Y)
[Fri Aug 17 06:57:26 2012] Writing fullrun_mos1_xmm0604010801_pi300-10000_pass1_cl_src6.gif
[Fri Aug 17 06:57:41 2012] Mean detx,y = (-5820.72, -19.47) 
[Fri Aug 17 06:57:42 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 06:58:05 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 06:58:05 2012] Setting source spectrum file to fullrun_mos1_xmm0604010801_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Aug 17 06:58:05 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604010801_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Aug 17 07:03:31 2012] Not generating rmf since there are only 72 counts
[Fri Aug 17 07:03:31 2012] rmf not generated due to insufficient counts
[Fri Aug 17 07:46:19 2012] Updating aperture counts using extracted products
[Fri Aug 17 07:46:19 2012] Error reading totcts from fullrun_mos1_xmm0604010801_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Aug 17 07:46:19 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 07:46:19 2012] Using photon index=1.80, rate=0.00696, arf fullrun_mos1_xmm0604010801_pi300-10000_pass1_cl_src6.arf
[Fri Aug 17 07:46:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 07:46:19 2012] Updating source flux to 9.3e-14
[Fri Aug 17 07:46:22 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting