[Fri Jun  7 01:15:14 2013] Detection parameters:
  Position = (470.1, 295.3) = 5 50 15.91 -51 55 57.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 198.2 +/- 19.2
  Background counts = 88.2
  Rate = 0.008 +/- 0.0008

[Fri Jun  7 01:15:14 2013] Off-axis axis estimate = 12.45'
[Fri Jun  7 01:19:09 2013] Using EEF radius (= 12.65 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 01:19:09 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  7 01:19:09 2013] Initial guess for spatial extent in simple fitting = 12.65"
[Fri Jun  7 01:19:09 2013] source mask rpix=2.9, npix_max = 46, mask sum = 39, frac = 0.839
[Fri Jun  7 01:19:09 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 12.65"
[Fri Jun  7 01:29:44 2013] fullrun_pn_xmm0604010401_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun  7 01:29:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010401_pi300-10000_cl_pass0_src1.csv
[Fri Jun  7 01:29:44 2013] fullrun_pn_xmm0604010401_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun  7 01:29:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010401_pi300-10000_cl_pass0_src1.csv
[Fri Jun  7 01:29:44 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604010401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604010401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 01:29:44 2013] fullrun_pn_xmm0604010401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun  7 01:29:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jun  7 01:29:44 2013] fullrun_pn_xmm0604010401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun  7 01:29:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jun  7 01:29:44 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604010401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604010401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 01:48:54 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 16.137810 pixels away
[Fri Jun  7 01:48:54 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 01:48:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 01:48:54 2013] Assessing source extent using major
[Fri Jun  7 01:48:54 2013] Source does appear to be extended
[Fri Jun  7 01:48:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 01:49:05 2013] Using EEF radius (= 12.65 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 01:49:05 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  7 01:49:05 2013] Initial guess for spatial extent in simple fitting = 12.65"
[Fri Jun  7 01:49:05 2013] source mask rpix=2.9, npix_max = 46, mask sum = 39, frac = 0.839
[Fri Jun  7 01:49:05 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 12.65"
[Fri Jun  7 01:59:13 2013] fullrun_pn_xmm0604010401_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun  7 01:59:13 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604010401_pi300-10000_cl_pass1_src1.csv
[Fri Jun  7 01:59:13 2013] fullrun_pn_xmm0604010401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun  7 01:59:13 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604010401_pi300-10000_cl_pass1_src1.csv
[Fri Jun  7 01:59:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604010401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604010401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 01:59:13 2013] fullrun_pn_xmm0604010401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun  7 01:59:13 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604010401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jun  7 01:59:13 2013] fullrun_pn_xmm0604010401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun  7 01:59:13 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604010401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jun  7 01:59:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604010401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604010401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 02:12:30 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.632005 pixels away
[Fri Jun  7 02:12:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 02:12:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 02:12:30 2013] Assessing source extent using major
[Fri Jun  7 02:12:30 2013] Source does appear to be extended
[Fri Jun  7 02:12:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 02:12:40 2013] XMMSAS src. selection expression = ellipse(40851.549286, 25646.509796, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun  7 02:12:40 2013] Writing source region out to fullrun_pn_xmm0604010401_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun  7 02:12:40 2013] Extracting stamp from image fullrun_pn_xmm0604010401_pi300-10000_cl_sm2.00.img.gz, (433, 258) - (508, 333)
[Fri Jun  7 02:12:40 2013] XMMSAS bgd. selection expression = annulus(40851.549286, 25646.509796, 1087.500000, 2175.000000, X, Y)
[Fri Jun  7 02:12:40 2013] Writing fullrun_pn_xmm0604010401_pi300-10000_pass1_cl_src1.gif
[Fri Jun  7 02:12:48 2013] Mean detx,y = (7981.19, 13290.81) 
[Fri Jun  7 02:12:53 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  7 02:13:32 2013] Binned source spectrum to 10 counts/bin
[Fri Jun  7 02:13:32 2013] Setting source spectrum file to fullrun_pn_xmm0604010401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun  7 02:13:32 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604010401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun  7 02:16:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun  7 02:16:28 2013] rmf not generated due to insufficient counts
[Fri Jun  7 02:21:23 2013] Updating aperture counts using extracted products
[Fri Jun  7 02:21:23 2013] Total counts from fullrun_pn_xmm0604010401_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 154.00
[Fri Jun  7 02:21:23 2013] Total counts from fullrun_pn_xmm0604010401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 435.00
[Fri Jun  7 02:21:23 2013] Got source and background scale factors 687949.000000, 2862466.000000
[Fri Jun  7 02:21:23 2013] User source parameters:
  Position = (470.1, 295.3) = 5 50 15.91 -51 55 57.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 49.5 +/- 13.4
  Background aperture counts = 104.5
  Rate = 0.006 +/- 0.002

[Fri Jun  7 02:21:23 2013] Updating counts from extracted products
[Fri Jun  7 02:21:23 2013] Set source signif. to 49.45/10.22 = 4.84
[Fri Jun  7 02:21:25 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun  7 02:21:25 2013] Using photon index=1.80, rate=0.00564, arf fullrun_pn_xmm0604010401_pi300-10000_pass1_cl_src1.arf
[Fri Jun  7 02:21:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  7 02:21:25 2013] Updating source flux to 5.2e-14
[Fri Jun  7 02:21:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun  7 02:21:32 2013] xmm0604010401/analysis//spectral/fullrun_pn_xmm0604010401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete