[Sun Jun 24 11:06:42 2012] Detection parameters:
  Position = (342.7, 340.3) = 5 59 14.94 -52 47 50.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 717.0 +/- 34.8
  Background counts = 150.3
  Rate = 0.04 +/- 0.002

[Sun Jun 24 11:06:42 2012] Off-axis axis estimate = 4.42'
[Sun Jun 24 11:10:25 2012] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 11:10:25 2012] Initial guess for spatial extent in simple fitting = 8.64"
[Sun Jun 24 11:10:25 2012] source mask rpix=2.0, npix_max = 24, mask sum = 21, frac = 0.850
[Sun Jun 24 11:10:25 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.64"
[Sun Jun 24 11:26:29 2012] fullrun_pn_xmm0604010301_pi300-10000_cl_pass0_src5.ximg exists
[Sun Jun 24 11:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010301_pi300-10000_cl_pass0_src5.csv
[Sun Jun 24 11:26:29 2012] fullrun_pn_xmm0604010301_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Jun 24 11:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010301_pi300-10000_cl_pass0_src5.csv
[Sun Jun 24 11:26:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604010301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604010301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 11:26:29 2012] fullrun_pn_xmm0604010301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Jun 24 11:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010301_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Jun 24 11:26:29 2012] fullrun_pn_xmm0604010301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Jun 24 11:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010301_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Jun 24 11:26:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604010301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604010301_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 12:19:58 2012] Spatial fit model total counts = 1145.480000, observed total counts = 907.000000
[Sun Jun 24 12:19:58 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 24 12:19:58 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 12:19:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 12:19:58 2012] Assessing source extent using major
[Sun Jun 24 12:19:58 2012] Source does appear to be extended
[Sun Jun 24 12:19:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 12:20:10 2012] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 12:20:10 2012] Initial guess for spatial extent in simple fitting = 8.64"
[Sun Jun 24 12:20:10 2012] source mask rpix=2.0, npix_max = 24, mask sum = 21, frac = 0.850
[Sun Jun 24 12:20:10 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 8.64"
[Sun Jun 24 12:36:27 2012] fullrun_pn_xmm0604010301_pi300-10000_cl_pass1_src5.ximg exists
[Sun Jun 24 12:36:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010301_pi300-10000_cl_pass1_src5.csv
[Sun Jun 24 12:36:27 2012] fullrun_pn_xmm0604010301_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Jun 24 12:36:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010301_pi300-10000_cl_pass1_src5.csv
[Sun Jun 24 12:36:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604010301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604010301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 12:36:27 2012] fullrun_pn_xmm0604010301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Jun 24 12:36:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010301_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Jun 24 12:36:27 2012] fullrun_pn_xmm0604010301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Jun 24 12:36:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010301_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Jun 24 12:36:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604010301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604010301_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 13:27:25 2012] Spatial fit model total counts = 1147.440000, observed total counts = 907.000000
[Sun Jun 24 13:27:25 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 24 13:27:25 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 13:27:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 13:27:25 2012] Assessing source extent using major
[Sun Jun 24 13:27:25 2012] Source does appear to be extended
[Sun Jun 24 13:27:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 13:27:40 2012] XMMSAS src. selection expression = ellipse(29768.259583, 29555.984680, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 24 13:27:40 2012] Writing source region out to fullrun_pn_xmm0604010301_pi300-10000_pass1_cl_src5_src.reg
[Sun Jun 24 13:27:40 2012] Extracting stamp from image fullrun_pn_xmm0604010301_pi300-10000_cl_sm2.00.img.gz, (305, 303) - (380, 378)
[Sun Jun 24 13:27:40 2012] XMMSAS bgd. selection expression = annulus(29768.259583, 29555.984680, 1087.500000, 2175.000000, X, Y)
[Sun Jun 24 13:27:40 2012] Writing fullrun_pn_xmm0604010301_pi300-10000_pass1_cl_src5.gif
[Sun Jun 24 13:30:44 2012] Mean detx,y = (3958.01, 3296.53) 
[Sun Jun 24 13:30:46 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 13:31:14 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 13:31:15 2012] Setting source spectrum file to fullrun_pn_xmm0604010301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jun 24 13:31:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604010301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Jun 24 13:40:40 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 24 13:40:40 2012] rmf not generated due to insufficient counts
[Sun Jun 24 15:16:54 2012] Updating aperture counts using extracted products
[Sun Jun 24 15:16:54 2012] Error reading totcts from fullrun_pn_xmm0604010301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jun 24 15:16:55 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 15:16:55 2012] Using photon index=1.80, rate=0.0421, arf fullrun_pn_xmm0604010301_pi300-10000_pass1_cl_src5.arf
[Sun Jun 24 15:16:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 15:16:55 2012] Updating source flux to 1.4e-13
[Sun Jun 24 15:18:03 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting