[Sun Jun 24 11:06:42 2012] Detection parameters:
  Position = (181.4, 262.4) = 6 0 32.43 -52 53 26.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 109.8 +/- 19.9
  Background counts = 148.3
  Rate = 0.005 +/- 0.0008

[Sun Jun 24 11:06:42 2012] Off-axis axis estimate = 8.88'
[Sun Jun 24 11:10:25 2012] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 11:10:25 2012] Initial guess for spatial extent in simple fitting = 10.87"
[Sun Jun 24 11:10:25 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.001
[Sun Jun 24 11:10:25 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 10.87"
[Sun Jun 24 11:26:29 2012] fullrun_pn_xmm0604010301_pi300-10000_cl_pass0_src9.ximg exists
[Sun Jun 24 11:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010301_pi300-10000_cl_pass0_src9.csv
[Sun Jun 24 11:26:29 2012] fullrun_pn_xmm0604010301_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Jun 24 11:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010301_pi300-10000_cl_pass0_src9.csv
[Sun Jun 24 11:26:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604010301_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604010301_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 11:26:29 2012] fullrun_pn_xmm0604010301_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Jun 24 11:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010301_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun Jun 24 11:26:29 2012] fullrun_pn_xmm0604010301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Jun 24 11:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010301_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun Jun 24 11:26:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604010301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604010301_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 12:19:58 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 13.443252 pixels away
[Sun Jun 24 12:19:58 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 12:19:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 12:19:58 2012] Assessing source extent using major
[Sun Jun 24 12:19:58 2012] Source does appear to be extended
[Sun Jun 24 12:19:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 12:20:10 2012] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 12:20:10 2012] Initial guess for spatial extent in simple fitting = 10.87"
[Sun Jun 24 12:20:10 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.001
[Sun Jun 24 12:20:10 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 10.87"
[Sun Jun 24 12:36:27 2012] fullrun_pn_xmm0604010301_pi300-10000_cl_pass1_src9.ximg exists
[Sun Jun 24 12:36:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010301_pi300-10000_cl_pass1_src9.csv
[Sun Jun 24 12:36:27 2012] fullrun_pn_xmm0604010301_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun Jun 24 12:36:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010301_pi300-10000_cl_pass1_src9.csv
[Sun Jun 24 12:36:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604010301_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604010301_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 12:36:27 2012] fullrun_pn_xmm0604010301_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun Jun 24 12:36:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010301_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sun Jun 24 12:36:27 2012] fullrun_pn_xmm0604010301_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Jun 24 12:36:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010301_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sun Jun 24 12:36:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604010301_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604010301_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 13:27:25 2012] Spatial fit model total counts = 720.825000, observed total counts = 610.000000
[Sun Jun 24 13:27:25 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 24 13:27:25 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 13:27:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 13:27:25 2012] Assessing source extent using major
[Sun Jun 24 13:27:25 2012] Source does appear to be extended
[Sun Jun 24 13:27:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 13:27:40 2012] XMMSAS src. selection expression = ellipse(15733.639313, 22783.469574, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 24 13:27:40 2012] Writing source region out to fullrun_pn_xmm0604010301_pi300-10000_pass1_cl_src10_src.reg
[Sun Jun 24 13:27:40 2012] Extracting stamp from image fullrun_pn_xmm0604010301_pi300-10000_cl_sm2.00.img.gz, (144, 225) - (219, 300)
[Sun Jun 24 13:27:41 2012] XMMSAS bgd. selection expression = annulus(15733.639313, 22783.469574, 1087.500000, 2175.000000, X, Y) && !ellipse(16958.824200, 20633.176000, 483.512014, 483.512014, 0.000000, X, Y)
[Sun Jun 24 13:27:41 2012] Writing fullrun_pn_xmm0604010301_pi300-10000_pass1_cl_src10.gif
[Sun Jun 24 13:34:56 2012] Mean detx,y = (-8458.28, -6234.72) 
[Sun Jun 24 13:35:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 13:35:38 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 13:35:38 2012] Setting source spectrum file to fullrun_pn_xmm0604010301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Jun 24 13:35:38 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604010301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Jun 24 14:01:37 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 24 14:01:37 2012] rmf not generated due to insufficient counts
[Sun Jun 24 15:16:54 2012] Updating aperture counts using extracted products
[Sun Jun 24 15:16:54 2012] Error reading totcts from fullrun_pn_xmm0604010301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Jun 24 15:16:55 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 15:16:55 2012] Using photon index=1.80, rate=0.00451, arf fullrun_pn_xmm0604010301_pi300-10000_pass1_cl_src10.arf
[Sun Jun 24 15:16:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 15:16:55 2012] Updating source flux to 2.4e-14
[Sun Jun 24 15:18:03 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting