[Sun Jun 24 11:07:36 2012] Detection parameters:
  Position = (284.3, 332.7) = 5 59 42.94 -52 48 23.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.9 +/- 10.0
  Background counts = 20.8
  Rate = 0.002 +/- 0.0004

[Sun Jun 24 11:07:36 2012] Off-axis axis estimate = 2.68'
[Sun Jun 24 11:42:17 2012] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 11:42:17 2012] Initial guess for spatial extent in simple fitting = 7.77"
[Sun Jun 24 11:42:17 2012] source mask rpix=1.8, npix_max = 20, mask sum = 21, frac = 1.004
[Sun Jun 24 11:42:17 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 7.77"
[Sun Jun 24 12:19:53 2012] fullrun_mos2_xmm0604010301_pi300-10000_cl_pass0_src17.ximg exists
[Sun Jun 24 12:19:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010301_pi300-10000_cl_pass0_src17.csv
[Sun Jun 24 12:19:53 2012] fullrun_mos2_xmm0604010301_pi300-10000_cl_pass0_src17_1.ximg exists
[Sun Jun 24 12:19:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010301_pi300-10000_cl_pass0_src17.csv
[Sun Jun 24 12:19:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010301_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010301_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 12:19:53 2012] fullrun_mos2_xmm0604010301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sun Jun 24 12:19:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010301_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sun Jun 24 12:19:53 2012] fullrun_mos2_xmm0604010301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sun Jun 24 12:19:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010301_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sun Jun 24 12:19:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010301_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 12:20:04 2012] Source 9 is offset by -5.687223 and -7.037251 pixels which is larger than
2 X fitted extent = 0.893191 x 0.893191, not incorporating fit results
[Sun Jun 24 12:20:04 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 12:20:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 12:20:04 2012] Assessing source extent using major
[Sun Jun 24 12:20:04 2012] Source does appear to be extended
[Sun Jun 24 12:20:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 13:05:02 2012] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 13:05:02 2012] Initial guess for spatial extent in simple fitting = 7.77"
[Sun Jun 24 13:05:02 2012] source mask rpix=1.8, npix_max = 20, mask sum = 21, frac = 1.004
[Sun Jun 24 13:05:02 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 7.77"
[Sun Jun 24 13:27:22 2012] fullrun_mos2_xmm0604010301_pi300-10000_cl_pass1_src13.ximg exists
[Sun Jun 24 13:27:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010301_pi300-10000_cl_pass1_src13.csv
[Sun Jun 24 13:27:22 2012] fullrun_mos2_xmm0604010301_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun Jun 24 13:27:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010301_pi300-10000_cl_pass1_src13.csv
[Sun Jun 24 13:27:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010301_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010301_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 13:27:22 2012] fullrun_mos2_xmm0604010301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun Jun 24 13:27:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010301_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sun Jun 24 13:27:22 2012] fullrun_mos2_xmm0604010301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun Jun 24 13:27:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604010301_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sun Jun 24 13:27:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604010301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604010301_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 13:27:31 2012] Source 9 is offset by -0.724805 and -8.470217 pixels which is larger than
2 X fitted extent = 3.208855 x 3.208855, not incorporating fit results
[Sun Jun 24 13:27:31 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 13:27:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 13:27:31 2012] Assessing source extent using major
[Sun Jun 24 13:27:31 2012] Source does appear to be extended
[Sun Jun 24 13:27:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 14:47:04 2012] XMMSAS src. selection expression = ellipse(24689.257568, 28894.253143, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 24 14:47:04 2012] Writing source region out to fullrun_mos2_xmm0604010301_pi300-10000_pass1_cl_src9_src.reg
[Sun Jun 24 14:47:04 2012] Extracting stamp from image fullrun_mos2_xmm0604010301_pi300-10000_cl_sm2.00.img.gz, (247, 295) - (322, 370)
[Sun Jun 24 14:47:04 2012] XMMSAS bgd. selection expression = annulus(24689.257568, 28894.253143, 1087.500000, 2175.000000, X, Y) && !ellipse(24668.806000, 27215.076000, 2209.040064, 2209.040064, 0.000000, X, Y) && !ellipse(24110.422000, 26906.672000, 1172.672034, 1172.672034, 0.000000, X, Y)
[Sun Jun 24 14:47:04 2012] Writing fullrun_mos2_xmm0604010301_pi300-10000_pass1_cl_src9.gif
[Sun Jun 24 14:50:54 2012] Mean detx,y = (-882.53, 818.81) 
[Sun Jun 24 14:50:55 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 14:51:04 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 14:51:04 2012] Setting source spectrum file to fullrun_mos2_xmm0604010301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun Jun 24 14:51:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604010301_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sun Jun 24 15:16:01 2012] Not generating rmf since there are only 46 counts
[Sun Jun 24 15:16:01 2012] rmf not generated due to insufficient counts
[Sun Jun 24 15:16:55 2012] Updating aperture counts using extracted products
[Sun Jun 24 15:16:55 2012] Error reading totcts from fullrun_mos2_xmm0604010301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun Jun 24 15:16:55 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 15:16:55 2012] Using photon index=1.80, rate=0.002, arf fullrun_mos2_xmm0604010301_pi300-10000_pass1_cl_src9.arf
[Sun Jun 24 15:16:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 15:16:55 2012] Updating source flux to 2e-14
[Sun Jun 24 15:17:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting