[Wed Jun 5 01:04:24 2013] Detection parameters: Position = (337.2, 285.0) = 23 36 47.51 -59 42 28.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 403.9 +/- 27.5 Background counts = 83.5 Rate = 0.03 +/- 0.002 [Wed Jun 5 01:04:26 2013] Off-axis axis estimate = 2.98' [Wed Jun 5 01:08:34 2013] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting [Wed Jun 5 01:08:34 2013] Initial guess for spatial extent in simple fitting = 7.92" [Wed Jun 5 01:08:34 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.929 [Wed Jun 5 01:08:34 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 7.92" [Wed Jun 5 02:32:46 2013] fullrun_pn_xmm0604010201_pi300-10000_cl_pass0_src11.ximg exists [Wed Jun 5 02:32:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010201_pi300-10000_cl_pass0_src11.csv [Wed Jun 5 02:32:46 2013] fullrun_pn_xmm0604010201_pi300-10000_cl_pass0_src11_1.ximg exists [Wed Jun 5 02:32:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010201_pi300-10000_cl_pass0_src11.csv [Wed Jun 5 02:32:46 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604010201_pi300-10000_cl_pass0_src11_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604010201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 02:32:46 2013] fullrun_pn_xmm0604010201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists [Wed Jun 5 02:32:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010201_pi300-10000_cl_pass0_tfrozen_src11.csv [Wed Jun 5 02:32:46 2013] fullrun_pn_xmm0604010201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists [Wed Jun 5 02:32:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604010201_pi300-10000_cl_pass0_tfrozen_src11.csv [Wed Jun 5 02:32:46 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0604010201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0604010201_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 03:51:47 2013] Source 11 is offset by 7.513574 and 6.279473 pixels which is larger than 2 X fitted extent = 7.279908 x 7.279908, not incorporating fit results [Wed Jun 5 03:51:47 2013] Source 11 is offset by 4.786516 and 4.446669 pixels which is larger than 2 X fitted extent = 0.944110 x 0.944110, not incorporating fit results [Wed Jun 5 03:51:47 2013] Vigneting correction estimate = 1.000000 [Wed Jun 5 03:51:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 5 03:51:47 2013] Assessing source extent using major [Wed Jun 5 03:51:47 2013] Source does appear to be extended [Wed Jun 5 03:51:47 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 5 03:52:12 2013] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting [Wed Jun 5 03:52:12 2013] Initial guess for spatial extent in simple fitting = 7.92" [Wed Jun 5 03:52:12 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.929 [Wed Jun 5 03:52:12 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 7.92" [Wed Jun 5 05:31:17 2013] fullrun_pn_xmm0604010201_pi300-10000_cl_pass1_src11.ximg exists [Wed Jun 5 05:31:17 2013] fullrun_pn_xmm0604010201_pi300-10000_cl_pass1_src11_1.ximg exists [Wed Jun 5 05:31:17 2013] Fit fullrun_pn_xmm0604010201_pi300-10000_cl_pass1_src11 appears to have run properly [Wed Jun 5 05:31:18 2013] fullrun_pn_xmm0604010201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists [Wed Jun 5 05:31:18 2013] fullrun_pn_xmm0604010201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists [Wed Jun 5 05:31:18 2013] Fit fullrun_pn_xmm0604010201_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly [Wed Jun 5 06:26:57 2013] Spatial fit model total counts = 667.108000, observed total counts = 626.000000 [Wed Jun 5 06:26:57 2013] Offset between fit and detection position for source 11 = 0.091667 pixels [Wed Jun 5 06:26:57 2013] 662.336000 total counts/ 488.123000 bgd. counts: snr = 7.885258 Spatial fit parameters: Offset between fit and detection position for source 11 = 0.091667 pixels Position = (337.1, 285.0) = 23 36 47.56 -59 42 28.0 Extent = 4.1 (3.5-4.7)", rotation angle = 0 Source counts = 174.2 +/- 25.7 Background counts = 488.1 Rate = 0.009 +/- 0.001 [Wed Jun 5 06:26:57 2013] Vigneting correction estimate = 1.000000 [Wed Jun 5 06:26:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 5 06:26:57 2013] Assessing source extent using major axis lower bound [Wed Jun 5 06:26:57 2013] Source does appear to be extended [Wed Jun 5 06:26:57 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 5 06:27:10 2013] XMMSAS src. selection expression = ellipse(29283.336600, 24743.722200, 246.363007, 246.363007, 0.000000, X, Y) [Wed Jun 5 06:27:10 2013] Writing source region out to fullrun_pn_xmm0604010201_pi300-10000_pass1_cl_src11_src.reg [Wed Jun 5 06:27:10 2013] Extracting stamp from image fullrun_pn_xmm0604010201_pi300-10000_cl_sm2.00.img.gz, (323, 271) - (351, 299) [Wed Jun 5 06:27:10 2013] XMMSAS bgd. selection expression = annulus(29283.336600, 24743.722200, 410.605012, 821.210024, X, Y) && !ellipse(29532.503601, 23619.033844, 870.000000, 870.000000, 0.000000, X, Y) [Wed Jun 5 06:27:10 2013] Writing fullrun_pn_xmm0604010201_pi300-10000_pass1_cl_src11.gif [Wed Jun 5 06:35:18 2013] Mean detx,y = (-4551.60, 2189.66) [Wed Jun 5 06:35:21 2013] Setting backscal keywords in source and bgd. spectrum [Wed Jun 5 06:35:38 2013] Binned source spectrum to 10 counts/bin [Wed Jun 5 06:35:39 2013] Setting source spectrum file to fullrun_pn_xmm0604010201_pi300-10000_pass1_cl_src11_src_b10.pi.gz [Wed Jun 5 06:35:39 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604010201_pi300-10000_pass1_cl_src11_bgd.pi.gz [Wed Jun 5 08:21:09 2013] Updating aperture counts using extracted products [Wed Jun 5 08:21:09 2013] Total counts from fullrun_pn_xmm0604010201_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 226.00 [Wed Jun 5 08:21:09 2013] Total counts from fullrun_pn_xmm0604010201_pi300-10000_pass1_cl_src11_bgd.pi.gz = 229.00 [Wed Jun 5 08:21:09 2013] Got source and background scale factors 190400.000000, 1053294.000000 [Wed Jun 5 08:21:09 2013] User source parameters: Position = (337.1, 285.0) = 23 36 47.56 -59 42 28.0 Extent = 4.1 (3.5-4.7)", rotation angle = 0 Source aperture counts = 184.6 +/- 16.1 Background aperture counts = 41.4 Rate = 0.01 +/- 0.0009 [Wed Jun 5 08:21:13 2013] Calculating source flux in energy range 0.30-8.00 [Wed Jun 5 08:21:13 2013] Using photon index=1.80, rate=0.00942, arf fullrun_pn_xmm0604010201_pi300-10000_pass1_cl_src11.arf [Wed Jun 5 08:21:13 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed Jun 5 08:21:13 2013] Updating source flux to 4.5e-14 [Wed Jun 5 08:21:26 2013] Flag b found in src. 11 procflags, skipping spectral fitting [Wed Jun 5 08:21:30 2013] xmm0604010201/analysis//spectral/fullrun_pn_xmm0604010201_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete