[Sat May 25 00:42:55 2013] Detection parameters:
  Position = (239.4, 325.0) = 0 13 20.54 5 38 28.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 179.6 +/- 19.6
  Background counts = 108.1
  Rate = 0.005 +/- 0.0005

[Sat May 25 00:42:56 2013] Off-axis axis estimate = 4.69'
[Sat May 25 00:43:46 2013] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:43:46 2013] Initial guess for spatial extent in simple fitting = 8.77"
[Sat May 25 00:43:46 2013] source mask rpix=2.0, npix_max = 25, mask sum = 21, frac = 0.829
[Sat May 25 00:43:46 2013] Giving source the simple spatial ID 47 for pass 0, mean size = 8.77"
[Sat May 25 00:43:59 2013] fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_src47.ximg exists
[Sat May 25 00:43:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_src47.csv
[Sat May 25 00:43:59 2013] fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_src47_1.ximg exists
[Sat May 25 00:43:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_src47.csv
[Sat May 25 00:43:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:44:08 2013] fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Sat May 25 00:44:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src47.csv
[Sat May 25 00:44:08 2013] fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Sat May 25 00:44:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src47.csv
[Sat May 25 00:44:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:44:43 2013] Spatial fit model total counts = 1110.420000, observed total counts = 928.000000
[Sat May 25 00:44:43 2013] Poor agreement between spatial fit and data for source 49
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 25 00:44:43 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:44:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:44:43 2013] Assessing source extent using major
[Sat May 25 00:44:43 2013] Source does appear to be extended
[Sat May 25 00:44:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 00:45:13 2013] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:45:13 2013] Initial guess for spatial extent in simple fitting = 8.77"
[Sat May 25 00:45:13 2013] source mask rpix=2.0, npix_max = 25, mask sum = 21, frac = 0.829
[Sat May 25 00:45:13 2013] Giving source the simple spatial ID 47 for pass 1, mean size = 8.77"
[Sat May 25 00:45:21 2013] fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_src47.ximg exists
[Sat May 25 00:45:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_src47.csv
[Sat May 25 00:45:21 2013] fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_src47_1.ximg exists
[Sat May 25 00:45:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_src47.csv
[Sat May 25 00:45:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:45:29 2013] fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Sat May 25 00:45:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src47.csv
[Sat May 25 00:45:29 2013] fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Sat May 25 00:45:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src47.csv
[Sat May 25 00:45:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:45:59 2013] Source 49 is offset by 0.744535 and 2.776066 pixels which is larger than
2 X fitted extent = 7.183741 x 1.739453, not incorporating fit results
[Sat May 25 00:45:59 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:45:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:45:59 2013] Assessing source extent using major
[Sat May 25 00:45:59 2013] Source does appear to be extended
[Sat May 25 00:45:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 00:46:38 2013] XMMSAS src. selection expression = ellipse(20782.550552, 28230.825043, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 25 00:46:38 2013] Not overwriting source region fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src49_src.reg
[Sat May 25 00:46:38 2013] Extracting stamp from image fullrun_pn_xmm0603980101_pi300-10000_cl_sm2.00.img.gz, (202, 288) - (277, 363)
[Sat May 25 00:46:38 2013] XMMSAS bgd. selection expression = annulus(20782.550552, 28230.825043, 1087.500000, 2175.000000, X, Y) && !ellipse(24221.588700, 24922.842200, 1389.105640, 1389.105640, 0.000000, X, Y) && !ellipse(20188.564743, 30287.729340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18886.369781, 30468.943054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18779.456000, 28421.688000, 339.794410, 339.794410, 0.000000, X, Y) && !ellipse(17962.852000, 27253.410000, 1549.336045, 1549.336045, 0.000000, X, Y)
[Sat May 25 00:46:38 2013] Writing fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src49.gif
[Sat May 25 01:44:19 2013] Mean detx,y = (4491.94, 1616.73) 
[Sat May 25 01:44:26 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 01:44:54 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 01:44:55 2013] Setting source spectrum file to fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Sat May 25 01:44:55 2013] Setting bgd. spectrum file to fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Sat May 25 03:33:03 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 25 03:33:03 2013] rmf not generated due to insufficient counts
[Sat May 25 03:52:05 2013] Updating aperture counts using extracted products
[Sat May 25 03:52:05 2013] Total counts from fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src49_src_b10.pi.gz = 688.00
[Sat May 25 03:52:05 2013] Total counts from fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src49_bgd.pi.gz = 3410.00
[Sat May 25 03:52:05 2013] Got source and background scale factors 1070137.000000, 6751365.000000
[Sat May 25 03:52:05 2013] User source parameters:
  Position = (239.4, 325.0) = 0 13 20.54 5 38 28.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 147.5 +/- 27.2
  Background aperture counts = 540.5
  Rate = 0.003 +/- 0.0005

[Sat May 25 03:52:05 2013] Updating counts from extracted products
[Sat May 25 03:52:05 2013] Set source signif. to 147.49/23.25 = 6.34
[Sat May 25 03:52:15 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 03:52:15 2013] Using photon index=1.80, rate=0.00277, arf fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src49.arf
[Sat May 25 03:52:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 03:52:15 2013] Updating source flux to 9.8e-15
[Sat May 25 03:53:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 25 03:53:30 2013] xmm0603980101/analysis//spectral/fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src49_pl.csv not found, spectral fit skipped or did not complete