[Sat May 25 00:42:49 2013] Detection parameters:
  Position = (138.4, 225.1) = 0 13 49.99 5 31 12.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 656.0 +/- 34.0
  Background counts = 90.2
  Rate = 0.01 +/- 0.0006

[Sat May 25 00:42:56 2013] Off-axis axis estimate = 12.76'
[Sat May 25 00:43:46 2013] Using EEF radius (= 12.81 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:43:46 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 25 00:43:46 2013] Initial guess for spatial extent in simple fitting = 12.81"
[Sat May 25 00:43:46 2013] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.032
[Sat May 25 00:43:46 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 12.81"
[Sat May 25 00:43:52 2013] fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_src3.ximg exists
[Sat May 25 00:43:53 2013] fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat May 25 00:43:53 2013] Fit fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_src3 appears to have run properly
[Sat May 25 00:44:01 2013] fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat May 25 00:44:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat May 25 00:44:02 2013] fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat May 25 00:44:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat May 25 00:44:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:44:43 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 17.546411 pixels away
[Sat May 25 00:44:43 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:44:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:44:43 2013] Assessing source extent using major
[Sat May 25 00:44:43 2013] Source does appear to be extended
[Sat May 25 00:44:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 00:45:13 2013] Using EEF radius (= 12.81 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:45:13 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 25 00:45:13 2013] Initial guess for spatial extent in simple fitting = 12.81"
[Sat May 25 00:45:13 2013] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.032
[Sat May 25 00:45:13 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 12.81"
[Sat May 25 00:45:17 2013] fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_src3.ximg exists
[Sat May 25 00:45:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_src3.csv
[Sat May 25 00:45:17 2013] fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat May 25 00:45:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_src3.csv
[Sat May 25 00:45:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:45:23 2013] fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat May 25 00:45:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat May 25 00:45:23 2013] fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat May 25 00:45:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat May 25 00:45:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:45:59 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.319197 pixels away
[Sat May 25 00:45:59 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:45:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:45:59 2013] Assessing source extent using major
[Sat May 25 00:45:59 2013] Source does appear to be extended
[Sat May 25 00:45:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 00:46:37 2013] XMMSAS src. selection expression = ellipse(11989.414780, 19536.765671, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 25 00:46:37 2013] Not overwriting source region fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src3_src.reg
[Sat May 25 00:46:37 2013] Extracting stamp from image fullrun_pn_xmm0603980101_pi300-10000_cl_sm2.00.img.gz, (101, 188) - (176, 263)
[Sat May 25 00:46:37 2013] XMMSAS bgd. selection expression = annulus(11989.414780, 19536.765671, 1087.500000, 2175.000000, X, Y)
[Sat May 25 00:46:37 2013] Writing fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src3.gif
[Sat May 25 00:46:42 2013] ../../xmm0603980101/products/events/fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0603980101/products/events/fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sat May 25 00:46:43 2013] Mean detx,y = (9326.47, -9790.22) 
[Sat May 25 00:46:43 2013] ../../xmm0603980101/products/images/fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src3_src.img and ../../xmm0603980101/products/images/fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Sat May 25 00:46:43 2013] ../../xmm0603980101/products/spectra/fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0603980101/products/spectra/fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sat May 25 00:46:43 2013] Setting source spectrum file to fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat May 25 00:46:43 2013] Setting bgd. spectrum file to fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat May 25 00:46:43 2013] ../../xmm0603980101/products/lightcurves/fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0603980101/products/lightcurves/fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sat May 25 02:27:23 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 25 02:27:23 2013] rmf not generated due to insufficient counts
[Sat May 25 03:51:50 2013] Updating aperture counts using extracted products
[Sat May 25 03:51:50 2013] Total counts from fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 1213.00
[Sat May 25 03:51:50 2013] Total counts from fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 4640.00
[Sat May 25 03:51:50 2013] Got source and background scale factors 1314180.000000, 10523890.000000
[Sat May 25 03:51:50 2013] User source parameters:
  Position = (138.4, 225.1) = 0 13 49.99 5 31 12.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 633.6 +/- 35.8
  Background aperture counts = 579.4
  Rate = 0.01 +/- 0.0007

[Sat May 25 03:51:50 2013] Updating counts from extracted products
[Sat May 25 03:51:50 2013] Set source signif. to 633.58/24.07 = 26.32
[Sat May 25 03:52:12 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 03:52:12 2013] Using photon index=1.80, rate=0.0119, arf fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src3.arf
[Sat May 25 03:52:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 03:52:12 2013] Updating source flux to 7.4e-14
[Sat May 25 03:53:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 25 03:53:30 2013] xmm0603980101/analysis//spectral/fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete