[Sat May 25 00:42:51 2013] Detection parameters:
  Position = (356.9, 428.9) = 0 12 46.29 5 45 59.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 220.6 +/- 22.7
  Background counts = 88.4
  Rate = 0.004 +/- 0.0004

[Sat May 25 00:42:56 2013] Off-axis axis estimate = 10.37'
[Sat May 25 00:43:46 2013] Using EEF radius (= 11.61 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:43:46 2013] Initial guess for spatial extent in simple fitting = 11.61"
[Sat May 25 00:43:46 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.896
[Sat May 25 00:43:46 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 11.61"
[Sat May 25 00:43:54 2013] fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_src14.ximg exists
[Sat May 25 00:43:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_src14.csv
[Sat May 25 00:43:55 2013] fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_src14_1.ximg exists
[Sat May 25 00:43:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_src14.csv
[Sat May 25 00:43:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:44:03 2013] fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sat May 25 00:44:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sat May 25 00:44:03 2013] fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sat May 25 00:44:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sat May 25 00:44:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:44:43 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 10.830018 pixels away
[Sat May 25 00:44:43 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:44:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:44:43 2013] Assessing source extent using major
[Sat May 25 00:44:43 2013] Source does appear to be extended
[Sat May 25 00:44:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 00:45:13 2013] Using EEF radius (= 11.61 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:45:13 2013] Initial guess for spatial extent in simple fitting = 11.61"
[Sat May 25 00:45:13 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.896
[Sat May 25 00:45:13 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 11.61"
[Sat May 25 00:45:18 2013] fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_src14.ximg exists
[Sat May 25 00:45:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_src14.csv
[Sat May 25 00:45:18 2013] fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_src14_1.ximg exists
[Sat May 25 00:45:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_src14.csv
[Sat May 25 00:45:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:45:25 2013] fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sat May 25 00:45:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sat May 25 00:45:25 2013] fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sat May 25 00:45:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sat May 25 00:45:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:45:59 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 14.486458 pixels away
[Sat May 25 00:45:59 2013] Source 16 is offset by 6.273252 and 4.621951 pixels which is larger than
2 X fitted extent = 1.334207 x 1.334207, not incorporating fit results
[Sat May 25 00:45:59 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:45:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:45:59 2013] Assessing source extent using major
[Sat May 25 00:45:59 2013] Source does appear to be extended
[Sat May 25 00:45:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 00:46:37 2013] XMMSAS src. selection expression = ellipse(31005.882904, 37269.999725, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 25 00:46:37 2013] Not overwriting source region fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src16_src.reg
[Sat May 25 00:46:37 2013] Extracting stamp from image fullrun_pn_xmm0603980101_pi300-10000_cl_sm2.00.img.gz, (319, 391) - (394, 466)
[Sat May 25 00:46:37 2013] XMMSAS bgd. selection expression = annulus(31005.882904, 37269.999725, 1087.500000, 2175.000000, X, Y) && !ellipse(29588.190186, 37790.218201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29249.361657, 36923.989417, 1535.136044, 367.399687, 111.507003, X, Y) && !ellipse(29006.205600, 36284.928000, 628.775218, 628.775218, 0.000000, X, Y) && !ellipse(28846.669708, 35887.302948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28293.990000, 34812.390000, 1683.496048, 1683.496048, 0.000000, X, Y) && !ellipse(28275.867800, 34594.996200, 1633.048047, 204.131206, 291.227300, X, Y) && !ellipse(27948.952000, 33937.854000, 1816.488052, 1816.488052, 0.000000, X, Y)
[Sat May 25 00:46:37 2013] Writing fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src16.gif
[Sat May 25 00:58:44 2013] Mean detx,y = (-1329.34, 13867.32) 
[Sat May 25 00:58:48 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 00:59:11 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 00:59:12 2013] Setting source spectrum file to fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat May 25 00:59:12 2013] Setting bgd. spectrum file to fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sat May 25 02:40:19 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 25 02:40:19 2013] rmf not generated due to insufficient counts
[Sat May 25 03:51:54 2013] Updating aperture counts using extracted products
[Sat May 25 03:51:55 2013] Total counts from fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 780.00
[Sat May 25 03:51:55 2013] Total counts from fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src16_bgd.pi.gz = 1667.00
[Sat May 25 03:51:55 2013] Got source and background scale factors 1220528.000000, 1550834.000000
[Sat May 25 03:51:55 2013] User source parameters:
  Position = (356.9, 428.9) = 0 12 46.29 5 45 59.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -532.0 +/- 28.9
  Background aperture counts = 1312.0
  Rate = -0.01 +/- 0.0005

[Sat May 25 03:51:55 2013] Updating counts from extracted products
[Sat May 25 03:51:55 2013] Set source signif. to -531.95/36.22 = -14.69
[Sat May 25 03:52:13 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 03:52:13 2013] Using photon index=1.80, rate=-0.01, arf fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src16.arf
[Sat May 25 03:52:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 03:52:13 2013] Updated flux is not positive, keeping original flux
[Sat May 25 03:53:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 25 03:53:30 2013] xmm0603980101/analysis//spectral/fullrun_pn_xmm0603980101_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete