[Sat May 25 00:43:03 2013] Detection parameters:
  Position = (279.1, 287.0) = 0 13 9.00 5 35 42.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 15480.3 +/- 148.0
  Background counts = 24.4
  Rate = 0.3 +/- 0.003

[Sat May 25 00:43:08 2013] Off-axis axis estimate = 1.63'
[Sat May 25 00:44:17 2013] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:44:17 2013] Initial guess for spatial extent in simple fitting = 7.24"
[Sat May 25 00:44:17 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Sat May 25 00:44:17 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Sat May 25 00:44:18 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_src1.ximg exists
[Sat May 25 00:44:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_src1.csv
[Sat May 25 00:44:18 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat May 25 00:44:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_src1.csv
[Sat May 25 00:44:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:44:22 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat May 25 00:44:22 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat May 25 00:44:22 2013] Fit fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat May 25 00:44:56 2013] Spatial fit model total counts = 14277.900000, observed total counts = 13825.000000
[Sat May 25 00:44:56 2013] Offset between fit and detection position for source 5 = 0.047076 pixels
[Sat May 25 00:44:56 2013] 14248.380000 total counts/ 3621.580000 bgd. counts: snr = 176.584860
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.047076 pixels
  Position = (279.0, 287.1) = 0 13 9.00 5 35 41.5
  Extent = 5.3 (5.2-5.3)", rotation angle = 0
  Source counts = 10626.8 +/- 119.4
  Background counts = 3621.6
  Rate = 0.2 +/- 0.002
[Sat May 25 00:44:56 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:44:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:44:56 2013] Assessing source extent using major axis lower bound
[Sat May 25 00:44:56 2013] Source does appear to be extended
[Sat May 25 00:44:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 00:45:36 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 25 00:45:36 2013] Initial guess for spatial extent in simple fitting = 5.28"
[Sat May 25 00:45:36 2013] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.363
[Sat May 25 00:45:36 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.28"
[Sat May 25 00:45:36 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_src1.ximg exists
[Sat May 25 00:45:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_src1.csv
[Sat May 25 00:45:37 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat May 25 00:45:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_src1.csv
[Sat May 25 00:45:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:45:39 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat May 25 00:45:39 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat May 25 00:45:39 2013] Fit fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat May 25 00:46:15 2013] Spatial fit model total counts = 14254.500000, observed total counts = 13825.000000
[Sat May 25 00:46:15 2013] Offset between fit and detection position for source 5 = 0.000719 pixels
[Sat May 25 00:46:15 2013] 14224.630000 total counts/ 3586.330000 bgd. counts: snr = 177.642595
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.000719 pixels
  Position = (279.0, 287.1) = 0 13 9.00 5 35 41.5
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source counts = 10638.3 +/- 119.3
  Background counts = 3586.3
  Rate = 0.2 +/- 0.002
[Sat May 25 00:46:15 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:46:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:46:15 2013] Assessing source extent using major axis lower bound
[Sat May 25 00:46:15 2013] Source does appear to be extended
[Sat May 25 00:46:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 03:49:45 2013] Counts = 10638.300000, rescaling region sizes by 3.000000
[Sat May 25 03:49:45 2013] XMMSAS src. selection expression = ellipse(24228.011880, 24927.869600, 952.036227, 952.036227, 0.000000, X, Y)
[Sat May 25 03:49:45 2013] Not overwriting source region fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src5_src.reg
[Sat May 25 03:49:45 2013] Extracting stamp from image fullrun_mos2_xmm0603980101_pi300-10000_cl_sm2.00.img.gz, (224, 232) - (334, 342)
[Sat May 25 03:49:45 2013] XMMSAS bgd. selection expression = annulus(24228.011880, 24927.869600, 4760.181137, 9520.362274, X, Y) && !ellipse(18433.149000, 22214.660400, 371.083211, 371.083211, 0.000000, X, Y) && !ellipse(25233.209351, 16186.296585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30626.731981, 27925.359619, 422.998716, 308.743960, 32.633227, X, Y) && !ellipse(30993.234344, 33207.287170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17095.905640, 16323.537704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28265.789124, 20310.374832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32695.524963, 20941.914703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20161.049400, 30292.753200, 465.300813, 304.654409, 146.906706, X, Y) && !ellipse(18760.394340, 28430.537800, 243.912807, 243.912807, 0.000000, X, Y) && !ellipse(19220.498581, 20401.159576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21201.312600, 23202.334400, 286.416808, 286.416808, 0.000000, X, Y) && !ellipse(20992.641693, 18160.001556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18895.670600, 30453.946200, 397.923211, 397.923211, 0.000000, X, Y) && !ellipse(22909.541600, 22531.363400, 478.688814, 478.688814, 0.000000, X, Y) && !ellipse(24024.690460, 26317.342773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20857.642200, 28229.268200, 397.318411, 397.318411, 0.000000, X, Y) && !ellipse(20186.598694, 16695.468811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23358.378998, 25546.728485, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 25 03:49:45 2013] Writing fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src5.gif
[Sat May 25 03:49:46 2013] ../../xmm0603980101/products/events/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0603980101/products/events/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create
[Sat May 25 03:49:47 2013] Mean detx,y = (37.36, -54.09) 
[Sat May 25 03:49:47 2013] ../../xmm0603980101/products/images/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src5_src.img and ../../xmm0603980101/products/images/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create
[Sat May 25 03:49:47 2013] ../../xmm0603980101/products/spectra/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src5_src_b10.pi.gz and ../../xmm0603980101/products/spectra/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create
[Sat May 25 03:49:47 2013] Setting source spectrum file to fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat May 25 03:49:47 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat May 25 03:49:47 2013] ../../xmm0603980101/products/lightcurves/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0603980101/products/lightcurves/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create
[Sat May 25 03:49:56 2013] fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src5.rmf exists, delete to re-create
[Sat May 25 03:49:56 2013] fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src5.arf exists, delete to re-create
[Sat May 25 03:52:27 2013] Updating aperture counts using extracted products
[Sat May 25 03:52:27 2013] Total counts from fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 14340.00
[Sat May 25 03:52:27 2013] Total counts from fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src5_bgd.pi.gz = 22374.00
[Sat May 25 03:52:27 2013] Got source and background scale factors 2612964.000000, 181701868.000000
[Sat May 25 03:52:27 2013] User source parameters:
  Position = (279.0, 287.1) = 0 13 9.00 5 35 41.5
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source aperture counts = 14018.3 +/- 120.8
  Background aperture counts = 321.7
  Rate = 0.3 +/- 0.002

[Sat May 25 03:52:36 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 03:52:36 2013] Using photon index=1.80, rate=0.192, arf fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src5.arf
[Sat May 25 03:52:36 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 03:52:37 2013] Updating source flux to 2.1e-12
[Sat May 25 03:53:04 2013] xmm0603980101/analysis//spectral/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete