[Sat May 25 00:43:07 2013] Detection parameters:
  Position = (263.0, 259.3) = 0 13 13.68 5 33 44.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.8 +/- 11.7
  Background counts = 24.5
  Rate = 0.002 +/- 0.0003

[Sat May 25 00:43:08 2013] Off-axis axis estimate = 3.83'
[Sat May 25 00:44:17 2013] Using EEF radius (= 8.34 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:44:17 2013] Initial guess for spatial extent in simple fitting = 8.34"
[Sat May 25 00:44:17 2013] source mask rpix=1.9, npix_max = 23, mask sum = 14, frac = 0.599
[Sat May 25 00:44:17 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 8.34"
[Sat May 25 00:44:20 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_src26.ximg exists
[Sat May 25 00:44:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_src26.csv
[Sat May 25 00:44:20 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_src26_1.ximg exists
[Sat May 25 00:44:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_src26.csv
[Sat May 25 00:44:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:44:24 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sat May 25 00:44:24 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sat May 25 00:44:24 2013] Fit fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Sat May 25 00:44:56 2013] Spatial fit model total counts = 323.415000, observed total counts = 296.000000
[Sat May 25 00:44:56 2013] Offset between fit and detection position for source 29 = 0.923668 pixels
[Sat May 25 00:44:56 2013] 325.583600 total counts/ 278.597000 bgd. counts: snr = 2.815048
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.923668 pixels
  Position = (263.9, 259.5) = 0 13 13.42 5 33 41.6
  Extent = 5.8 (3.2-9.0)", rotation angle = 0
  Source counts = 47.0 +/- 18.0
  Background counts = 278.6
  Rate = 0.0008 +/- 0.0003
[Sat May 25 00:44:56 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:44:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:44:56 2013] Assessing source extent using major axis lower bound
[Sat May 25 00:44:56 2013] Source does appear to be extended
[Sat May 25 00:44:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 00:45:36 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 25 00:45:36 2013] Initial guess for spatial extent in simple fitting = 5.82"
[Sat May 25 00:45:36 2013] source mask rpix=1.3, npix_max = 13, mask sum = 11, frac = 0.815
[Sat May 25 00:45:36 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 5.82"
[Sat May 25 00:45:39 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_src24.ximg exists
[Sat May 25 00:45:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_src24.csv
[Sat May 25 00:45:39 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_src24_1.ximg exists
[Sat May 25 00:45:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_src24.csv
[Sat May 25 00:45:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:45:43 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Sat May 25 00:45:43 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Sat May 25 00:45:43 2013] Fit fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Sat May 25 00:46:15 2013] Spatial fit model total counts = 323.674000, observed total counts = 296.000000
[Sat May 25 00:46:15 2013] Offset between fit and detection position for source 29 = 0.017214 pixels
[Sat May 25 00:46:15 2013] 325.784000 total counts/ 277.648000 bgd. counts: snr = 2.888835
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.017214 pixels
  Position = (263.9, 259.5) = 0 13 13.42 5 33 41.7
  Extent = 6.0 (3.2-9.0)", rotation angle = 0
  Source counts = 48.1 +/- 18.0
  Background counts = 277.6
  Rate = 0.0009 +/- 0.0003
[Sat May 25 00:46:15 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:46:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:46:15 2013] Assessing source extent using major axis lower bound
[Sat May 25 00:46:15 2013] Source does appear to be extended
[Sat May 25 00:46:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 03:49:46 2013] XMMSAS src. selection expression = ellipse(22909.541600, 22531.363400, 359.016610, 359.016610, 0.000000, X, Y)
[Sat May 25 03:49:46 2013] Not overwriting source region fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src29_src.reg
[Sat May 25 03:49:46 2013] Extracting stamp from image fullrun_mos2_xmm0603980101_pi300-10000_cl_sm2.00.img.gz, (243, 239) - (285, 280)
[Sat May 25 03:49:46 2013] XMMSAS bgd. selection expression = annulus(22909.541600, 22531.363400, 598.361017, 1196.722034, X, Y) && !ellipse(24228.011880, 24927.869600, 1269.381637, 1269.381637, 0.000000, X, Y)
[Sat May 25 03:49:46 2013] Writing fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src29.gif
[Sat May 25 03:49:47 2013] ../../xmm0603980101/products/events/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src29_src.evt and ../../xmm0603980101/products/events/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src29_bgd.evt exist, delete to re-create
[Sat May 25 03:49:47 2013] Mean detx,y = (-215.92, 2674.54) 
[Sat May 25 03:49:47 2013] ../../xmm0603980101/products/images/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src29_src.img and ../../xmm0603980101/products/images/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src29_bgd.img exist, delete to re-create
[Sat May 25 03:49:47 2013] ../../xmm0603980101/products/spectra/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src29_src_b10.pi.gz and ../../xmm0603980101/products/spectra/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src29_bgd.pi exist, delete to re-create
[Sat May 25 03:49:47 2013] Setting source spectrum file to fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat May 25 03:49:47 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sat May 25 03:49:47 2013] ../../xmm0603980101/products/lightcurves/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src29_src.lc and ../../xmm0603980101/products/lightcurves/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src29_bgd.lc exist, delete to re-create
[Sat May 25 03:49:56 2013] Not generating rmf since there are only 48 counts
[Sat May 25 03:49:56 2013] rmf not generated due to insufficient counts
[Sat May 25 03:49:56 2013] fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src29.arf exists, delete to re-create
[Sat May 25 03:52:32 2013] Updating aperture counts using extracted products
[Sat May 25 03:52:32 2013] Total counts from fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 101.00
[Sat May 25 03:52:33 2013] Total counts from fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src29_bgd.pi.gz = 450.00
[Sat May 25 03:52:33 2013] Got source and background scale factors 355580.000000, 3153952.000000
[Sat May 25 03:52:33 2013] User source parameters:
  Position = (263.9, 259.5) = 0 13 13.42 5 33 41.7
  Extent = 6.0 (3.2-9.0)", rotation angle = 0
  Source aperture counts = 50.3 +/- 11.1
  Background aperture counts = 50.7
  Rate = 0.0009 +/- 0.0002

[Sat May 25 03:52:38 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 03:52:38 2013] Using photon index=1.80, rate=0.000867, arf fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src29.arf
[Sat May 25 03:52:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 03:52:38 2013] Updating source flux to 1.1e-14
[Sat May 25 03:52:56 2013] Source 29 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May 25 03:53:04 2013] xmm0603980101/analysis//spectral/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete