[Sat May 25 00:43:06 2013] Detection parameters:
  Position = (269.0, 294.2) = 0 13 11.91 5 36 14.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.3 +/- 13.5
  Background counts = 24.3
  Rate = 0.001 +/- 0.0003

[Sat May 25 00:43:08 2013] Off-axis axis estimate = 2.15'
[Sat May 25 00:44:17 2013] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:44:17 2013] Initial guess for spatial extent in simple fitting = 7.51"
[Sat May 25 00:44:17 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.808
[Sat May 25 00:44:17 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 7.51"
[Sat May 25 00:44:21 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_src35.ximg exists
[Sat May 25 00:44:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_src35.csv
[Sat May 25 00:44:21 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_src35_1.ximg exists
[Sat May 25 00:44:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_src35.csv
[Sat May 25 00:44:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:44:25 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Sat May 25 00:44:25 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src35.csv
[Sat May 25 00:44:25 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Sat May 25 00:44:25 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src35.csv
[Sat May 25 00:44:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:44:56 2013] Spatial fit model total counts = -121.348000, observed total counts = 1001.000000
[Sat May 25 00:44:56 2013] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 25 00:44:56 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:44:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:44:56 2013] Assessing source extent using major
[Sat May 25 00:44:56 2013] Source does appear to be extended
[Sat May 25 00:44:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 00:45:36 2013] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:45:36 2013] Initial guess for spatial extent in simple fitting = 7.51"
[Sat May 25 00:45:36 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.808
[Sat May 25 00:45:36 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 7.51"
[Sat May 25 00:45:39 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_src32.ximg exists
[Sat May 25 00:45:39 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_src32_1.ximg exists
[Sat May 25 00:45:39 2013] Fit fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_src32 appears to have run properly
[Sat May 25 00:45:44 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Sat May 25 00:45:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src32.csv
[Sat May 25 00:45:44 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Sat May 25 00:45:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src32.csv
[Sat May 25 00:45:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:46:15 2013] Source 22 is offset by -6.856609 and 6.099224 pixels which is larger than
2 X fitted extent = 1.999729 x 6.901196, not incorporating fit results
[Sat May 25 00:46:15 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:46:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:46:15 2013] Assessing source extent using major
[Sat May 25 00:46:15 2013] Source does appear to be extended
[Sat May 25 00:46:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 03:49:46 2013] XMMSAS src. selection expression = ellipse(23358.378998, 25546.728485, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 25 03:49:46 2013] Not overwriting source region fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src22_src.reg
[Sat May 25 03:49:46 2013] Extracting stamp from image fullrun_mos2_xmm0603980101_pi300-10000_cl_sm2.00.img.gz, (232, 257) - (307, 332)
[Sat May 25 03:49:46 2013] XMMSAS bgd. selection expression = annulus(23358.378998, 25546.728485, 1087.500000, 2175.000000, X, Y) && !ellipse(24228.011880, 24927.869600, 1269.381637, 1269.381637, 0.000000, X, Y) && !ellipse(21201.312600, 23202.334400, 286.416808, 286.416808, 0.000000, X, Y) && !ellipse(24024.690460, 26317.342773, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 25 03:49:46 2013] Writing fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src22.gif
[Sat May 25 03:49:48 2013] ../../xmm0603980101/products/events/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src22_src.evt and ../../xmm0603980101/products/events/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src22_bgd.evt exist, delete to re-create
[Sat May 25 03:49:48 2013] Mean detx,y = (-884.64, -274.72) 
[Sat May 25 03:49:48 2013] ../../xmm0603980101/products/images/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src22_src.img and ../../xmm0603980101/products/images/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src22_bgd.img exist, delete to re-create
[Sat May 25 03:49:48 2013] ../../xmm0603980101/products/spectra/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src22_src_b10.pi.gz and ../../xmm0603980101/products/spectra/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src22_bgd.pi exist, delete to re-create
[Sat May 25 03:49:48 2013] Setting source spectrum file to fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sat May 25 03:49:48 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Sat May 25 03:49:48 2013] ../../xmm0603980101/products/lightcurves/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src22_src.lc and ../../xmm0603980101/products/lightcurves/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src22_bgd.lc exist, delete to re-create
[Sat May 25 03:49:56 2013] Not generating rmf since there are only 57 counts
[Sat May 25 03:49:56 2013] rmf not generated due to insufficient counts
[Sat May 25 03:49:56 2013] fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src22.arf exists, delete to re-create
[Sat May 25 03:52:36 2013] Updating aperture counts using extracted products
[Sat May 25 03:52:36 2013] Total counts from fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 555.00
[Sat May 25 03:52:36 2013] Total counts from fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src22_bgd.pi.gz = 1146.00
[Sat May 25 03:52:36 2013] Got source and background scale factors 1194632.000000, 6939200.000000
[Sat May 25 03:52:36 2013] User source parameters:
  Position = (269.0, 294.2) = 0 13 11.91 5 36 14.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 357.7 +/- 24.6
  Background aperture counts = 197.3
  Rate = 0.006 +/- 0.0004

[Sat May 25 03:52:36 2013] Updating counts from extracted products
[Sat May 25 03:52:36 2013] Set source signif. to 357.71/14.05 = 25.47
[Sat May 25 03:52:38 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 03:52:38 2013] Using photon index=1.80, rate=0.00644, arf fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src22.arf
[Sat May 25 03:52:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 03:52:38 2013] Updating source flux to 6.5e-14
[Sat May 25 03:52:56 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 25 03:53:04 2013] xmm0603980101/analysis//spectral/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete