[Sat May 25 00:43:05 2013] Detection parameters:
  Position = (240.3, 324.9) = 0 13 20.30 5 38 27.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.1 +/- 11.8
  Background counts = 24.3
  Rate = 0.001 +/- 0.0002

[Sat May 25 00:43:08 2013] Off-axis axis estimate = 4.63'
[Sat May 25 00:44:17 2013] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:44:17 2013] Initial guess for spatial extent in simple fitting = 8.75"
[Sat May 25 00:44:17 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.992
[Sat May 25 00:44:17 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 8.75"
[Sat May 25 00:44:21 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_src31.ximg exists
[Sat May 25 00:44:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_src31.csv
[Sat May 25 00:44:21 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_src31_1.ximg exists
[Sat May 25 00:44:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_src31.csv
[Sat May 25 00:44:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:44:25 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sat May 25 00:44:25 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sat May 25 00:44:25 2013] Fit fullrun_mos2_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Sat May 25 00:44:56 2013] Spatial fit model total counts = 279.192000, observed total counts = 279.000000
[Sat May 25 00:44:56 2013] Offset between fit and detection position for source 19 = 0.107162 pixels
[Sat May 25 00:44:56 2013] 282.058900 total counts/ 242.246000 bgd. counts: snr = 2.557970
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.107162 pixels
  Position = (240.3, 325.0) = 0 13 20.30 5 38 26.5
  Extent = 5.0 (3.5-7.4)", rotation angle = 0
  Source counts = 39.8 +/- 16.8
  Background counts = 242.2
  Rate = 0.0007 +/- 0.0003
[Sat May 25 00:44:56 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:44:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:44:56 2013] Assessing source extent using major axis lower bound
[Sat May 25 00:44:56 2013] Source does appear to be extended
[Sat May 25 00:44:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 00:45:36 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 25 00:45:36 2013] Initial guess for spatial extent in simple fitting = 5.01"
[Sat May 25 00:45:36 2013] source mask rpix=1.2, npix_max = 10, mask sum = 12, frac = 1.100
[Sat May 25 00:45:36 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 5.01"
[Sat May 25 00:45:39 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_src29.ximg exists
[Sat May 25 00:45:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_src29.csv
[Sat May 25 00:45:39 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_src29_1.ximg exists
[Sat May 25 00:45:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_src29.csv
[Sat May 25 00:45:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:45:43 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sat May 25 00:45:43 2013] fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sat May 25 00:45:43 2013] Fit fullrun_mos2_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Sat May 25 00:46:15 2013] Spatial fit model total counts = 281.750000, observed total counts = 282.000000
[Sat May 25 00:46:15 2013] Offset between fit and detection position for source 19 = 0.018442 pixels
[Sat May 25 00:46:15 2013] 283.748700 total counts/ 244.594000 bgd. counts: snr = 2.503577
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.018442 pixels
  Position = (240.3, 325.0) = 0 13 20.29 5 38 26.6
  Extent = 5.0 (3.5-7.4)", rotation angle = 0
  Source counts = 39.2 +/- 16.8
  Background counts = 244.6
  Rate = 0.0007 +/- 0.0003
[Sat May 25 00:46:15 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:46:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:46:15 2013] Assessing source extent using major axis lower bound
[Sat May 25 00:46:15 2013] Source does appear to be extended
[Sat May 25 00:46:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 03:49:46 2013] XMMSAS src. selection expression = ellipse(20857.642200, 28229.268200, 297.988809, 297.988809, 0.000000, X, Y)
[Sat May 25 03:49:46 2013] Not overwriting source region fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src19_src.reg
[Sat May 25 03:49:46 2013] Extracting stamp from image fullrun_mos2_xmm0603980101_pi300-10000_cl_sm2.00.img.gz, (223, 308) - (257, 342)
[Sat May 25 03:49:46 2013] XMMSAS bgd. selection expression = annulus(20857.642200, 28229.268200, 496.648014, 993.296029, X, Y)
[Sat May 25 03:49:46 2013] Writing fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src19.gif
[Sat May 25 03:49:47 2013] ../../xmm0603980101/products/events/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src19_src.evt and ../../xmm0603980101/products/events/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src19_bgd.evt exist, delete to re-create
[Sat May 25 03:49:47 2013] Mean detx,y = (-4356.81, -1736.99) 
[Sat May 25 03:49:47 2013] ../../xmm0603980101/products/images/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src19_src.img and ../../xmm0603980101/products/images/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src19_bgd.img exist, delete to re-create
[Sat May 25 03:49:47 2013] ../../xmm0603980101/products/spectra/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src19_src_b10.pi.gz and ../../xmm0603980101/products/spectra/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src19_bgd.pi exist, delete to re-create
[Sat May 25 03:49:47 2013] Setting source spectrum file to fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat May 25 03:49:47 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sat May 25 03:49:47 2013] ../../xmm0603980101/products/lightcurves/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src19_src.lc and ../../xmm0603980101/products/lightcurves/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src19_bgd.lc exist, delete to re-create
[Sat May 25 03:49:56 2013] Not generating rmf since there are only 39 counts
[Sat May 25 03:49:56 2013] rmf not generated due to insufficient counts
[Sat May 25 03:49:56 2013] fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src19.arf exists, delete to re-create
[Sat May 25 03:52:34 2013] Updating aperture counts using extracted products
[Sat May 25 03:52:35 2013] Total counts from fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 78.00
[Sat May 25 03:52:35 2013] Total counts from fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src19_bgd.pi.gz = 291.00
[Sat May 25 03:52:35 2013] Got source and background scale factors 278400.000000, 2324800.000000
[Sat May 25 03:52:35 2013] User source parameters:
  Position = (240.3, 325.0) = 0 13 20.29 5 38 26.6
  Extent = 5.0 (3.5-7.4)", rotation angle = 0
  Source aperture counts = 43.2 +/- 9.9
  Background aperture counts = 34.8
  Rate = 0.0008 +/- 0.0002

[Sat May 25 03:52:38 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 03:52:38 2013] Using photon index=1.80, rate=0.000705, arf fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src19.arf
[Sat May 25 03:52:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 03:52:38 2013] Updating source flux to 1e-14
[Sat May 25 03:52:56 2013] Source 19 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May 25 03:53:04 2013] xmm0603980101/analysis//spectral/fullrun_mos2_xmm0603980101_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete