[Sat May 25 00:43:01 2013] Detection parameters:
  Position = (127.7, 191.6) = 0 13 53.08 5 28 41.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.5 +/- 11.3
  Background counts = 28.0
  Rate = 0.0009 +/- 0.0002

[Sat May 25 00:43:02 2013] Off-axis axis estimate = 14.60'
[Sat May 25 00:44:09 2013] Using EEF radius (= 13.73 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:44:09 2013] Initial guess for spatial extent in simple fitting = 13.73"
[Sat May 25 00:44:09 2013] source mask rpix=3.2, npix_max = 53, mask sum = 34, frac = 0.636
[Sat May 25 00:44:09 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 13.73"
[Sat May 25 00:44:12 2013] fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_src32.ximg exists
[Sat May 25 00:44:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_src32.csv
[Sat May 25 00:44:12 2013] fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_src32_1.ximg exists
[Sat May 25 00:44:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_src32.csv
[Sat May 25 00:44:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:44:17 2013] fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Sat May 25 00:44:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src32.csv
[Sat May 25 00:44:17 2013] fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Sat May 25 00:44:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src32.csv
[Sat May 25 00:44:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:44:50 2013] Warning, spatial fit 32 centroid is now closest to src. 31
[Sat May 25 00:44:50 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:44:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:44:50 2013] Assessing source extent using major
[Sat May 25 00:44:50 2013] Source does appear to be extended
[Sat May 25 00:44:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 00:45:30 2013] Using EEF radius (= 13.73 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:45:30 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 25 00:45:30 2013] Initial guess for spatial extent in simple fitting = 13.73"
[Sat May 25 00:45:30 2013] source mask rpix=3.2, npix_max = 53, mask sum = 34, frac = 0.636
[Sat May 25 00:45:30 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 13.73"
[Sat May 25 00:45:32 2013] fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_src31.ximg exists
[Sat May 25 00:45:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_src31.csv
[Sat May 25 00:45:32 2013] fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_src31_1.ximg exists
[Sat May 25 00:45:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_src31.csv
[Sat May 25 00:45:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:45:35 2013] fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Sat May 25 00:45:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src31.csv
[Sat May 25 00:45:35 2013] fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Sat May 25 00:45:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src31.csv
[Sat May 25 00:45:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:46:08 2013] Source 30 is offset by -0.411880 and -7.281906 pixels which is larger than
2 X fitted extent = 1.544579 x 1.544579, not incorporating fit results
[Sat May 25 00:46:08 2013] Source 30 is offset by -6.318961 and -7.475699 pixels which is larger than
2 X fitted extent = 0.818805 x 0.818805, not incorporating fit results
[Sat May 25 00:46:08 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:46:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:46:08 2013] Assessing source extent using major
[Sat May 25 00:46:08 2013] Source does appear to be extended
[Sat May 25 00:46:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 03:49:36 2013] XMMSAS src. selection expression = ellipse(11064.138397, 16618.502167, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 25 03:49:36 2013] Not overwriting source region fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src30_src.reg
[Sat May 25 03:49:36 2013] Extracting stamp from image fullrun_mos1_xmm0603980101_pi300-10000_cl_sm2.00.img.gz, (90, 154) - (165, 229)
[Sat May 25 03:49:36 2013] XMMSAS bgd. selection expression = annulus(11064.138397, 16618.502167, 1087.500000, 2175.000000, X, Y) && !ellipse(11972.923065, 19536.096603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12215.197144, 16153.845490, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 25 03:49:36 2013] Writing fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src30.gif
[Sat May 25 03:49:37 2013] ../../xmm0603980101/products/events/fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src30_src.evt and ../../xmm0603980101/products/events/fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src30_bgd.evt exist, delete to re-create
[Sat May 25 03:49:37 2013] Mean detx,y = (12817.36, 8649.98) 
[Sat May 25 03:49:37 2013] ../../xmm0603980101/products/images/fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src30_src.img and ../../xmm0603980101/products/images/fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src30_bgd.img exist, delete to re-create
[Sat May 25 03:49:37 2013] ../../xmm0603980101/products/spectra/fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src30_src_b10.pi.gz and ../../xmm0603980101/products/spectra/fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src30_bgd.pi exist, delete to re-create
[Sat May 25 03:49:37 2013] Setting source spectrum file to fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sat May 25 03:49:37 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sat May 25 03:49:37 2013] ../../xmm0603980101/products/lightcurves/fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src30_src.lc and ../../xmm0603980101/products/lightcurves/fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src30_bgd.lc exist, delete to re-create
[Sat May 25 03:49:45 2013] Not generating rmf since there are only 52 counts
[Sat May 25 03:49:45 2013] rmf not generated due to insufficient counts
[Sat May 25 03:49:45 2013] fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src30.arf exists, delete to re-create
[Sat May 25 03:52:24 2013] Updating aperture counts using extracted products
[Sat May 25 03:52:24 2013] Total counts from fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src30_src_b10.pi.gz = 256.00
[Sat May 25 03:52:24 2013] Total counts from fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src30_bgd.pi.gz = 1025.00
[Sat May 25 03:52:24 2013] Got source and background scale factors 911542.000000, 4898981.000000
[Sat May 25 03:52:24 2013] User source parameters:
  Position = (127.7, 191.6) = 0 13 53.08 5 28 41.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 65.3 +/- 17.0
  Background aperture counts = 190.7
  Rate = 0.001 +/- 0.0003

[Sat May 25 03:52:24 2013] Updating counts from extracted products
[Sat May 25 03:52:24 2013] Set source signif. to 65.28/13.81 = 4.73
[Sat May 25 03:52:27 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 03:52:27 2013] Using photon index=1.80, rate=0.00118, arf fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src30.arf
[Sat May 25 03:52:27 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 03:52:27 2013] Updating source flux to 3.4e-14
[Sat May 25 03:52:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 25 03:52:56 2013] xmm0603980101/analysis//spectral/fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete