[Sat May 25 00:43:01 2013] Detection parameters:
  Position = (432.5, 204.7) = 0 12 24.29 5 29 41.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.0 +/- 10.9
  Background counts = 23.5
  Rate = 0.0009 +/- 0.0002

[Sat May 25 00:43:02 2013] Off-axis axis estimate = 11.86'
[Sat May 25 00:44:09 2013] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:44:09 2013] Initial guess for spatial extent in simple fitting = 12.36"
[Sat May 25 00:44:09 2013] source mask rpix=2.8, npix_max = 44, mask sum = 43, frac = 0.963
[Sat May 25 00:44:09 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 12.36"
[Sat May 25 00:44:13 2013] fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_src35.ximg exists
[Sat May 25 00:44:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_src35.csv
[Sat May 25 00:44:13 2013] fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_src35_1.ximg exists
[Sat May 25 00:44:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_src35.csv
[Sat May 25 00:44:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:44:17 2013] fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Sat May 25 00:44:17 2013] fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Sat May 25 00:44:17 2013] Fit fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Sat May 25 00:44:50 2013] Spatial fit model total counts = 348.773000, observed total counts = 332.000000
[Sat May 25 00:44:50 2013] Offset between fit and detection position for source 28 = 0.086289 pixels
[Sat May 25 00:44:50 2013] 351.494400 total counts/ 329.853000 bgd. counts: snr = 1.191585
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.086289 pixels
  Position = (432.5, 204.7) = 0 12 24.30 5 29 43.2
  Extent = 3.5 (3.1-7.1)", rotation angle = 0
  Source counts = 21.6 +/- 18.7
  Background counts = 329.9
  Rate = 0.0004 +/- 0.0003
  Deleting source due to low Poisson probability