[Sat May 25 00:43:01 2013] Detection parameters:
  Position = (221.5, 235.1) = 0 13 25.76 5 31 54.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.3 +/- 12.5
  Background counts = 27.2
  Rate = 0.002 +/- 0.0003

[Sat May 25 00:43:02 2013] Off-axis axis estimate = 7.22'
[Sat May 25 00:44:09 2013] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:44:09 2013] Initial guess for spatial extent in simple fitting = 10.04"
[Sat May 25 00:44:09 2013] source mask rpix=2.3, npix_max = 31, mask sum = 21, frac = 0.666
[Sat May 25 00:44:09 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 10.04"
[Sat May 25 00:44:11 2013] fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_src16.ximg exists
[Sat May 25 00:44:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_src16.csv
[Sat May 25 00:44:11 2013] fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_src16_1.ximg exists
[Sat May 25 00:44:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_src16.csv
[Sat May 25 00:44:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:44:16 2013] fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sat May 25 00:44:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sat May 25 00:44:16 2013] fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sat May 25 00:44:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sat May 25 00:44:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:44:50 2013] Spatial fit model total counts = 306.385000, observed total counts = 265.000000
[Sat May 25 00:44:50 2013] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 25 00:44:50 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:44:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:44:50 2013] Assessing source extent using major
[Sat May 25 00:44:50 2013] Source does appear to be extended
[Sat May 25 00:44:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 00:45:30 2013] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:45:30 2013] Initial guess for spatial extent in simple fitting = 10.04"
[Sat May 25 00:45:30 2013] source mask rpix=2.3, npix_max = 31, mask sum = 21, frac = 0.666
[Sat May 25 00:45:30 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 10.04"
[Sat May 25 00:45:31 2013] fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_src16.ximg exists
[Sat May 25 00:45:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_src16.csv
[Sat May 25 00:45:31 2013] fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_src16_1.ximg exists
[Sat May 25 00:45:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_src16.csv
[Sat May 25 00:45:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:45:34 2013] fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sat May 25 00:45:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Sat May 25 00:45:34 2013] fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sat May 25 00:45:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Sat May 25 00:45:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:46:08 2013] Spatial fit model total counts = 305.956000, observed total counts = 265.000000
[Sat May 25 00:46:08 2013] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 25 00:46:08 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:46:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:46:08 2013] Assessing source extent using major
[Sat May 25 00:46:08 2013] Source does appear to be extended
[Sat May 25 00:46:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 03:49:35 2013] XMMSAS src. selection expression = ellipse(19224.790436, 20402.314514, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 25 03:49:35 2013] Not overwriting source region fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src27_src.reg
[Sat May 25 03:49:35 2013] Extracting stamp from image fullrun_mos1_xmm0603980101_pi300-10000_cl_sm2.00.img.gz, (184, 198) - (259, 273)
[Sat May 25 03:49:35 2013] XMMSAS bgd. selection expression = annulus(19224.790436, 20402.314514, 1087.500000, 2175.000000, X, Y) && !ellipse(18414.414429, 22213.769318, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 25 03:49:35 2013] Writing fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src27.gif
[Sat May 25 03:49:37 2013] ../../xmm0603980101/products/events/fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src27_src.evt and ../../xmm0603980101/products/events/fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src27_bgd.evt exist, delete to re-create
[Sat May 25 03:49:37 2013] Mean detx,y = (6231.19, 2617.20) 
[Sat May 25 03:49:37 2013] ../../xmm0603980101/products/images/fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src27_src.img and ../../xmm0603980101/products/images/fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src27_bgd.img exist, delete to re-create
[Sat May 25 03:49:37 2013] ../../xmm0603980101/products/spectra/fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src27_src_b10.pi.gz and ../../xmm0603980101/products/spectra/fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src27_bgd.pi exist, delete to re-create
[Sat May 25 03:49:37 2013] Setting source spectrum file to fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sat May 25 03:49:37 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sat May 25 03:49:37 2013] ../../xmm0603980101/products/lightcurves/fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src27_src.lc and ../../xmm0603980101/products/lightcurves/fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src27_bgd.lc exist, delete to re-create
[Sat May 25 03:49:45 2013] Not generating rmf since there are only 80 counts
[Sat May 25 03:49:45 2013] rmf not generated due to insufficient counts
[Sat May 25 03:49:45 2013] fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src27.arf exists, delete to re-create
[Sat May 25 03:52:20 2013] Updating aperture counts using extracted products
[Sat May 25 03:52:20 2013] Total counts from fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 212.00
[Sat May 25 03:52:20 2013] Total counts from fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src27_bgd.pi.gz = 1181.00
[Sat May 25 03:52:20 2013] Got source and background scale factors 1158056.000000, 8817160.000000
[Sat May 25 03:52:20 2013] User source parameters:
  Position = (221.5, 235.1) = 0 13 25.76 5 31 54.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 56.9 +/- 15.6
  Background aperture counts = 155.1
  Rate = 0.001 +/- 0.0003

[Sat May 25 03:52:20 2013] Updating counts from extracted products
[Sat May 25 03:52:20 2013] Set source signif. to 56.89/12.45 = 4.57
[Sat May 25 03:52:26 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 03:52:26 2013] Using photon index=1.80, rate=0.00103, arf fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src27.arf
[Sat May 25 03:52:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 03:52:26 2013] Updating source flux to 1.5e-14
[Sat May 25 03:52:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 25 03:52:56 2013] xmm0603980101/analysis//spectral/fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete