[Sat May 25 00:43:00 2013] Detection parameters:
  Position = (216.5, 326.8) = 0 13 27.23 5 38 35.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.3 +/- 13.4
  Background counts = 26.2
  Rate = 0.002 +/- 0.0003

[Sat May 25 00:43:02 2013] Off-axis axis estimate = 6.29'
[Sat May 25 00:44:09 2013] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:44:09 2013] Initial guess for spatial extent in simple fitting = 9.57"
[Sat May 25 00:44:09 2013] source mask rpix=2.2, npix_max = 29, mask sum = 24, frac = 0.823
[Sat May 25 00:44:09 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 9.57"
[Sat May 25 00:44:11 2013] fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_src13.ximg exists
[Sat May 25 00:44:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_src13.csv
[Sat May 25 00:44:11 2013] fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_src13_1.ximg exists
[Sat May 25 00:44:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_src13.csv
[Sat May 25 00:44:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:44:16 2013] fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sat May 25 00:44:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sat May 25 00:44:16 2013] fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sat May 25 00:44:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sat May 25 00:44:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603980101_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:44:50 2013] Spatial fit model total counts = 347.068000, observed total counts = 305.000000
[Sat May 25 00:44:50 2013] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 25 00:44:50 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:44:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:44:50 2013] Assessing source extent using major
[Sat May 25 00:44:50 2013] Source does appear to be extended
[Sat May 25 00:44:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 00:45:30 2013] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting
[Sat May 25 00:45:30 2013] Initial guess for spatial extent in simple fitting = 9.57"
[Sat May 25 00:45:30 2013] source mask rpix=2.2, npix_max = 29, mask sum = 24, frac = 0.823
[Sat May 25 00:45:30 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 9.57"
[Sat May 25 00:45:31 2013] fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_src13.ximg exists
[Sat May 25 00:45:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_src13.csv
[Sat May 25 00:45:31 2013] fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_src13_1.ximg exists
[Sat May 25 00:45:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_src13.csv
[Sat May 25 00:45:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:45:34 2013] fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sat May 25 00:45:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sat May 25 00:45:34 2013] fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sat May 25 00:45:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sat May 25 00:45:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603980101_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 00:46:08 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 15.125669 pixels away
[Sat May 25 00:46:08 2013] Vigneting correction estimate = 1.000000
[Sat May 25 00:46:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 00:46:08 2013] Assessing source extent using major
[Sat May 25 00:46:08 2013] Source does appear to be extended
[Sat May 25 00:46:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 03:49:35 2013] XMMSAS src. selection expression = ellipse(18785.534424, 28384.766296, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 25 03:49:35 2013] Not overwriting source region fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src21_src.reg
[Sat May 25 03:49:35 2013] Extracting stamp from image fullrun_mos1_xmm0603980101_pi300-10000_cl_sm2.00.img.gz, (179, 289) - (254, 364)
[Sat May 25 03:49:35 2013] XMMSAS bgd. selection expression = annulus(18785.534424, 28384.766296, 1087.500000, 2175.000000, X, Y) && !ellipse(20173.999400, 30276.844000, 404.852812, 404.852812, 0.000000, X, Y) && !ellipse(20798.373200, 28246.880800, 338.275210, 338.275210, 0.000000, X, Y) && !ellipse(18858.620743, 30443.420258, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 25 03:49:35 2013] Writing fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src21.gif
[Sat May 25 03:49:36 2013] ../../xmm0603980101/products/events/fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src21_src.evt and ../../xmm0603980101/products/events/fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src21_bgd.evt exist, delete to re-create
[Sat May 25 03:49:36 2013] Mean detx,y = (-862.85, 6101.68) 
[Sat May 25 03:49:36 2013] ../../xmm0603980101/products/images/fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src21_src.img and ../../xmm0603980101/products/images/fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src21_bgd.img exist, delete to re-create
[Sat May 25 03:49:36 2013] ../../xmm0603980101/products/spectra/fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src21_src_b10.pi.gz and ../../xmm0603980101/products/spectra/fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src21_bgd.pi exist, delete to re-create
[Sat May 25 03:49:36 2013] Setting source spectrum file to fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sat May 25 03:49:36 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sat May 25 03:49:36 2013] ../../xmm0603980101/products/lightcurves/fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src21_src.lc and ../../xmm0603980101/products/lightcurves/fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src21_bgd.lc exist, delete to re-create
[Sat May 25 03:49:45 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 25 03:49:45 2013] rmf not generated due to insufficient counts
[Sat May 25 03:49:45 2013] fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src21.arf exists, delete to re-create
[Sat May 25 03:52:18 2013] Updating aperture counts using extracted products
[Sat May 25 03:52:18 2013] Total counts from fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 228.00
[Sat May 25 03:52:18 2013] Total counts from fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src21_bgd.pi.gz = 1273.00
[Sat May 25 03:52:18 2013] Got source and background scale factors 1072706.000000, 8488078.000000
[Sat May 25 03:52:18 2013] User source parameters:
  Position = (216.5, 326.8) = 0 13 27.23 5 38 35.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 67.1 +/- 16.1
  Background aperture counts = 160.9
  Rate = 0.001 +/- 0.0003

[Sat May 25 03:52:18 2013] Updating counts from extracted products
[Sat May 25 03:52:18 2013] Set source signif. to 67.12/12.68 = 5.29
[Sat May 25 03:52:26 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 03:52:26 2013] Using photon index=1.80, rate=0.00121, arf fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src21.arf
[Sat May 25 03:52:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 03:52:26 2013] Updating source flux to 2.1e-14
[Sat May 25 03:52:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 25 03:52:56 2013] xmm0603980101/analysis//spectral/fullrun_mos1_xmm0603980101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete