[Tue May 21 11:51:05 2013] Detection parameters:
  Position = (307.3, 304.0) = 4 54 13.88 -10 14 59.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.4 +/- 17.1
  Background counts = 77.4
  Rate = 0.007 +/- 0.001

[Tue May 21 11:51:07 2013] Off-axis axis estimate = 0.76'
[Tue May 21 11:55:29 2013] Using EEF radius (= 6.81 ")to estimate initial spatial extent for simple fitting
[Tue May 21 11:55:29 2013] Initial guess for spatial extent in simple fitting = 6.81"
[Tue May 21 11:55:29 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.938
[Tue May 21 11:55:29 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 6.81"
[Tue May 21 13:46:24 2013] fullrun_pn_xmm0603890101_pi300-10000_cl_pass0_src26.ximg exists
[Tue May 21 13:46:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603890101_pi300-10000_cl_pass0_src26.csv
[Tue May 21 13:46:24 2013] fullrun_pn_xmm0603890101_pi300-10000_cl_pass0_src26_1.ximg exists
[Tue May 21 13:46:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603890101_pi300-10000_cl_pass0_src26.csv
[Tue May 21 13:46:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603890101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603890101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 13:46:24 2013] fullrun_pn_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Tue May 21 13:46:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Tue May 21 13:46:24 2013] fullrun_pn_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Tue May 21 13:46:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Tue May 21 13:46:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 21:13:22 2013] Source 31 is offset by 1.958036 and 2.085156 pixels which is larger than
2 X fitted extent = 0.782680 x 6.261471, not incorporating fit results
[Tue May 21 21:13:22 2013] Source 31 is offset by -5.574660 and 1.136490 pixels which is larger than
2 X fitted extent = 0.821223 x 0.821223, not incorporating fit results
[Tue May 21 21:13:22 2013] Vigneting correction estimate = 1.000000
[Tue May 21 21:13:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 21:13:22 2013] Assessing source extent using major
[Tue May 21 21:13:22 2013] Source does appear to be extended
[Tue May 21 21:13:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 21:13:22 2013] Source is confused with source 25
[Tue May 21 21:14:11 2013] Using EEF radius (= 6.81 ")to estimate initial spatial extent for simple fitting
[Tue May 21 21:14:11 2013] Initial guess for spatial extent in simple fitting = 6.81"
[Tue May 21 21:14:11 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.938
[Tue May 21 21:14:11 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 6.81"
[Tue May 21 22:56:22 2013] fullrun_pn_xmm0603890101_pi300-10000_cl_pass1_src22.ximg exists
[Tue May 21 22:56:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603890101_pi300-10000_cl_pass1_src22.csv
[Tue May 21 22:56:22 2013] fullrun_pn_xmm0603890101_pi300-10000_cl_pass1_src22_1.ximg exists
[Tue May 21 22:56:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603890101_pi300-10000_cl_pass1_src22.csv
[Tue May 21 22:56:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603890101_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603890101_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 22:56:22 2013] fullrun_pn_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Tue May 21 22:56:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src22.csv
[Tue May 21 22:56:22 2013] fullrun_pn_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Tue May 21 22:56:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src22.csv
[Tue May 21 22:56:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 06:00:25 2013] Spatial fit model total counts = 1300.780000, observed total counts = 1053.000000
[Wed May 22 06:00:25 2013] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 22 06:00:25 2013] Vigneting correction estimate = 1.000000
[Wed May 22 06:00:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 06:00:25 2013] Assessing source extent using major
[Wed May 22 06:00:25 2013] Source does appear to be extended
[Wed May 22 06:00:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 06:01:23 2013] XMMSAS src. selection expression = ellipse(26690.796539, 26399.210602, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 06:01:23 2013] Writing source region out to fullrun_pn_xmm0603890101_pi300-10000_pass1_cl_src31_src.reg
[Wed May 22 06:01:23 2013] Extracting stamp from image fullrun_pn_xmm0603890101_pi300-10000_cl_sm2.00.img.gz, (270, 266) - (345, 341)
[Wed May 22 06:01:23 2013] XMMSAS bgd. selection expression = annulus(26690.796539, 26399.210602, 1087.500000, 2175.000000, X, Y) && !ellipse(29031.802246, 29182.153900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27637.072876, 28863.364532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28915.711090, 28569.840424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25330.673400, 27873.955800, 682.092020, 205.215206, 43.793566, X, Y) && !ellipse(28468.128906, 27436.352661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27065.211426, 27539.816498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27915.691650, 27426.385681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27050.284851, 26940.979950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28240.813263, 27001.788086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29717.912262, 26476.169281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29111.060181, 26305.692505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27901.118195, 26482.469666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27624.265015, 25970.842865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29013.660431, 25862.552185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28047.549820, 25984.253800, 1418.024041, 245.764007, 75.499100, X, Y) && !ellipse(28142.558594, 25543.460144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28807.781494, 25140.370941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27796.297638, 25104.472290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27925.679871, 24694.963226, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 06:01:23 2013] Writing fullrun_pn_xmm0603890101_pi300-10000_pass1_cl_src31.gif
[Wed May 22 06:22:00 2013] Mean detx,y = (-1624.03, 2175.41) 
[Wed May 22 06:22:04 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 06:22:25 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 06:22:26 2013] Setting source spectrum file to fullrun_pn_xmm0603890101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Wed May 22 06:22:26 2013] Setting bgd. spectrum file to fullrun_pn_xmm0603890101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Wed May 22 06:51:24 2013] Not generating rmf since there are only 84 counts
[Wed May 22 06:51:24 2013] rmf not generated due to insufficient counts
[Wed May 22 10:26:33 2013] Updating aperture counts using extracted products
[Wed May 22 10:26:33 2013] Total counts from fullrun_pn_xmm0603890101_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 758.00
[Wed May 22 10:26:33 2013] Total counts from fullrun_pn_xmm0603890101_pi300-10000_pass1_cl_src31_bgd.pi.gz = 2005.00
[Wed May 22 10:26:33 2013] Got source and background scale factors 1149766.000000, 4961770.000000
[Wed May 22 10:26:33 2013] User source parameters:
  Position = (307.3, 304.0) = 4 54 13.88 -10 14 59.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 293.4 +/- 28.5
  Background aperture counts = 464.6
  Rate = 0.02 +/- 0.002

[Wed May 22 10:26:33 2013] Updating counts from extracted products
[Wed May 22 10:26:33 2013] Set source signif. to 293.39/21.55 = 13.61
[Wed May 22 10:26:42 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 10:26:42 2013] Using photon index=1.80, rate=0.0197, arf fullrun_pn_xmm0603890101_pi300-10000_pass1_cl_src31.arf
[Wed May 22 10:26:42 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 10:26:42 2013] Updating source flux to 6.6e-14
[Wed May 22 10:27:45 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 10:27:49 2013] xmm0603890101/analysis//spectral/fullrun_pn_xmm0603890101_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete