[Tue May 21 11:52:49 2013] Detection parameters:
  Position = (345.4, 340.0) = 4 54 2.67 -10 12 21.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.7 +/- 20.1
  Background counts = 113.3
  Rate = 0.002 +/- 0.0003

[Tue May 21 11:52:51 2013] Off-axis axis estimate = 4.55'
[Tue May 21 16:16:30 2013] Using EEF radius (= 8.70 ")to estimate initial spatial extent for simple fitting
[Tue May 21 16:16:30 2013] Initial guess for spatial extent in simple fitting = 8.70"
[Tue May 21 16:16:30 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.999
[Tue May 21 16:16:30 2013] Giving source the simple spatial ID 43 for pass 0, mean size = 8.70"
[Tue May 21 21:13:07 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src43.ximg exists
[Tue May 21 21:13:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src43.csv
[Tue May 21 21:13:07 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src43_1.ximg exists
[Tue May 21 21:13:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src43.csv
[Tue May 21 21:13:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 21:13:10 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Tue May 21 21:13:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src43.csv
[Tue May 21 21:13:10 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Tue May 21 21:13:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src43.csv
[Tue May 21 21:13:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 21:13:54 2013] Source 29 is offset by 8.407101 and 4.853743 pixels which is larger than
2 X fitted extent = 7.943265 x 7.943265, not incorporating fit results
[Tue May 21 21:13:54 2013] Vigneting correction estimate = 1.000000
[Tue May 21 21:13:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 21:13:54 2013] Assessing source extent using major
[Tue May 21 21:13:54 2013] Source does appear to be extended
[Tue May 21 21:13:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 01:19:49 2013] Using EEF radius (= 8.70 ")to estimate initial spatial extent for simple fitting
[Wed May 22 01:19:49 2013] Initial guess for spatial extent in simple fitting = 8.70"
[Wed May 22 01:19:49 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.999
[Wed May 22 01:19:49 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 8.70"
[Wed May 22 06:00:07 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src35.ximg exists
[Wed May 22 06:00:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src35.csv
[Wed May 22 06:00:07 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src35_1.ximg exists
[Wed May 22 06:00:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src35.csv
[Wed May 22 06:00:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 06:00:09 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Wed May 22 06:00:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src35.csv
[Wed May 22 06:00:09 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Wed May 22 06:00:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src35.csv
[Wed May 22 06:00:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 06:01:00 2013] Warning, spatial fit 35 centroid is now closest to src. 6
[Wed May 22 06:01:00 2013] Vigneting correction estimate = 1.000000
[Wed May 22 06:01:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 06:01:00 2013] Assessing source extent using major
[Wed May 22 06:01:00 2013] Source does appear to be extended
[Wed May 22 06:01:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 08:38:05 2013] XMMSAS src. selection expression = ellipse(30001.689758, 29534.319641, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 08:38:05 2013] Writing source region out to fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src29_src.reg
[Wed May 22 08:38:05 2013] Extracting stamp from image fullrun_mos2_xmm0603890101_pi300-10000_cl_sm2.00.img.gz, (308, 303) - (383, 378)
[Wed May 22 08:38:05 2013] XMMSAS bgd. selection expression = annulus(30001.689758, 29534.319641, 1087.500000, 2175.000000, X, Y) && !ellipse(28901.066000, 28414.808000, 1243.368036, 846.680024, 343.694100, X, Y) && !ellipse(28956.744600, 28991.954000, 1333.328038, 894.600026, 106.199900, X, Y) && !ellipse(28551.520400, 26493.869000, 1198.792034, 1198.792034, 0.000000, X, Y) && !ellipse(27963.296000, 27548.850820, 786.571223, 395.703211, 324.895000, X, Y) && !ellipse(28661.685852, 27700.488251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27972.395111, 28752.094910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28071.725067, 28140.089417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29259.091300, 31754.138800, 336.048010, 233.917607, 0.345918, X, Y) && !ellipse(30117.502000, 27219.764000, 1293.496037, 1293.496037, 0.000000, X, Y) && !ellipse(29507.556946, 27615.264465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31976.227081, 29916.925293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27135.187378, 29098.175323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30900.648200, 26562.477600, 1360.304039, 373.729611, 92.537340, X, Y) && !ellipse(30096.588470, 26573.300873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28691.682373, 32543.176727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31270.402000, 27365.782000, 2586.992074, 2586.992074, 0.000000, X, Y) && !ellipse(27045.564209, 28747.666321, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 08:38:05 2013] Writing fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src29.gif
[Wed May 22 08:59:31 2013] Mean detx,y = (4011.81, -6101.78) 
[Wed May 22 08:59:33 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 08:59:50 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 08:59:50 2013] Setting source spectrum file to fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Wed May 22 08:59:50 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Wed May 22 10:01:07 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 22 10:01:07 2013] rmf not generated due to insufficient counts
[Wed May 22 10:27:03 2013] Updating aperture counts using extracted products
[Wed May 22 10:27:03 2013] Total counts from fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 1096.00
[Wed May 22 10:27:04 2013] Total counts from fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src29_bgd.pi.gz = 1448.00
[Wed May 22 10:27:04 2013] Got source and background scale factors 1111078.000000, 3488943.000000
[Wed May 22 10:27:04 2013] User source parameters:
  Position = (345.4, 340.0) = 4 54 2.67 -10 12 21.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 634.9 +/- 34.1
  Background aperture counts = 461.1
  Rate = 0.008 +/- 0.0004

[Wed May 22 10:27:04 2013] Updating counts from extracted products
[Wed May 22 10:27:04 2013] Set source signif. to 634.87/21.47 = 29.57
[Wed May 22 10:27:15 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 10:27:15 2013] Using photon index=1.80, rate=0.00782, arf fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src29.arf
[Wed May 22 10:27:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 10:27:15 2013] Updating source flux to 1.1e-13
[Wed May 22 10:27:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 10:27:45 2013] xmm0603890101/analysis//spectral/fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete