[Tue May 21 11:52:49 2013] Detection parameters:
  Position = (368.1, 344.4) = 4 53 55.98 -10 12 4.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 120.6 +/- 15.8
  Background counts = 66.7
  Rate = 0.003 +/- 0.0003

[Tue May 21 11:52:51 2013] Off-axis axis estimate = 6.05'
[Tue May 21 16:16:30 2013] Using EEF radius (= 9.45 ")to estimate initial spatial extent for simple fitting
[Tue May 21 16:16:30 2013] Initial guess for spatial extent in simple fitting = 9.45"
[Tue May 21 16:16:30 2013] source mask rpix=2.2, npix_max = 28, mask sum = 26, frac = 0.909
[Tue May 21 16:16:30 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 9.45"
[Tue May 21 21:13:07 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src38.ximg exists
[Tue May 21 21:13:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src38.csv
[Tue May 21 21:13:07 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src38_1.ximg exists
[Tue May 21 21:13:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src38.csv
[Tue May 21 21:13:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 21:13:09 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Tue May 21 21:13:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src38.csv
[Tue May 21 21:13:09 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Tue May 21 21:13:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src38.csv
[Tue May 21 21:13:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 21:13:54 2013] Spatial fit model total counts = 722.853000, observed total counts = 518.000000
[Tue May 21 21:13:54 2013] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 21 21:13:54 2013] Vigneting correction estimate = 1.000000
[Tue May 21 21:13:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 21:13:54 2013] Assessing source extent using major
[Tue May 21 21:13:54 2013] Source does appear to be extended
[Tue May 21 21:13:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 01:19:49 2013] Using EEF radius (= 9.45 ")to estimate initial spatial extent for simple fitting
[Wed May 22 01:19:49 2013] Initial guess for spatial extent in simple fitting = 9.45"
[Wed May 22 01:19:49 2013] source mask rpix=2.2, npix_max = 28, mask sum = 26, frac = 0.909
[Wed May 22 01:19:49 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 9.45"
[Wed May 22 06:00:07 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src30.ximg exists
[Wed May 22 06:00:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src30.csv
[Wed May 22 06:00:07 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src30_1.ximg exists
[Wed May 22 06:00:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src30.csv
[Wed May 22 06:00:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 06:00:09 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Wed May 22 06:00:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src30.csv
[Wed May 22 06:00:09 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Wed May 22 06:00:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src30.csv
[Wed May 22 06:00:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 06:01:00 2013] Source 25 is offset by -2.381068 and -9.222882 pixels which is larger than
2 X fitted extent = 1.086736 x 1.086736, not incorporating fit results
[Wed May 22 06:01:00 2013] Vigneting correction estimate = 1.000000
[Wed May 22 06:01:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 06:01:00 2013] Assessing source extent using major
[Wed May 22 06:01:00 2013] Source does appear to be extended
[Wed May 22 06:01:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 08:38:05 2013] XMMSAS src. selection expression = ellipse(31976.227081, 29916.925293, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 08:38:05 2013] Writing source region out to fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src25_src.reg
[Wed May 22 08:38:05 2013] Extracting stamp from image fullrun_mos2_xmm0603890101_pi300-10000_cl_sm2.00.img.gz, (331, 307) - (406, 382)
[Wed May 22 08:38:05 2013] XMMSAS bgd. selection expression = annulus(31976.227081, 29916.925293, 1087.500000, 2175.000000, X, Y) && !ellipse(28901.066000, 28414.808000, 1243.368036, 846.680024, 343.694100, X, Y) && !ellipse(28956.744600, 28991.954000, 1333.328038, 894.600026, 106.199900, X, Y) && !ellipse(30117.502000, 27219.764000, 1293.496037, 1293.496037, 0.000000, X, Y) && !ellipse(29507.556946, 27615.264465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30001.689758, 29534.319641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30900.648200, 26562.477600, 1360.304039, 373.729611, 92.537340, X, Y) && !ellipse(31270.402000, 27365.782000, 2586.992074, 2586.992074, 0.000000, X, Y)
[Wed May 22 08:38:05 2013] Writing fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src25.gif
[Wed May 22 08:57:04 2013] Mean detx,y = (5859.64, -7199.91) 
[Wed May 22 08:57:07 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 08:57:44 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 08:57:45 2013] Setting source spectrum file to fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Wed May 22 08:57:45 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Wed May 22 09:56:18 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 22 09:56:18 2013] rmf not generated due to insufficient counts
[Wed May 22 10:27:02 2013] Updating aperture counts using extracted products
[Wed May 22 10:27:02 2013] Total counts from fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 392.00
[Wed May 22 10:27:02 2013] Total counts from fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src25_bgd.pi.gz = 1315.00
[Wed May 22 10:27:02 2013] Got source and background scale factors 1038122.000000, 5802869.000000
[Wed May 22 10:27:02 2013] User source parameters:
  Position = (368.1, 344.4) = 4 53 55.98 -10 12 4.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 156.7 +/- 20.8
  Background aperture counts = 235.3
  Rate = 0.002 +/- 0.0003

[Wed May 22 10:27:02 2013] Updating counts from extracted products
[Wed May 22 10:27:02 2013] Set source signif. to 156.75/15.34 = 10.22
[Wed May 22 10:27:14 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 10:27:14 2013] Using photon index=1.80, rate=0.00193, arf fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src25.arf
[Wed May 22 10:27:14 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 10:27:15 2013] Updating source flux to 3.6e-14
[Wed May 22 10:27:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 10:27:45 2013] xmm0603890101/analysis//spectral/fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete