[Tue May 21 11:52:49 2013] Detection parameters:
  Position = (306.7, 348.9) = 4 54 14.07 -10 11 43.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.8 +/- 16.6
  Background counts = 94.2
  Rate = 0.001 +/- 0.0003

[Tue May 21 11:52:51 2013] Off-axis axis estimate = 3.71'
[Tue May 21 16:16:30 2013] Using EEF radius (= 8.28 ")to estimate initial spatial extent for simple fitting
[Tue May 21 16:16:30 2013] Initial guess for spatial extent in simple fitting = 8.28"
[Tue May 21 16:16:30 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.082
[Tue May 21 16:16:30 2013] Giving source the simple spatial ID 88 for pass 0, mean size = 8.28"
[Tue May 21 21:13:08 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src88.ximg exists
[Tue May 21 21:13:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src88.csv
[Tue May 21 21:13:08 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src88_1.ximg exists
[Tue May 21 21:13:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src88.csv
[Tue May 21 21:13:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src88_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 21:13:10 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src88.ximg exists
[Tue May 21 21:13:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src88.csv
[Tue May 21 21:13:10 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src88_1.ximg exists
[Tue May 21 21:13:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src88.csv
[Tue May 21 21:13:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src88_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 21:13:54 2013] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 11.409314 pixels away
[Tue May 21 21:13:54 2013] Warning, spatial fit 88 centroid is now closest to src. 33
[Tue May 21 21:13:54 2013] Vigneting correction estimate = 1.000000
[Tue May 21 21:13:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 21:13:54 2013] Assessing source extent using major
[Tue May 21 21:13:54 2013] Source does appear to be extended
[Tue May 21 21:13:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 01:19:49 2013] Using EEF radius (= 8.28 ")to estimate initial spatial extent for simple fitting
[Wed May 22 01:19:49 2013] Initial guess for spatial extent in simple fitting = 8.28"
[Wed May 22 01:19:49 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.082
[Wed May 22 01:19:49 2013] Giving source the simple spatial ID 70 for pass 1, mean size = 8.28"
[Wed May 22 06:00:08 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src70.ximg exists
[Wed May 22 06:00:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src70.csv
[Wed May 22 06:00:08 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src70_1.ximg exists
[Wed May 22 06:00:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src70.csv
[Wed May 22 06:00:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 06:00:10 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Wed May 22 06:00:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src70.csv
[Wed May 22 06:00:10 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Wed May 22 06:00:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src70.csv
[Wed May 22 06:00:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 06:01:00 2013] Source 24 is offset by 8.321006 and -2.834959 pixels which is larger than
2 X fitted extent = 3.479361 x 7.615219, not incorporating fit results
[Wed May 22 06:01:00 2013] Vigneting correction estimate = 1.000000
[Wed May 22 06:01:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 06:01:00 2013] Assessing source extent using major
[Wed May 22 06:01:00 2013] Source does appear to be extended
[Wed May 22 06:01:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 08:38:06 2013] XMMSAS src. selection expression = ellipse(26634.905518, 30304.020599, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 08:38:06 2013] Writing source region out to fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src24_src.reg
[Wed May 22 08:38:06 2013] Extracting stamp from image fullrun_mos2_xmm0603890101_pi300-10000_cl_sm2.00.img.gz, (269, 311) - (344, 386)
[Wed May 22 08:38:06 2013] XMMSAS bgd. selection expression = annulus(26634.905518, 30304.020599, 1087.500000, 2175.000000, X, Y) && !ellipse(28901.066000, 28414.808000, 1243.368036, 846.680024, 343.694100, X, Y) && !ellipse(28956.744600, 28991.954000, 1333.328038, 894.600026, 106.199900, X, Y) && !ellipse(27963.296000, 27548.850820, 786.571223, 395.703211, 324.895000, X, Y) && !ellipse(28661.685852, 27700.488251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27972.395111, 28752.094910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28071.725067, 28140.089417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29507.556946, 27615.264465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25343.615900, 27887.924000, 321.248009, 321.248009, 0.000000, X, Y) && !ellipse(26759.370636, 27695.666718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27135.187378, 29098.175323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28691.682373, 32543.176727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31270.402000, 27365.782000, 2586.992074, 2586.992074, 0.000000, X, Y) && !ellipse(27045.564209, 28747.666321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26637.398590, 28130.602997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25356.572632, 27463.455200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26583.342194, 29272.342590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25922.064667, 28388.066498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25945.126000, 29199.910800, 1156.240033, 1156.240033, 0.000000, X, Y)
[Wed May 22 08:38:06 2013] Writing fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src24.gif
[Wed May 22 09:17:10 2013] Mean detx,y = (748.51, -5982.77) 
[Wed May 22 09:17:13 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 09:17:41 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 09:17:41 2013] Setting source spectrum file to fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Wed May 22 09:17:41 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Wed May 22 10:09:37 2013] Not generating rmf since there are only 74 counts
[Wed May 22 10:09:37 2013] rmf not generated due to insufficient counts
[Wed May 22 10:27:11 2013] Updating aperture counts using extracted products
[Wed May 22 10:27:11 2013] Total counts from fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 906.00
[Wed May 22 10:27:11 2013] Total counts from fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src24_bgd.pi.gz = 2407.00
[Wed May 22 10:27:11 2013] Got source and background scale factors 1216970.000000, 5444234.000000
[Wed May 22 10:27:11 2013] User source parameters:
  Position = (306.7, 348.9) = 4 54 14.07 -10 11 43.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 368.0 +/- 31.1
  Background aperture counts = 538.0
  Rate = 0.005 +/- 0.0004

[Wed May 22 10:27:11 2013] Updating counts from extracted products
[Wed May 22 10:27:11 2013] Set source signif. to 367.95/23.20 = 15.86
[Wed May 22 10:27:17 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 10:27:17 2013] Using photon index=1.80, rate=0.00453, arf fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src24.arf
[Wed May 22 10:27:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 10:27:17 2013] Updating source flux to 5.8e-14
[Wed May 22 10:27:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 10:27:45 2013] xmm0603890101/analysis//spectral/fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete