[Tue May 21 11:52:51 2013] Detection parameters:
  Position = (394.8, 163.3) = 4 53 48.11 -10 25 11.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.6 +/- 15.5
  Background counts = 34.7
  Rate = 0.001 +/- 0.0002

[Tue May 21 11:52:51 2013] Off-axis axis estimate = 12.03'
[Tue May 21 16:16:30 2013] Using EEF radius (= 12.44 ")to estimate initial spatial extent for simple fitting
[Tue May 21 16:16:30 2013] Initial guess for spatial extent in simple fitting = 12.44"
[Tue May 21 16:16:30 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.085
[Tue May 21 16:16:30 2013] Giving source the simple spatial ID 72 for pass 0, mean size = 12.44"
[Tue May 21 21:13:08 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src72.ximg exists
[Tue May 21 21:13:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src72.csv
[Tue May 21 21:13:08 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src72_1.ximg exists
[Tue May 21 21:13:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src72.csv
[Tue May 21 21:13:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 21:13:10 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Tue May 21 21:13:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src72.csv
[Tue May 21 21:13:10 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Tue May 21 21:13:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src72.csv
[Tue May 21 21:13:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 21:13:54 2013] Warning, spatial fit 72 centroid is now closest to src. 2
[Tue May 21 21:13:54 2013] Vigneting correction estimate = 1.000000
[Tue May 21 21:13:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 21:13:54 2013] Assessing source extent using major
[Tue May 21 21:13:54 2013] Source does appear to be extended
[Tue May 21 21:13:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 01:19:49 2013] Using EEF radius (= 12.44 ")to estimate initial spatial extent for simple fitting
[Wed May 22 01:19:49 2013] Initial guess for spatial extent in simple fitting = 12.44"
[Wed May 22 01:19:49 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.085
[Wed May 22 01:19:49 2013] Giving source the simple spatial ID 59 for pass 1, mean size = 12.44"
[Wed May 22 06:00:08 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src59.ximg exists
[Wed May 22 06:00:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src59.csv
[Wed May 22 06:00:08 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src59_1.ximg exists
[Wed May 22 06:00:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src59.csv
[Wed May 22 06:00:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 06:00:10 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Wed May 22 06:00:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src59.csv
[Wed May 22 06:00:10 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Wed May 22 06:00:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src59.csv
[Wed May 22 06:00:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 06:01:00 2013] Warning, spatial fit 59 centroid is now closest to src. 2
[Wed May 22 06:01:00 2013] Vigneting correction estimate = 1.000000
[Wed May 22 06:01:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 06:01:00 2013] Assessing source extent using major
[Wed May 22 06:01:00 2013] Source does appear to be extended
[Wed May 22 06:01:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 08:38:06 2013] XMMSAS src. selection expression = ellipse(34295.042053, 14158.726379, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 08:38:06 2013] Writing source region out to fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src102_src.reg
[Wed May 22 08:38:06 2013] Extracting stamp from image fullrun_mos2_xmm0603890101_pi300-10000_cl_sm2.00.img.gz, (357, 126) - (432, 201)
[Wed May 22 08:38:06 2013] XMMSAS bgd. selection expression = annulus(34295.042053, 14158.726379, 1087.500000, 2175.000000, X, Y) && !ellipse(32479.163971, 13282.295898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32467.226959, 16472.466263, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 08:38:06 2013] Writing fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src102.gif
[Wed May 22 09:13:00 2013] Mean detx,y = (12464.07, 7341.95) 
[Wed May 22 09:13:03 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 09:13:30 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 09:13:30 2013] Setting source spectrum file to fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Wed May 22 09:13:30 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src102_bgd.pi.gz
[Wed May 22 10:08:42 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 22 10:08:42 2013] rmf not generated due to insufficient counts
[Wed May 22 10:27:09 2013] Updating aperture counts using extracted products
[Wed May 22 10:27:09 2013] Total counts from fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src102_src_b10.pi.gz = 292.00
[Wed May 22 10:27:09 2013] Total counts from fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src102_bgd.pi.gz = 915.00
[Wed May 22 10:27:09 2013] Got source and background scale factors 1270492.000000, 5559005.000000
[Wed May 22 10:27:09 2013] User source parameters:
  Position = (394.8, 163.3) = 4 53 48.11 -10 25 11.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 82.9 +/- 18.1
  Background aperture counts = 209.1
  Rate = 0.001 +/- 0.0002

[Wed May 22 10:27:09 2013] Updating counts from extracted products
[Wed May 22 10:27:09 2013] Set source signif. to 82.88/14.46 = 5.73
[Wed May 22 10:27:16 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 10:27:16 2013] Using photon index=1.80, rate=0.00102, arf fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src102.arf
[Wed May 22 10:27:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 10:27:16 2013] Updating source flux to 3.1e-14
[Wed May 22 10:27:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 10:27:45 2013] xmm0603890101/analysis//spectral/fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src102_pl.csv not found, spectral fit skipped or did not complete