[Tue May 21 11:52:48 2013] Detection parameters:
  Position = (381.4, 458.4) = 4 53 52.07 -10 3 46.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.8 +/- 14.9
  Background counts = 41.8
  Rate = 0.001 +/- 0.0002

[Tue May 21 11:52:51 2013] Off-axis axis estimate = 13.06'
[Tue May 21 16:16:30 2013] Using EEF radius (= 12.96 ")to estimate initial spatial extent for simple fitting
[Tue May 21 16:16:30 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 21 16:16:30 2013] Initial guess for spatial extent in simple fitting = 12.96"
[Tue May 21 16:16:30 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.012
[Tue May 21 16:16:30 2013] Giving source the simple spatial ID 86 for pass 0, mean size = 12.96"
[Tue May 21 21:13:08 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src86.ximg exists
[Tue May 21 21:13:08 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src86.csv
[Tue May 21 21:13:08 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src86_1.ximg exists
[Tue May 21 21:13:08 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src86.csv
[Tue May 21 21:13:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src86_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 21:13:10 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src86.ximg exists
[Tue May 21 21:13:10 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src86.csv
[Tue May 21 21:13:10 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src86_1.ximg exists
[Tue May 21 21:13:10 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src86.csv
[Tue May 21 21:13:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src86_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 21:13:54 2013] Warning: source 86 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 16.740255 pixels away
[Tue May 21 21:13:54 2013] Vigneting correction estimate = 1.000000
[Tue May 21 21:13:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 21:13:54 2013] Assessing source extent using major
[Tue May 21 21:13:54 2013] Source does appear to be extended
[Tue May 21 21:13:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 01:19:49 2013] Using EEF radius (= 12.96 ")to estimate initial spatial extent for simple fitting
[Wed May 22 01:19:49 2013] Initial guess for spatial extent in simple fitting = 12.96"
[Wed May 22 01:19:49 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.012
[Wed May 22 01:19:49 2013] Giving source the simple spatial ID 68 for pass 1, mean size = 12.96"
[Wed May 22 06:00:08 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src68.ximg exists
[Wed May 22 06:00:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src68.csv
[Wed May 22 06:00:08 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src68_1.ximg exists
[Wed May 22 06:00:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src68.csv
[Wed May 22 06:00:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 06:00:10 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src68.ximg exists
[Wed May 22 06:00:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src68.csv
[Wed May 22 06:00:10 2013] fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src68_1.ximg exists
[Wed May 22 06:00:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src68.csv
[Wed May 22 06:00:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 06:01:00 2013] Warning: source 68 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 16.999834 pixels away
[Wed May 22 06:01:00 2013] Vigneting correction estimate = 1.000000
[Wed May 22 06:01:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 06:01:00 2013] Assessing source extent using major
[Wed May 22 06:01:00 2013] Source does appear to be extended
[Wed May 22 06:01:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 08:38:06 2013] XMMSAS src. selection expression = ellipse(33134.534058, 39832.482666, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 08:38:06 2013] Writing source region out to fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src10_src.reg
[Wed May 22 08:38:06 2013] Extracting stamp from image fullrun_mos2_xmm0603890101_pi300-10000_cl_sm2.00.img.gz, (344, 421) - (419, 496)
[Wed May 22 08:38:06 2013] XMMSAS bgd. selection expression = annulus(33134.534058, 39832.482666, 1087.500000, 2175.000000, X, Y) && !ellipse(34520.762024, 36846.087128, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 08:38:06 2013] Writing fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src10.gif
[Wed May 22 09:16:39 2013] Mean detx,y = (4287.13, -16921.41) 
[Wed May 22 09:16:41 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 09:17:00 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 09:17:00 2013] Setting source spectrum file to fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed May 22 09:17:00 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed May 22 10:09:25 2013] Not generating rmf since there are only 95 counts
[Wed May 22 10:09:25 2013] rmf not generated due to insufficient counts
[Wed May 22 10:27:10 2013] Updating aperture counts using extracted products
[Wed May 22 10:27:11 2013] Total counts from fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 275.00
[Wed May 22 10:27:11 2013] Total counts from fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src10_bgd.pi.gz = 954.00
[Wed May 22 10:27:11 2013] Got source and background scale factors 1078466.000000, 5158952.000000
[Wed May 22 10:27:11 2013] User source parameters:
  Position = (381.4, 458.4) = 4 53 52.07 -10 3 46.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 75.6 +/- 17.6
  Background aperture counts = 199.4
  Rate = 0.0009 +/- 0.0002

[Wed May 22 10:27:11 2013] Updating counts from extracted products
[Wed May 22 10:27:11 2013] Set source signif. to 75.57/14.12 = 5.35
[Wed May 22 10:27:17 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 10:27:17 2013] Using photon index=1.80, rate=0.000931, arf fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src10.arf
[Wed May 22 10:27:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 10:27:17 2013] Updating source flux to 3.1e-14
[Wed May 22 10:27:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 10:27:45 2013] xmm0603890101/analysis//spectral/fullrun_mos2_xmm0603890101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete