[Tue May 21 11:51:51 2013] Detection parameters:
  Position = (329.1, 265.3) = 4 54 7.46 -10 17 43.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.6 +/- 16.6
  Background counts = 89.4
  Rate = 0.002 +/- 0.0003

[Tue May 21 11:51:52 2013] Off-axis axis estimate = 3.27'
[Tue May 21 13:46:25 2013] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting
[Tue May 21 13:46:25 2013] Initial guess for spatial extent in simple fitting = 8.07"
[Tue May 21 13:46:25 2013] source mask rpix=1.9, npix_max = 22, mask sum = 19, frac = 0.857
[Tue May 21 13:46:25 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 8.07"
[Tue May 21 16:16:29 2013] fullrun_mos1_xmm0603890101_pi300-10000_cl_pass0_src35.ximg exists
[Tue May 21 16:16:29 2013] fullrun_mos1_xmm0603890101_pi300-10000_cl_pass0_src35_1.ximg exists
[Tue May 21 16:16:29 2013] Fit fullrun_mos1_xmm0603890101_pi300-10000_cl_pass0_src35 appears to have run properly
[Tue May 21 16:16:30 2013] fullrun_mos1_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Tue May 21 16:16:30 2013] fullrun_mos1_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Tue May 21 16:16:30 2013] Fit fullrun_mos1_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Tue May 21 21:13:35 2013] Source 55 is offset by -7.290111 and 6.712658 pixels which is larger than
2 X fitted extent = 0.927117 x 0.927117, not incorporating fit results
[Tue May 21 21:13:35 2013] Vigneting correction estimate = 1.000000
[Tue May 21 21:13:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 21:13:35 2013] Assessing source extent using major
[Tue May 21 21:13:35 2013] Source does appear to be extended
[Tue May 21 21:13:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 22:56:23 2013] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting
[Tue May 21 22:56:23 2013] Initial guess for spatial extent in simple fitting = 8.07"
[Tue May 21 22:56:23 2013] source mask rpix=1.9, npix_max = 22, mask sum = 19, frac = 0.857
[Tue May 21 22:56:23 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 8.07"
[Wed May 22 01:19:47 2013] fullrun_mos1_xmm0603890101_pi300-10000_cl_pass1_src32.ximg exists
[Wed May 22 01:19:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603890101_pi300-10000_cl_pass1_src32.csv
[Wed May 22 01:19:47 2013] fullrun_mos1_xmm0603890101_pi300-10000_cl_pass1_src32_1.ximg exists
[Wed May 22 01:19:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603890101_pi300-10000_cl_pass1_src32.csv
[Wed May 22 01:19:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603890101_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603890101_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 01:19:49 2013] fullrun_mos1_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Wed May 22 01:19:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src32.csv
[Wed May 22 01:19:49 2013] fullrun_mos1_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Wed May 22 01:19:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src32.csv
[Wed May 22 01:19:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 06:00:39 2013] Spatial fit model total counts = 467.846000, observed total counts = 1081.000000
[Wed May 22 06:00:39 2013] Poor agreement between spatial fit and data for source 55
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 22 06:00:39 2013] Vigneting correction estimate = 1.000000
[Wed May 22 06:00:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 06:00:39 2013] Assessing source extent using major
[Wed May 22 06:00:39 2013] Source does appear to be extended
[Wed May 22 06:00:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 07:02:47 2013] XMMSAS src. selection expression = ellipse(28585.534302, 23032.227234, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 07:02:47 2013] Writing source region out to fullrun_mos1_xmm0603890101_pi300-10000_pass1_cl_src55_src.reg
[Wed May 22 07:02:47 2013] Extracting stamp from image fullrun_mos1_xmm0603890101_pi300-10000_cl_sm2.00.img.gz, (292, 228) - (367, 303)
[Wed May 22 07:02:48 2013] XMMSAS bgd. selection expression = annulus(28585.534302, 23032.227234, 1087.500000, 2175.000000, X, Y) && !ellipse(27824.255600, 26011.064400, 1151.784033, 1151.784033, 0.000000, X, Y) && !ellipse(28405.508000, 26449.030000, 1933.360056, 1933.360056, 0.000000, X, Y) && !ellipse(27675.616000, 26116.714000, 1179.696034, 1179.696034, 0.000000, X, Y) && !ellipse(28971.934200, 25151.505200, 509.374415, 266.328808, 57.797000, X, Y) && !ellipse(29072.246307, 25705.889526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29720.702698, 25703.173431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26597.281097, 25296.744202, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 07:02:48 2013] Writing fullrun_mos1_xmm0603890101_pi300-10000_pass1_cl_src55.gif
[Wed May 22 07:19:08 2013] Mean detx,y = (647.52, -4685.87) 
[Wed May 22 07:19:10 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 07:19:32 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 07:19:32 2013] Setting source spectrum file to fullrun_mos1_xmm0603890101_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Wed May 22 07:19:32 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0603890101_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Wed May 22 08:31:16 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 22 08:31:16 2013] rmf not generated due to insufficient counts
[Wed May 22 10:26:50 2013] Updating aperture counts using extracted products
[Wed May 22 10:26:50 2013] Total counts from fullrun_mos1_xmm0603890101_pi300-10000_pass1_cl_src55_src_b10.pi.gz = 749.00
[Wed May 22 10:26:50 2013] Total counts from fullrun_mos1_xmm0603890101_pi300-10000_pass1_cl_src55_bgd.pi.gz = 4364.00
[Wed May 22 10:26:50 2013] Got source and background scale factors 1272032.000000, 9262607.000000
[Wed May 22 10:26:50 2013] User source parameters:
  Position = (329.1, 265.3) = 4 54 7.46 -10 17 43.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 149.7 +/- 28.4
  Background aperture counts = 599.3
  Rate = 0.002 +/- 0.0003

[Wed May 22 10:26:50 2013] Updating counts from extracted products
[Wed May 22 10:26:50 2013] Set source signif. to 149.69/24.48 = 6.11
[Wed May 22 10:26:55 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 10:26:55 2013] Using photon index=1.80, rate=0.00184, arf fullrun_mos1_xmm0603890101_pi300-10000_pass1_cl_src55.arf
[Wed May 22 10:26:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 10:26:55 2013] Updating source flux to 2.2e-14
[Wed May 22 10:27:20 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 10:27:34 2013] xmm0603890101/analysis//spectral/fullrun_mos1_xmm0603890101_pi300-10000_pass1_cl_src55_pl.csv not found, spectral fit skipped or did not complete