[Tue May 21 11:51:51 2013] Detection parameters:
  Position = (338.8, 342.1) = 4 54 4.63 -10 12 11.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.0 +/- 21.1
  Background counts = 193.5
  Rate = 0.002 +/- 0.0004

[Tue May 21 11:51:52 2013] Off-axis axis estimate = 4.31'
[Tue May 21 13:46:25 2013] Using EEF radius (= 8.58 ")to estimate initial spatial extent for simple fitting
[Tue May 21 13:46:25 2013] Initial guess for spatial extent in simple fitting = 8.58"
[Tue May 21 13:46:25 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.022
[Tue May 21 13:46:25 2013] Giving source the simple spatial ID 46 for pass 0, mean size = 8.58"
[Tue May 21 16:16:29 2013] fullrun_mos1_xmm0603890101_pi300-10000_cl_pass0_src46.ximg exists
[Tue May 21 16:16:29 2013] fullrun_mos1_xmm0603890101_pi300-10000_cl_pass0_src46_1.ximg exists
[Tue May 21 16:16:29 2013] Fit fullrun_mos1_xmm0603890101_pi300-10000_cl_pass0_src46 appears to have run properly
[Tue May 21 16:16:30 2013] fullrun_mos1_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Tue May 21 16:16:30 2013] fullrun_mos1_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Tue May 21 16:16:30 2013] Fit fullrun_mos1_xmm0603890101_pi300-10000_cl_pass0_tfrozen_src46 appears to have run properly
[Tue May 21 21:13:35 2013] Spatial fit model total counts = 1972.570000, observed total counts = 1936.000000
[Tue May 21 21:13:35 2013] Offset between fit and detection position for source 33 = 2.999627 pixels
[Tue May 21 21:13:35 2013] 1668.840000 total counts/ 1229.650000 bgd. counts: snr = 12.524537
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 2.999627 pixels
  Position = (341.5, 343.2) = 4 54 3.81 -10 12 8.2
  Extent = 17.2 (17.1-34.3)" x 11.2 (9.2-13.8)", rotation angle = 23 (8-38) degrees
  Source counts = 439.2 +/- 40.9
  Background counts = 1229.7
  Rate = 0.005 +/- 0.0005
[Tue May 21 21:13:35 2013] Vigneting correction estimate = 1.000000
[Tue May 21 21:13:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 21:13:35 2013] Assessing source extent using major axis lower bound
[Tue May 21 21:13:35 2013] Source does appear to be extended
[Tue May 21 21:13:35 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.24
[Tue May 21 22:56:23 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 21 22:56:23 2013] Initial guess for spatial extent in simple fitting = 14.18"
[Tue May 21 22:56:23 2013] source mask rpix=3.3, npix_max = 56, mask sum = 55, frac = 0.973
[Tue May 21 22:56:23 2013] Giving source the simple spatial ID 40 for pass 1, mean size = 14.18"
[Wed May 22 01:19:47 2013] fullrun_mos1_xmm0603890101_pi300-10000_cl_pass1_src40.ximg exists
[Wed May 22 01:19:47 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0603890101_pi300-10000_cl_pass1_src40.csv
[Wed May 22 01:19:47 2013] fullrun_mos1_xmm0603890101_pi300-10000_cl_pass1_src40_1.ximg exists
[Wed May 22 01:19:47 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0603890101_pi300-10000_cl_pass1_src40.csv
[Wed May 22 01:19:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603890101_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603890101_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 01:19:49 2013] fullrun_mos1_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Wed May 22 01:19:49 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src40.csv
[Wed May 22 01:19:49 2013] fullrun_mos1_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Wed May 22 01:19:49 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src40.csv
[Wed May 22 01:19:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603890101_pi300-10000_cl_pass1_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 06:00:39 2013] Warning, spatial fit 40 centroid is now closest to src. 37
[Wed May 22 06:00:39 2013] Vigneting correction estimate = 1.000000
[Wed May 22 06:00:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 06:00:39 2013] Assessing source extent using major axis lower bound
[Wed May 22 06:00:39 2013] Source does appear to be extended
[Wed May 22 06:00:39 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.24
[Wed May 22 07:02:48 2013] XMMSAS src. selection expression = ellipse(29665.422000, 29813.515000, 1029.984030, 671.550019, 22.681800, X, Y)
[Wed May 22 07:02:48 2013] Writing source region out to fullrun_mos1_xmm0603890101_pi300-10000_pass1_cl_src33_src.reg
[Wed May 22 07:02:48 2013] Extracting stamp from image fullrun_mos1_xmm0603890101_pi300-10000_cl_sm2.00.img.gz, (282, 284) - (401, 402)
[Wed May 22 07:02:48 2013] XMMSAS bgd. selection expression = annulus(29665.422000, 29813.515000, 1716.640049, 3433.280099, X, Y) && !ellipse(28954.950000, 28414.306000, 1098.640032, 593.151217, 356.659330, X, Y) && !ellipse(28032.422000, 27227.023800, 1138.168033, 1138.168033, 0.000000, X, Y) && !ellipse(28748.490600, 27162.097800, 1232.592035, 1232.592035, 0.000000, X, Y) && !ellipse(27824.255600, 26011.064400, 1151.784033, 1151.784033, 0.000000, X, Y) && !ellipse(28405.508000, 26449.030000, 1933.360056, 1933.360056, 0.000000, X, Y) && !ellipse(27675.616000, 26116.714000, 1179.696034, 1179.696034, 0.000000, X, Y) && !ellipse(28085.284302, 26571.978668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27831.424000, 27123.528000, 1198.312034, 1049.416030, 323.418000, X, Y) && !ellipse(28639.511047, 27698.398743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29218.814545, 27504.674530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29072.246307, 25705.889526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29574.970795, 26139.187653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29720.702698, 25703.173431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27092.308655, 27686.700684, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 07:02:48 2013] Writing fullrun_mos1_xmm0603890101_pi300-10000_pass1_cl_src33.gif
[Wed May 22 07:22:24 2013] Mean detx,y = (-5896.79, -3751.27) 
[Wed May 22 07:22:26 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 07:23:32 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 07:23:32 2013] Setting source spectrum file to fullrun_mos1_xmm0603890101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Wed May 22 07:23:32 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0603890101_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Wed May 22 10:26:51 2013] Updating aperture counts using extracted products
[Wed May 22 10:26:51 2013] Total counts from fullrun_mos1_xmm0603890101_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 1668.00
[Wed May 22 10:26:51 2013] Total counts from fullrun_mos1_xmm0603890101_pi300-10000_pass1_cl_src33_bgd.pi.gz = 6799.00
[Wed May 22 10:26:51 2013] Got source and background scale factors 1601152.000000, 9119284.000000
[Wed May 22 10:26:51 2013] User source parameters:
  Position = (341.5, 343.2) = 4 54 3.81 -10 12 8.2
  Extent = 17.2 (17.1-34.3)" x 11.2 (9.2-13.8)", rotation angle = 23 (8-38) degrees
  Source aperture counts = 474.2 +/- 41.9
  Background aperture counts = 1193.8
  Rate = 0.006 +/- 0.0005

[Wed May 22 10:26:55 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 10:26:55 2013] Using photon index=1.80, rate=0.00541, arf fullrun_mos1_xmm0603890101_pi300-10000_pass1_cl_src33.arf
[Wed May 22 10:26:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 10:26:55 2013] Updating source flux to 7.8e-14
[Wed May 22 10:27:34 2013] xmm0603890101/analysis//spectral/fullrun_mos1_xmm0603890101_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete