[Sat May  5 21:55:50 2012] Detection parameters:
  Position = (295.8, 327.2) = 17 50 39.82 -28 52 54.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.6 +/- 10.9
  Background counts = 20.0
  Rate = 0.003 +/- 0.0006

[Sat May  5 21:55:51 2012] Off-axis axis estimate = 2.09'
[Sat May  5 23:34:27 2012] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Sat May  5 23:34:27 2012] Initial guess for spatial extent in simple fitting = 7.48"
[Sat May  5 23:34:27 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.813
[Sat May  5 23:34:27 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.48"
[Sun May  6 00:09:54 2012] fullrun_mos2_xmm0603850201_pi300-10000_cl_pass0_src9.ximg exists
[Sun May  6 00:09:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603850201_pi300-10000_cl_pass0_src9.csv
[Sun May  6 00:09:54 2012] fullrun_mos2_xmm0603850201_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun May  6 00:09:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603850201_pi300-10000_cl_pass0_src9.csv
[Sun May  6 00:09:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603850201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603850201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 00:09:54 2012] fullrun_mos2_xmm0603850201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun May  6 00:09:54 2012] fullrun_mos2_xmm0603850201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun May  6 00:09:54 2012] Fit fullrun_mos2_xmm0603850201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sun May  6 00:10:12 2012] Source 7 is offset by -6.035002 and 2.251930 pixels which is larger than
2 X fitted extent = 0.859205 x 0.859205, not incorporating fit results
[Sun May  6 00:10:12 2012] Vigneting correction estimate = 1.000000
[Sun May  6 00:10:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 00:10:12 2012] Assessing source extent using major
[Sun May  6 00:10:12 2012] Source does appear to be extended
[Sun May  6 00:10:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 01:48:09 2012] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Sun May  6 01:48:09 2012] Initial guess for spatial extent in simple fitting = 7.48"
[Sun May  6 01:48:09 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.813
[Sun May  6 01:48:09 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 7.48"
[Sun May  6 02:21:16 2012] fullrun_mos2_xmm0603850201_pi300-10000_cl_pass1_src9.ximg exists
[Sun May  6 02:21:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603850201_pi300-10000_cl_pass1_src9.csv
[Sun May  6 02:21:16 2012] fullrun_mos2_xmm0603850201_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun May  6 02:21:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603850201_pi300-10000_cl_pass1_src9.csv
[Sun May  6 02:21:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603850201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603850201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 02:21:16 2012] fullrun_mos2_xmm0603850201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun May  6 02:21:16 2012] fullrun_mos2_xmm0603850201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun May  6 02:21:16 2012] Fit fullrun_mos2_xmm0603850201_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sun May  6 02:21:34 2012] Spatial fit model total counts = 207.993000, observed total counts = 209.000000
[Sun May  6 02:21:34 2012] Offset between fit and detection position for source 7 = 0.237999 pixels
[Sun May  6 02:21:34 2012] 212.034700 total counts/ 178.027000 bgd. counts: snr = 2.548792
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.237999 pixels
  Position = (296.0, 327.0) = 17 50 39.77 -28 52 54.6
  Extent = 5.4 (2.9-10.1)", rotation angle = 0
  Source counts = 34.0 +/- 14.6
  Background counts = 178.0
  Rate = 0.002 +/- 0.0007
[Sun May  6 02:21:34 2012] Vigneting correction estimate = 1.000000
[Sun May  6 02:21:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 02:21:34 2012] Assessing source extent using major axis lower bound
[Sun May  6 02:21:34 2012] Source does appear to be extended
[Sun May  6 02:21:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 03:24:15 2012] XMMSAS src. selection expression = ellipse(25702.929000, 28401.227000, 326.121009, 326.121009, 0.000000, X, Y)
[Sun May  6 03:24:15 2012] Writing source region out to fullrun_mos2_xmm0603850201_pi300-10000_pass1_cl_src7_src.reg
[Sun May  6 03:24:15 2012] Extracting stamp from image fullrun_mos2_xmm0603850201_pi300-10000_cl_sm2.00.img.gz, (277, 308) - (315, 346)
[Sun May  6 03:24:15 2012] XMMSAS bgd. selection expression = annulus(25702.929000, 28401.227000, 543.535016, 1087.070031, X, Y)
[Sun May  6 03:24:15 2012] Writing fullrun_mos2_xmm0603850201_pi300-10000_pass1_cl_src7.gif
[Sun May  6 03:28:28 2012] Mean detx,y = (1085.28, -4126.85) 
[Sun May  6 03:28:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May  6 03:28:45 2012] Binned source spectrum to 10 counts/bin
[Sun May  6 03:28:46 2012] Setting source spectrum file to fullrun_mos2_xmm0603850201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun May  6 03:28:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0603850201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun May  6 03:39:15 2012] Not generating rmf since there are only 34 counts
[Sun May  6 03:39:15 2012] rmf not generated due to insufficient counts
[Sun May  6 03:41:05 2012] Updating aperture counts using extracted products
[Sun May  6 03:41:05 2012] Error reading totcts from fullrun_mos2_xmm0603850201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun May  6 03:41:06 2012] Calculating source flux in energy range 0.30-8.00
[Sun May  6 03:41:06 2012] Using photon index=1.80, rate=0.00171, arf fullrun_mos2_xmm0603850201_pi300-10000_pass1_cl_src7.arf
[Sun May  6 03:41:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  6 03:41:06 2012] Updating source flux to 2e-14
[Sun May  6 03:41:09 2012] Flag b found in src. 7 procflags, skipping spectral fitting
[Sun May  6 03:41:09 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting