[Tue Mar 27 10:47:28 2012] Detection parameters:
  Position = (345.3, 233.4) = 14 11 59.72 -34 22 43.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 206.7 +/- 18.5
  Background counts = 147.3
  Rate = 0.003 +/- 0.0003

[Tue Mar 27 10:47:29 2012] Off-axis axis estimate = 5.81'
[Tue Mar 27 10:53:55 2012] Using EEF radius (= 9.33 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 10:53:55 2012] Initial guess for spatial extent in simple fitting = 9.33"
[Tue Mar 27 10:53:55 2012] source mask rpix=2.1, npix_max = 27, mask sum = 14, frac = 0.500
[Tue Mar 27 10:53:55 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 9.33"
[Tue Mar 27 13:40:49 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src29.ximg exists
[Tue Mar 27 13:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src29.csv
[Tue Mar 27 13:40:49 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src29_1.ximg exists
[Tue Mar 27 13:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src29.csv
[Tue Mar 27 13:40:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 13:40:50 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Tue Mar 27 13:40:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src29.csv
[Tue Mar 27 13:40:50 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Tue Mar 27 13:40:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src29.csv
[Tue Mar 27 13:40:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:03:18 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 14.964384 pixels away
[Tue Mar 27 16:03:18 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:03:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:03:18 2012] Assessing source extent using major
[Tue Mar 27 16:03:18 2012] Source does appear to be extended
[Tue Mar 27 16:03:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 16:04:00 2012] Using EEF radius (= 9.33 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 16:04:00 2012] Initial guess for spatial extent in simple fitting = 9.33"
[Tue Mar 27 16:04:00 2012] source mask rpix=2.1, npix_max = 27, mask sum = 14, frac = 0.500
[Tue Mar 27 16:04:00 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 9.33"
[Tue Mar 27 18:25:39 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_src29.ximg exists
[Tue Mar 27 18:25:39 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_src29_1.ximg exists
[Tue Mar 27 18:25:39 2012] Fit fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_src29 appears to have run properly
[Tue Mar 27 18:25:40 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Tue Mar 27 18:25:40 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src29.csv
[Tue Mar 27 18:25:40 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Tue Mar 27 18:25:40 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src29.csv
[Tue Mar 27 18:25:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 20:38:39 2012] Spatial fit model total counts = 735.226000, observed total counts = 736.000000
[Tue Mar 27 20:38:39 2012] Offset between fit and detection position for source 30 = 0.671040 pixels
[Tue Mar 27 20:38:39 2012] 736.043500 total counts/ 669.926000 bgd. counts: snr = 2.554483
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.671040 pixels
  Position = (345.9, 233.4) = 14 11 59.49 -34 22 44.0
  Extent = 4.1" x 4.1", rotation angle = 0
  Source counts = 66.1 +/- 27.1
  Background counts = 669.9
  Rate = 0.001 +/- 0.0005
[Tue Mar 27 20:38:39 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 20:38:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 20:38:39 2012] Assessing source extent using major
[Tue Mar 27 20:38:39 2012] Source does appear to be extended
[Tue Mar 27 20:38:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 20:39:23 2012] XMMSAS src. selection expression = ellipse(30048.683400, 20259.650000, 248.341807, 248.341807, 0.000000, X, Y)
[Tue Mar 27 20:39:23 2012] Writing source region out to fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src30_src.reg
[Tue Mar 27 20:39:23 2012] Extracting stamp from image fullrun_pn_xmm0603751001_pi300-10000_cl_sm2.00.img.gz, (332, 219) - (360, 248)
[Tue Mar 27 20:39:23 2012] XMMSAS bgd. selection expression = annulus(30048.683400, 20259.650000, 413.903012, 827.806024, X, Y)
[Tue Mar 27 20:39:23 2012] Writing fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src30.gif
[Tue Mar 27 21:23:08 2012] Mean detx,y = (-1928.67, -5420.50) 
[Tue Mar 27 21:23:14 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 21:23:48 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 21:23:48 2012] Setting source spectrum file to fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Tue Mar 27 21:23:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Tue Mar 27 23:07:18 2012] Not generating rmf since there are only 66 counts
[Tue Mar 27 23:07:18 2012] rmf not generated due to insufficient counts
[Wed Mar 28 01:21:27 2012] Updating aperture counts using extracted products
[Wed Mar 28 01:21:27 2012] Error reading totcts from fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Wed Mar 28 01:21:30 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 01:21:30 2012] Using photon index=1.80, rate=0.00119, arf fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src30.arf
[Wed Mar 28 01:21:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 01:21:30 2012] Getting flux using calc_pl_flux failed
[Wed Mar 28 01:24:01 2012] Source 30 has fewer than 100.000000 counts, skipping spectral fitting