[Tue Mar 27 10:47:27 2012] Detection parameters:
  Position = (257.0, 412.3) = 14 12 30.69 -34 9 45.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1202.5 +/- 42.5
  Background counts = 114.8
  Rate = 0.02 +/- 0.0007

[Tue Mar 27 10:47:29 2012] Off-axis axis estimate = 8.78'
[Tue Mar 27 10:53:55 2012] Using EEF radius (= 10.82 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 10:53:55 2012] Initial guess for spatial extent in simple fitting = 10.82"
[Tue Mar 27 10:53:55 2012] source mask rpix=2.5, npix_max = 35, mask sum = 27, frac = 0.756
[Tue Mar 27 10:53:55 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 10.82"
[Tue Mar 27 13:40:49 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src19.ximg exists
[Tue Mar 27 13:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src19.csv
[Tue Mar 27 13:40:49 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue Mar 27 13:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src19.csv
[Tue Mar 27 13:40:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 13:40:50 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue Mar 27 13:40:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src19.csv
[Tue Mar 27 13:40:50 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Mar 27 13:40:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src19.csv
[Tue Mar 27 13:40:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:03:18 2012] Spatial fit model total counts = 1804.140000, observed total counts = 1589.000000
[Tue Mar 27 16:03:18 2012] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar 27 16:03:18 2012] Source 20 is offset by 4.278434 and 4.370451 pixels which is larger than
2 X fitted extent = 2.296520 x 2.296520, not incorporating fit results
[Tue Mar 27 16:03:18 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:03:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:03:18 2012] Assessing source extent using major
[Tue Mar 27 16:03:18 2012] Source does appear to be extended
[Tue Mar 27 16:03:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 16:04:00 2012] Using EEF radius (= 10.82 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 16:04:00 2012] Initial guess for spatial extent in simple fitting = 10.82"
[Tue Mar 27 16:04:00 2012] source mask rpix=2.5, npix_max = 35, mask sum = 27, frac = 0.756
[Tue Mar 27 16:04:00 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 10.82"
[Tue Mar 27 18:25:39 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_src19.ximg exists
[Tue Mar 27 18:25:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_src19.csv
[Tue Mar 27 18:25:39 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_src19_1.ximg exists
[Tue Mar 27 18:25:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_src19.csv
[Tue Mar 27 18:25:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 18:25:40 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Tue Mar 27 18:25:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src19.csv
[Tue Mar 27 18:25:40 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Tue Mar 27 18:25:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src19.csv
[Tue Mar 27 18:25:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 20:38:39 2012] Spatial fit model total counts = 1804.030000, observed total counts = 1589.000000
[Tue Mar 27 20:38:39 2012] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar 27 20:38:39 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 20:38:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 20:38:39 2012] Assessing source extent using major
[Tue Mar 27 20:38:39 2012] Source does appear to be extended
[Tue Mar 27 20:38:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 20:39:22 2012] Counts = 1202.535278, rescaling region sizes by 2.000000
[Tue Mar 27 20:39:22 2012] XMMSAS src. selection expression = ellipse(22312.379761, 35817.271240, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Mar 27 20:39:22 2012] Writing source region out to fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src20_src.reg
[Tue Mar 27 20:39:22 2012] Extracting stamp from image fullrun_pn_xmm0603751001_pi300-10000_cl_sm2.00.img.gz, (182, 337) - (332, 487)
[Tue Mar 27 20:39:22 2012] XMMSAS bgd. selection expression = annulus(22312.379761, 35817.271240, 4350.000000, 8700.000000, X, Y) && !ellipse(25839.425800, 34873.921400, 380.351211, 380.351211, 0.000000, X, Y) && !ellipse(16062.839050, 32222.119965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24145.900513, 31200.990387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27211.856659, 29283.002533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29621.140220, 28576.932800, 462.582413, 462.582413, 0.000000, X, Y) && !ellipse(29855.514800, 27196.263400, 448.979213, 448.979213, 0.000000, X, Y) && !ellipse(23450.617371, 26843.827118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25749.097473, 38511.101135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29775.537320, 34859.079200, 481.549214, 481.549214, 0.000000, X, Y) && !ellipse(19621.736000, 34326.594000, 396.784011, 396.784011, 0.000000, X, Y) && !ellipse(28013.285217, 37321.695801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21330.016600, 34789.366000, 581.242417, 581.242417, 0.000000, X, Y) && !ellipse(14661.283600, 31321.852631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30466.574768, 28615.798981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22142.389800, 27818.045600, 307.024809, 307.024809, 0.000000, X, Y) && !ellipse(21761.745270, 27342.577026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15204.306122, 26442.182251, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 27 20:39:22 2012] Writing fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src20.gif
[Tue Mar 27 21:10:09 2012] Mean detx,y = (-2575.77, 11871.21) 
[Tue Mar 27 21:10:16 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 21:12:40 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 21:12:40 2012] Setting source spectrum file to fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue Mar 27 21:12:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Tue Mar 27 22:53:42 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Mar 27 22:53:42 2012] rmf not generated due to insufficient counts
[Wed Mar 28 01:21:27 2012] Updating aperture counts using extracted products
[Wed Mar 28 01:21:27 2012] Error reading totcts from fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Mar 28 01:21:30 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 01:21:30 2012] Using photon index=1.80, rate=0.0202, arf fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src20.arf
[Wed Mar 28 01:21:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 01:21:30 2012] Updating source flux to 1.4e-13
[Wed Mar 28 01:24:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting