[Tue Mar 27 10:47:27 2012] Detection parameters:
  Position = (297.3, 211.1) = 14 12 16.58 -34 24 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1411.2 +/- 48.1
  Background counts = 152.5
  Rate = 0.04 +/- 0.001

[Tue Mar 27 10:47:29 2012] Off-axis axis estimate = 6.33'
[Tue Mar 27 10:53:55 2012] Using EEF radius (= 9.59 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 10:53:55 2012] Initial guess for spatial extent in simple fitting = 9.59"
[Tue Mar 27 10:53:55 2012] source mask rpix=2.2, npix_max = 29, mask sum = 29, frac = 0.990
[Tue Mar 27 10:53:55 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 9.59"
[Tue Mar 27 13:40:49 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src16.ximg exists
[Tue Mar 27 13:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src16.csv
[Tue Mar 27 13:40:49 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src16_1.ximg exists
[Tue Mar 27 13:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src16.csv
[Tue Mar 27 13:40:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 13:40:50 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Tue Mar 27 13:40:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src16.csv
[Tue Mar 27 13:40:50 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Tue Mar 27 13:40:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src16.csv
[Tue Mar 27 13:40:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:03:18 2012] Spatial fit model total counts = 2386.010000, observed total counts = 2064.000000
[Tue Mar 27 16:03:18 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar 27 16:03:18 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:03:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:03:18 2012] Assessing source extent using major
[Tue Mar 27 16:03:18 2012] Source does appear to be extended
[Tue Mar 27 16:03:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 16:04:00 2012] Using EEF radius (= 9.59 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 16:04:00 2012] Initial guess for spatial extent in simple fitting = 9.59"
[Tue Mar 27 16:04:00 2012] source mask rpix=2.2, npix_max = 29, mask sum = 29, frac = 0.990
[Tue Mar 27 16:04:00 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 9.59"
[Tue Mar 27 18:25:39 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_src16.ximg exists
[Tue Mar 27 18:25:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_src16.csv
[Tue Mar 27 18:25:39 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_src16_1.ximg exists
[Tue Mar 27 18:25:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_src16.csv
[Tue Mar 27 18:25:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 18:25:40 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Tue Mar 27 18:25:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src16.csv
[Tue Mar 27 18:25:40 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Tue Mar 27 18:25:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src16.csv
[Tue Mar 27 18:25:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 20:38:39 2012] Spatial fit model total counts = 2385.160000, observed total counts = 2064.000000
[Tue Mar 27 20:38:39 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar 27 20:38:39 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 20:38:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 20:38:39 2012] Assessing source extent using major
[Tue Mar 27 20:38:39 2012] Source does appear to be extended
[Tue Mar 27 20:38:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 20:39:22 2012] Counts = 1411.179443, rescaling region sizes by 2.000000
[Tue Mar 27 20:39:22 2012] XMMSAS src. selection expression = ellipse(25815.467896, 18318.080673, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Mar 27 20:39:22 2012] Writing source region out to fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src17_src.reg
[Tue Mar 27 20:39:22 2012] Extracting stamp from image fullrun_pn_xmm0603751001_pi300-10000_cl_sm2.00.img.gz, (222, 136) - (372, 286)
[Tue Mar 27 20:39:22 2012] XMMSAS bgd. selection expression = annulus(25815.467896, 18318.080673, 4350.000000, 8700.000000, X, Y) && !ellipse(24719.635400, 23120.285600, 599.119217, 599.119217, 0.000000, X, Y) && !ellipse(32415.801697, 11368.283951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29855.514800, 27196.263400, 448.979213, 448.979213, 0.000000, X, Y) && !ellipse(23450.617371, 26843.827118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30510.831451, 25106.883057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24435.192505, 21843.704697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33501.340800, 17929.049400, 365.703211, 365.703211, 0.000000, X, Y) && !ellipse(35199.392822, 27464.251709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22110.346634, 21507.190353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30048.683400, 20259.650000, 331.122410, 331.122410, 0.000000, X, Y) && !ellipse(18326.085587, 16921.148956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25876.921204, 16432.681976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21761.745270, 27342.577026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34670.696838, 25958.637695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33271.605255, 24590.867493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30853.279785, 12742.300110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34064.558960, 22573.419586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26447.524170, 21777.971481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25594.134033, 22049.851791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25001.295197, 21894.617538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26301.901123, 21158.570404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24051.087324, 17457.557200, 320.594257, 320.594257, 0.000000, X, Y) && !ellipse(27832.744000, 15009.218200, 472.747214, 472.747214, 0.000000, X, Y) && !ellipse(19677.519394, 15191.658890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27332.517120, 9467.569717, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 27 20:39:22 2012] Writing fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src17.gif
[Tue Mar 27 21:04:45 2012] Mean detx,y = (2562.09, -5121.78) 
[Tue Mar 27 21:04:55 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 21:08:14 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 21:08:14 2012] Setting source spectrum file to fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Mar 27 21:08:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Tue Mar 27 22:46:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Mar 27 22:46:26 2012] rmf not generated due to insufficient counts
[Wed Mar 28 01:21:26 2012] Updating aperture counts using extracted products
[Wed Mar 28 01:21:26 2012] Error reading totcts from fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Mar 28 01:21:30 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 01:21:30 2012] Using photon index=1.80, rate=0.0382, arf fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src17.arf
[Wed Mar 28 01:21:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 01:21:30 2012] Updating source flux to 1.1e-13
[Wed Mar 28 01:24:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting