[Tue Mar 27 10:47:27 2012] Detection parameters:
  Position = (270.1, 309.1) = 14 12 26.12 -34 17 14.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1085.6 +/- 45.3
  Background counts = 188.9
  Rate = 0.02 +/- 0.001

[Tue Mar 27 10:47:29 2012] Off-axis axis estimate = 2.19'
[Tue Mar 27 10:53:55 2012] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 10:53:55 2012] Initial guess for spatial extent in simple fitting = 7.53"
[Tue Mar 27 10:53:55 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.804
[Tue Mar 27 10:53:55 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.53"
[Tue Mar 27 13:40:49 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src9.ximg exists
[Tue Mar 27 13:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src9.csv
[Tue Mar 27 13:40:49 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue Mar 27 13:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src9.csv
[Tue Mar 27 13:40:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 13:40:50 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue Mar 27 13:40:50 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Mar 27 13:40:50 2012] Fit fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Tue Mar 27 16:03:18 2012] Warning, spatial fit 9 centroid is now closest to src. 45
[Tue Mar 27 16:03:18 2012] Warning: source 44 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 15.579586 pixels away
[Tue Mar 27 16:03:18 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:03:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:03:18 2012] Assessing source extent using major
[Tue Mar 27 16:03:18 2012] Source does appear to be extended
[Tue Mar 27 16:03:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 16:04:00 2012] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 16:04:00 2012] Initial guess for spatial extent in simple fitting = 7.53"
[Tue Mar 27 16:04:00 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.804
[Tue Mar 27 16:04:00 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 7.53"
[Tue Mar 27 18:25:39 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_src9.ximg exists
[Tue Mar 27 18:25:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_src9.csv
[Tue Mar 27 18:25:39 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue Mar 27 18:25:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_src9.csv
[Tue Mar 27 18:25:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 18:25:39 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue Mar 27 18:25:40 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Mar 27 18:25:40 2012] Fit fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Tue Mar 27 20:38:39 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 10.507227 pixels away
[Tue Mar 27 20:38:39 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 20:38:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 20:38:39 2012] Assessing source extent using major
[Tue Mar 27 20:38:39 2012] Source does appear to be extended
[Tue Mar 27 20:38:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 20:39:22 2012] Counts = 1085.560425, rescaling region sizes by 2.000000
[Tue Mar 27 20:39:22 2012] XMMSAS src. selection expression = ellipse(23450.617371, 26843.827118, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Mar 27 20:39:22 2012] Writing source region out to fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src10_src.reg
[Tue Mar 27 20:39:22 2012] Extracting stamp from image fullrun_pn_xmm0603751001_pi300-10000_cl_sm2.00.img.gz, (195, 234) - (345, 384)
[Tue Mar 27 20:39:22 2012] XMMSAS bgd. selection expression = annulus(23450.617371, 26843.827118, 4350.000000, 8700.000000, X, Y) && !ellipse(24719.635400, 23120.285600, 599.119217, 599.119217, 0.000000, X, Y) && !ellipse(25839.425800, 34873.921400, 380.351211, 380.351211, 0.000000, X, Y) && !ellipse(16062.839050, 32222.119965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24145.900513, 31200.990387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27211.856659, 29283.002533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29621.140220, 28576.932800, 462.582413, 462.582413, 0.000000, X, Y) && !ellipse(29855.514800, 27196.263400, 448.979213, 448.979213, 0.000000, X, Y) && !ellipse(30510.831451, 25106.883057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24435.192505, 21843.704697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25815.467896, 18318.080673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22312.379761, 35817.271240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29775.537320, 34859.079200, 481.549214, 481.549214, 0.000000, X, Y) && !ellipse(19621.736000, 34326.594000, 396.784011, 396.784011, 0.000000, X, Y) && !ellipse(22110.346634, 21507.190353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13943.209686, 21002.990997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30048.683400, 20259.650000, 331.122410, 331.122410, 0.000000, X, Y) && !ellipse(21330.016600, 34789.366000, 581.242417, 581.242417, 0.000000, X, Y) && !ellipse(14661.283600, 31321.852631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30466.574768, 28615.798981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22142.389800, 27818.045600, 307.024809, 307.024809, 0.000000, X, Y) && !ellipse(21761.745270, 27342.577026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15204.306122, 26442.182251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16035.784302, 23102.481964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26447.524170, 21777.971481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25594.134033, 22049.851791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25001.295197, 21894.617538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26301.901123, 21158.570404, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 27 20:39:22 2012] Writing fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src10.gif
[Tue Mar 27 20:51:54 2012] Mean detx,y = (722.08, 3396.55) 
[Tue Mar 27 20:52:03 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 20:56:36 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 20:56:37 2012] Setting source spectrum file to fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Mar 27 20:56:37 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Mar 27 22:38:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Mar 27 22:38:27 2012] rmf not generated due to insufficient counts
[Wed Mar 28 01:21:26 2012] Updating aperture counts using extracted products
[Wed Mar 28 01:21:26 2012] Error reading totcts from fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Mar 28 01:21:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 01:21:29 2012] Using photon index=1.80, rate=0.0245, arf fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src10.arf
[Wed Mar 28 01:21:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 01:21:29 2012] Updating source flux to 6.2e-14
[Wed Mar 28 01:24:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting