[Tue Mar 27 10:47:26 2012] Detection parameters:
  Position = (284.8, 266.1) = 14 12 20.96 -34 20 21.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2877.5 +/- 70.7
  Background counts = 243.9
  Rate = 0.06 +/- 0.001

[Tue Mar 27 10:47:29 2012] Off-axis axis estimate = 2.54'
[Tue Mar 27 10:53:55 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 10:53:55 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Tue Mar 27 10:53:55 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.776
[Tue Mar 27 10:53:55 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.70"
[Tue Mar 27 13:40:49 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src1.ximg exists
[Tue Mar 27 13:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src1.csv
[Tue Mar 27 13:40:49 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Mar 27 13:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src1.csv
[Tue Mar 27 13:40:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 13:40:50 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar 27 13:40:50 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar 27 13:40:50 2012] Fit fullrun_pn_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Mar 27 16:03:18 2012] Spatial fit model total counts = 6685.400000, observed total counts = 6303.000000
[Tue Mar 27 16:03:18 2012] Offset between fit and detection position for source 1 = 0.237701 pixels
[Tue Mar 27 16:03:18 2012] 6715.080000 total counts/ 4890.620000 bgd. counts: snr = 26.088697
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.237701 pixels
  Position = (284.7, 266.3) = 14 12 21.01 -34 20 21.1
  Extent = 7.5 (6.9-8.3)", rotation angle = 0
  Source counts = 1824.5 +/- 81.9
  Background counts = 4890.6
  Rate = 0.03 +/- 0.001
[Tue Mar 27 16:03:18 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:03:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:03:18 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 16:03:18 2012] Source does appear to be extended
[Tue Mar 27 16:03:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 16:04:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 27 16:04:00 2012] Initial guess for spatial extent in simple fitting = 7.47"
[Tue Mar 27 16:04:00 2012] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.272
[Tue Mar 27 16:04:00 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.47"
[Tue Mar 27 18:25:39 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_src1.ximg exists
[Tue Mar 27 18:25:39 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_src1.csv
[Tue Mar 27 18:25:39 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Mar 27 18:25:39 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_src1.csv
[Tue Mar 27 18:25:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 18:25:39 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar 27 18:25:39 2012] fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar 27 18:25:39 2012] Fit fullrun_pn_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Mar 27 20:38:39 2012] Spatial fit model total counts = 6684.460000, observed total counts = 6303.000000
[Tue Mar 27 20:38:39 2012] Offset between fit and detection position for source 1 = 0.007910 pixels
[Tue Mar 27 20:38:39 2012] 6714.100000 total counts/ 4884.580000 bgd. counts: snr = 26.177222
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.007910 pixels
  Position = (284.7, 266.3) = 14 12 21.01 -34 20 21.1
  Extent = 7.5 (6.9-8.3)", rotation angle = 0
  Source counts = 1829.5 +/- 81.9
  Background counts = 4884.6
  Rate = 0.03 +/- 0.001
[Tue Mar 27 20:38:39 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 20:38:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 20:38:39 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 20:38:39 2012] Source does appear to be extended
[Tue Mar 27 20:38:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 20:39:21 2012] Counts = 1829.520000, rescaling region sizes by 2.000000
[Tue Mar 27 20:39:21 2012] XMMSAS src. selection expression = ellipse(24719.635400, 23120.285600, 898.678826, 898.678826, 0.000000, X, Y)
[Tue Mar 27 20:39:21 2012] Writing source region out to fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src1_src.reg
[Tue Mar 27 20:39:21 2012] Extracting stamp from image fullrun_pn_xmm0603751001_pi300-10000_cl_sm2.00.img.gz, (233, 215) - (336, 318)
[Tue Mar 27 20:39:22 2012] XMMSAS bgd. selection expression = annulus(24719.635400, 23120.285600, 2995.596086, 5991.192172, X, Y) && !ellipse(27211.856659, 29283.002533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29621.140220, 28576.932800, 462.582413, 462.582413, 0.000000, X, Y) && !ellipse(29855.514800, 27196.263400, 448.979213, 448.979213, 0.000000, X, Y) && !ellipse(23450.617371, 26843.827118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30510.831451, 25106.883057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24435.192505, 21843.704697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25815.467896, 18318.080673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22110.346634, 21507.190353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30048.683400, 20259.650000, 331.122410, 331.122410, 0.000000, X, Y) && !ellipse(18326.085587, 16921.148956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25876.921204, 16432.681976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30466.574768, 28615.798981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22142.389800, 27818.045600, 307.024809, 307.024809, 0.000000, X, Y) && !ellipse(21761.745270, 27342.577026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26447.524170, 21777.971481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25594.134033, 22049.851791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25001.295197, 21894.617538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26301.901123, 21158.570404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24051.087324, 17457.557200, 320.594257, 320.594257, 0.000000, X, Y)
[Tue Mar 27 20:39:22 2012] Writing fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src1.gif
[Tue Mar 27 20:39:55 2012] Mean detx,y = (1315.05, -384.65) 
[Tue Mar 27 20:40:04 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 20:42:45 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 20:42:46 2012] Setting source spectrum file to fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Mar 27 20:42:46 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Mar 28 01:21:25 2012] Updating aperture counts using extracted products
[Wed Mar 28 01:21:25 2012] Error reading totcts from fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar 28 01:21:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 01:21:29 2012] Using photon index=1.80, rate=0.0329, arf fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src1.arf
[Wed Mar 28 01:21:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 01:21:29 2012] Updating source flux to 7.5e-14
[Wed Mar 28 01:26:36 2012] Reading fit data from xmm0603751001/analysis//spectral/fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src1_pl.csv
[Wed Mar 28 01:26:36 2012] Spectral fit parameter nH value = 2.67939e+21
[Wed Mar 28 01:26:36 2012] Spectral fit parameter PhoIndex value = 3.31047
[Wed Mar 28 01:26:36 2012] Failed to get F(0.3-8.0) from xmm0603751001/analysis//spectral/fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Mar 28 01:26:36 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 01:26:36 2012] Using Nh = 2.7e+21, photon index=3.31, rate=0.0329, arf fullrun_pn_xmm0603751001_pi300-10000_pass1_cl_src1.arf
[Wed Mar 28 01:26:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 01:26:36 2012] Updating source flux to 5.9e-14