[Tue Mar 27 10:49:08 2012] Detection parameters:
  Position = (279.9, 277.6) = 14 12 22.70 -34 19 29.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.6 +/- 18.9
  Background counts = 114.3
  Rate = 0.002 +/- 0.0003

[Tue Mar 27 10:49:08 2012] Off-axis axis estimate = 2.03'
[Tue Mar 27 14:31:11 2012] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 14:31:11 2012] Initial guess for spatial extent in simple fitting = 7.44"
[Tue Mar 27 14:31:11 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.023
[Tue Mar 27 14:31:11 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 7.44"
[Tue Mar 27 16:02:57 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_src31.ximg exists
[Tue Mar 27 16:02:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_src31.csv
[Tue Mar 27 16:02:57 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_src31_1.ximg exists
[Tue Mar 27 16:02:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_src31.csv
[Tue Mar 27 16:02:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:02:57 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Tue Mar 27 16:02:57 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Tue Mar 27 16:02:57 2012] Fit fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Tue Mar 27 16:03:36 2012] Spatial fit model total counts = 1244.280000, observed total counts = 1142.000000
[Tue Mar 27 16:03:36 2012] Offset between fit and detection position for source 33 = 8.561095 pixels
[Tue Mar 27 16:03:36 2012] 1242.052000 total counts/ 1118.060000 bgd. counts: snr = 3.708183
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 8.561095 pixels
  Position = (273.2, 282.9) = 14 12 25.06 -34 19 9.0
  Extent = 14.9 (14.8-29.8)", rotation angle = 0
  Source counts = 124.0 +/- 35.2
  Background counts = 1118.1
  Rate = 0.002 +/- 0.0006
[Tue Mar 27 16:03:36 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:03:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:03:36 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 16:03:36 2012] Source does appear to be extended
[Tue Mar 27 16:03:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 19:10:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 27 19:10:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 27 19:10:47 2012] Initial guess for spatial extent in simple fitting = 14.88"
[Tue Mar 27 19:10:47 2012] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.041
[Tue Mar 27 19:10:47 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 14.88"
[Tue Mar 27 20:38:19 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_src31.ximg exists
[Tue Mar 27 20:38:19 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_src31_1.ximg exists
[Tue Mar 27 20:38:19 2012] Fit fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_src31 appears to have run properly
[Tue Mar 27 20:38:19 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Tue Mar 27 20:38:19 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Tue Mar 27 20:38:19 2012] Fit fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Tue Mar 27 20:38:57 2012] Source 33 is offset by -6.819287 and 4.886598 pixels which is larger than
2 X fitted extent = 1.764745 x 1.764745, not incorporating fit results
[Tue Mar 27 20:38:57 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 20:38:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 20:38:57 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 20:38:57 2012] Source does appear to be extended
[Tue Mar 27 20:38:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 00:15:27 2012] XMMSAS src. selection expression = ellipse(23716.182000, 24560.980000, 892.974026, 892.974026, 0.000000, X, Y)
[Wed Mar 28 00:15:27 2012] Writing source region out to fullrun_mos2_xmm0603751001_pi300-10000_pass1_cl_src33_src.reg
[Wed Mar 28 00:15:27 2012] Extracting stamp from image fullrun_mos2_xmm0603751001_pi300-10000_cl_sm2.00.img.gz, (222, 232) - (324, 334)
[Wed Mar 28 00:15:27 2012] XMMSAS bgd. selection expression = annulus(23716.182000, 24560.980000, 1488.290043, 2976.580086, X, Y) && !ellipse(24742.737823, 23111.397552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23539.473236, 27011.351501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21413.331600, 24966.201800, 361.756010, 361.756010, 0.000000, X, Y) && !ellipse(22096.485600, 21537.046200, 300.768009, 300.768009, 0.000000, X, Y) && !ellipse(22623.010649, 26292.146013, 566.797293, 364.417205, 54.003916, X, Y) && !ellipse(19976.689423, 28016.675690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25521.590668, 22203.130615, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 28 00:15:27 2012] Writing fullrun_mos2_xmm0603751001_pi300-10000_pass1_cl_src33.gif
[Wed Mar 28 00:33:32 2012] Mean detx,y = (-1396.41, -1361.26) 
[Wed Mar 28 00:33:34 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 00:33:52 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 00:33:52 2012] Setting source spectrum file to fullrun_mos2_xmm0603751001_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Wed Mar 28 00:33:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0603751001_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Wed Mar 28 01:21:37 2012] Updating aperture counts using extracted products
[Wed Mar 28 01:21:37 2012] Error reading totcts from fullrun_mos2_xmm0603751001_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Wed Mar 28 01:21:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 01:21:39 2012] Using photon index=1.80, rate=0.00206, arf fullrun_mos2_xmm0603751001_pi300-10000_pass1_cl_src33.arf
[Wed Mar 28 01:21:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 01:21:39 2012] Updating source flux to 1.8e-14
[Wed Mar 28 01:22:36 2012] Flag b found in src. 33 procflags, skipping spectral fitting