[Tue Mar 27 10:49:07 2012] Detection parameters:
  Position = (201.6, 301.8) = 14 12 50.17 -34 17 44.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.0 +/- 14.9
  Background counts = 65.1
  Rate = 0.001 +/- 0.0003

[Tue Mar 27 10:49:08 2012] Off-axis axis estimate = 7.03'
[Tue Mar 27 14:31:11 2012] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 14:31:11 2012] Initial guess for spatial extent in simple fitting = 9.94"
[Tue Mar 27 14:31:11 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.967
[Tue Mar 27 14:31:11 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 9.94"
[Tue Mar 27 16:02:57 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_src34.ximg exists
[Tue Mar 27 16:02:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_src34.csv
[Tue Mar 27 16:02:57 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_src34_1.ximg exists
[Tue Mar 27 16:02:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_src34.csv
[Tue Mar 27 16:02:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:02:57 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Tue Mar 27 16:02:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src34.csv
[Tue Mar 27 16:02:57 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Tue Mar 27 16:02:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src34.csv
[Tue Mar 27 16:02:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:03:36 2012] Warning: source 34 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 10.177568 pixels away
[Tue Mar 27 16:03:36 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:03:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:03:36 2012] Assessing source extent using major
[Tue Mar 27 16:03:36 2012] Source does appear to be extended
[Tue Mar 27 16:03:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 19:10:48 2012] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 19:10:48 2012] Initial guess for spatial extent in simple fitting = 9.94"
[Tue Mar 27 19:10:48 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.967
[Tue Mar 27 19:10:48 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 9.94"
[Tue Mar 27 20:38:19 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_src33.ximg exists
[Tue Mar 27 20:38:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_src33.csv
[Tue Mar 27 20:38:19 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_src33_1.ximg exists
[Tue Mar 27 20:38:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_src33.csv
[Tue Mar 27 20:38:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 20:38:19 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Tue Mar 27 20:38:19 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Tue Mar 27 20:38:19 2012] Fit fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Tue Mar 27 20:38:57 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 12.641870 pixels away
[Tue Mar 27 20:38:57 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 20:38:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 20:38:57 2012] Assessing source extent using major
[Tue Mar 27 20:38:57 2012] Source does appear to be extended
[Tue Mar 27 20:38:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 00:15:27 2012] XMMSAS src. selection expression = ellipse(17489.970398, 26210.647766, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 28 00:15:27 2012] Writing source region out to fullrun_mos2_xmm0603751001_pi300-10000_pass1_cl_src31_src.reg
[Wed Mar 28 00:15:27 2012] Extracting stamp from image fullrun_mos2_xmm0603751001_pi300-10000_cl_sm2.00.img.gz, (164, 264) - (239, 339)
[Wed Mar 28 00:15:27 2012] XMMSAS bgd. selection expression = annulus(17489.970398, 26210.647766, 1087.500000, 2175.000000, X, Y) && !ellipse(16539.751343, 23183.088654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19976.689423, 28016.675690, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 28 00:15:27 2012] Writing fullrun_mos2_xmm0603751001_pi300-10000_pass1_cl_src31.gif
[Wed Mar 28 00:34:23 2012] Mean detx,y = (-6117.53, -5824.15) 
[Wed Mar 28 00:34:25 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 00:34:56 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 00:34:57 2012] Setting source spectrum file to fullrun_mos2_xmm0603751001_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Wed Mar 28 00:34:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0603751001_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Wed Mar 28 01:18:12 2012] Not generating rmf since there are only 67 counts
[Wed Mar 28 01:18:12 2012] rmf not generated due to insufficient counts
[Wed Mar 28 01:21:37 2012] Updating aperture counts using extracted products
[Wed Mar 28 01:21:37 2012] Error reading totcts from fullrun_mos2_xmm0603751001_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Wed Mar 28 01:21:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 01:21:39 2012] Using photon index=1.80, rate=0.00148, arf fullrun_mos2_xmm0603751001_pi300-10000_pass1_cl_src31.arf
[Wed Mar 28 01:21:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 01:21:39 2012] Updating source flux to 2e-14
[Wed Mar 28 01:22:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting