[Tue Mar 27 10:49:07 2012] Detection parameters:
  Position = (257.2, 412.2) = 14 12 30.65 -34 9 44.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 444.2 +/- 27.6
  Background counts = 53.3
  Rate = 0.01 +/- 0.0009

[Tue Mar 27 10:49:08 2012] Off-axis axis estimate = 8.77'
[Tue Mar 27 14:31:11 2012] Using EEF radius (= 10.82 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 14:31:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 27 14:31:11 2012] Initial guess for spatial extent in simple fitting = 10.82"
[Tue Mar 27 14:31:11 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.009
[Tue Mar 27 14:31:11 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.82"
[Tue Mar 27 16:02:56 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_src2.ximg exists
[Tue Mar 27 16:02:56 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Mar 27 16:02:56 2012] Fit fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_src2 appears to have run properly
[Tue Mar 27 16:02:57 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Mar 27 16:02:57 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Mar 27 16:02:57 2012] Fit fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Mar 27 16:03:36 2012] Spatial fit model total counts = 732.946000, observed total counts = 733.000000
[Tue Mar 27 16:03:36 2012] Offset between fit and detection position for source 22 = 0.287891 pixels
[Tue Mar 27 16:03:36 2012] 725.416000 total counts/ 442.111000 bgd. counts: snr = 13.473753
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.287891 pixels
  Position = (256.9, 412.3) = 14 12 30.73 -34 9 45.8
  Extent = 7.3 (6.1-8.7)" x 4.1 (3.4-4.9)", rotation angle = 346 (334-355) degrees
  Source counts = 283.3 +/- 26.9
  Background counts = 442.1
  Rate = 0.005 +/- 0.0004
[Tue Mar 27 16:03:36 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:03:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:03:36 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 16:03:36 2012] Source does appear to be extended
[Tue Mar 27 16:03:36 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.23
[Tue Mar 27 19:10:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 27 19:10:47 2012] Initial guess for spatial extent in simple fitting = 5.70"
[Tue Mar 27 19:10:47 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.915
[Tue Mar 27 19:10:47 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.70"
[Tue Mar 27 20:38:18 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_src2.ximg exists
[Tue Mar 27 20:38:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_src2.csv
[Tue Mar 27 20:38:18 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Mar 27 20:38:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_src2.csv
[Tue Mar 27 20:38:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 20:38:19 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Mar 27 20:38:19 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Mar 27 20:38:19 2012] Fit fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Mar 27 20:38:56 2012] Spatial fit model total counts = 729.304000, observed total counts = 723.000000
[Tue Mar 27 20:38:56 2012] Offset between fit and detection position for source 22 = 0.137327 pixels
[Tue Mar 27 20:38:56 2012] 725.894000 total counts/ 442.740000 bgd. counts: snr = 13.457002
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.137327 pixels
  Position = (256.8, 412.2) = 14 12 30.76 -34 9 46.2
  Extent = 5.5 (4.9-6.2)", rotation angle = 0
  Source counts = 283.2 +/- 26.9
  Background counts = 442.7
  Rate = 0.005 +/- 0.0004
[Tue Mar 27 20:38:57 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 20:38:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 20:38:57 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 20:38:57 2012] Source does appear to be extended
[Tue Mar 27 20:38:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 00:15:26 2012] XMMSAS src. selection expression = ellipse(22295.366800, 35815.574200, 329.247009, 329.247009, 0.000000, X, Y)
[Wed Mar 28 00:15:26 2012] Writing source region out to fullrun_mos2_xmm0603751001_pi300-10000_pass1_cl_src22_src.reg
[Wed Mar 28 00:15:26 2012] Extracting stamp from image fullrun_mos2_xmm0603751001_pi300-10000_cl_sm2.00.img.gz, (238, 393) - (276, 431)
[Wed Mar 28 00:15:26 2012] XMMSAS bgd. selection expression = annulus(22295.366800, 35815.574200, 548.745016, 1097.490032, X, Y) && !ellipse(20730.818634, 35845.066742, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 28 00:15:26 2012] Writing fullrun_mos2_xmm0603751001_pi300-10000_pass1_cl_src22.gif
[Wed Mar 28 00:19:37 2012] Mean detx,y = (2601.55, -12075.28) 
[Wed Mar 28 00:19:38 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 00:19:46 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 00:19:47 2012] Setting source spectrum file to fullrun_mos2_xmm0603751001_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Mar 28 00:19:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0603751001_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Wed Mar 28 01:21:35 2012] Updating aperture counts using extracted products
[Wed Mar 28 01:21:35 2012] Error reading totcts from fullrun_mos2_xmm0603751001_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Mar 28 01:21:37 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 01:21:37 2012] Using photon index=1.80, rate=0.0047, arf fullrun_mos2_xmm0603751001_pi300-10000_pass1_cl_src22.arf
[Wed Mar 28 01:21:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 01:21:37 2012] Updating source flux to 1.2e-13
[Wed Mar 28 01:24:01 2012] Reading fit data from xmm0603751001/analysis//spectral/fullrun_mos2_xmm0603751001_pi300-10000_pass1_cl_src22_pl.csv
[Wed Mar 28 01:24:01 2012] Spectral fit parameter nH value = 6.46513e+20
[Wed Mar 28 01:24:01 2012] Spectral fit parameter PhoIndex value = 2.31207
[Wed Mar 28 01:24:01 2012] Failed to get F(0.3-8.0) from xmm0603751001/analysis//spectral/fullrun_mos2_xmm0603751001_pi300-10000_pass1_cl_src22_pl.csv, possibly due to different flux energy range selected
[Wed Mar 28 01:24:01 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 01:24:01 2012] Using Nh = 6.5e+20, photon index=2.31, rate=0.0047, arf fullrun_mos2_xmm0603751001_pi300-10000_pass1_cl_src22.arf
[Wed Mar 28 01:24:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 01:24:01 2012] Updating source flux to 9.9e-14