[Tue Mar 27 10:49:06 2012] Detection parameters:
  Position = (285.0, 266.2) = 14 12 20.91 -34 20 20.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1107.4 +/- 44.0
  Background counts = 115.0
  Rate = 0.02 +/- 0.0007

[Tue Mar 27 10:49:08 2012] Off-axis axis estimate = 2.53'
[Tue Mar 27 14:31:11 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 14:31:11 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Tue Mar 27 14:31:11 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.777
[Tue Mar 27 14:31:11 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.70"
[Tue Mar 27 16:02:56 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_src1.ximg exists
[Tue Mar 27 16:02:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_src1.csv
[Tue Mar 27 16:02:56 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Mar 27 16:02:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_src1.csv
[Tue Mar 27 16:02:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:02:57 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar 27 16:02:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Mar 27 16:02:57 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar 27 16:02:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Mar 27 16:02:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:03:36 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.612328 pixels away
[Tue Mar 27 16:03:36 2012] Spatial fit model total counts = 1305.990000, observed total counts = 1155.000000
[Tue Mar 27 16:03:36 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar 27 16:03:36 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:03:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:03:36 2012] Assessing source extent using major
[Tue Mar 27 16:03:36 2012] Source does appear to be extended
[Tue Mar 27 16:03:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 19:10:47 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 19:10:47 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Tue Mar 27 19:10:47 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.777
[Tue Mar 27 19:10:47 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.70"
[Tue Mar 27 20:38:18 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_src1.ximg exists
[Tue Mar 27 20:38:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_src1.csv
[Tue Mar 27 20:38:18 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Mar 27 20:38:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_src1.csv
[Tue Mar 27 20:38:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 20:38:19 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar 27 20:38:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Mar 27 20:38:19 2012] fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar 27 20:38:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Mar 27 20:38:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 20:38:56 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.612328 pixels away
[Tue Mar 27 20:38:57 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 20:38:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 20:38:57 2012] Assessing source extent using major
[Tue Mar 27 20:38:57 2012] Source does appear to be extended
[Tue Mar 27 20:38:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 00:15:26 2012] Counts = 1107.379028, rescaling region sizes by 2.000000
[Wed Mar 28 00:15:26 2012] XMMSAS src. selection expression = ellipse(24742.737823, 23111.397552, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Mar 28 00:15:26 2012] Writing source region out to fullrun_mos2_xmm0603751001_pi300-10000_pass1_cl_src1_src.reg
[Wed Mar 28 00:15:26 2012] Extracting stamp from image fullrun_mos2_xmm0603751001_pi300-10000_cl_sm2.00.img.gz, (210, 191) - (360, 341)
[Wed Mar 28 00:15:26 2012] XMMSAS bgd. selection expression = annulus(24742.737823, 23111.397552, 4350.000000, 8700.000000, X, Y) && !ellipse(18713.453033, 19095.770615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25820.708923, 18319.081619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16067.722977, 32234.534882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24191.132025, 31353.291513, 733.069075, 483.625133, 332.047515, X, Y) && !ellipse(29611.342400, 28582.395000, 361.008810, 361.008810, 0.000000, X, Y) && !ellipse(30518.602200, 25137.162800, 352.296010, 352.296010, 0.000000, X, Y) && !ellipse(33510.106537, 17933.896606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23539.473236, 27011.351501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21413.331600, 24966.201800, 361.756010, 361.756010, 0.000000, X, Y) && !ellipse(29857.787600, 27201.106200, 307.325783, 307.325783, 0.000000, X, Y) && !ellipse(22096.485600, 21537.046200, 300.768009, 300.768009, 0.000000, X, Y) && !ellipse(18282.062546, 16898.125870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16539.751343, 23183.088654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15721.321304, 17366.629684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17611.856000, 16493.050000, 381.664811, 381.664811, 0.000000, X, Y) && !ellipse(29946.427000, 20212.809200, 232.432807, 232.432807, 0.000000, X, Y) && !ellipse(22123.788600, 27819.663400, 253.919207, 253.919207, 0.000000, X, Y) && !ellipse(19678.658401, 15162.955368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16627.822647, 15590.142944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22623.010649, 26292.146013, 566.797293, 364.417205, 54.003916, X, Y) && !ellipse(19976.689423, 28016.675690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25521.590668, 22203.130615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23716.182000, 24560.980000, 1190.632034, 1190.632034, 0.000000, X, Y) && !ellipse(17489.970398, 26210.647766, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 28 00:15:26 2012] Writing fullrun_mos2_xmm0603751001_pi300-10000_pass1_cl_src1.gif
[Wed Mar 28 00:15:41 2012] Mean detx,y = (-1183.06, 319.19) 
[Wed Mar 28 00:15:44 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 00:19:29 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 00:19:30 2012] Setting source spectrum file to fullrun_mos2_xmm0603751001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar 28 00:19:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0603751001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Mar 28 00:38:39 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 28 00:38:39 2012] rmf not generated due to insufficient counts
[Wed Mar 28 01:21:35 2012] Updating aperture counts using extracted products
[Wed Mar 28 01:21:35 2012] Error reading totcts from fullrun_mos2_xmm0603751001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar 28 01:21:37 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 01:21:37 2012] Using photon index=1.80, rate=0.0184, arf fullrun_mos2_xmm0603751001_pi300-10000_pass1_cl_src1.arf
[Wed Mar 28 01:21:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 01:21:37 2012] Updating source flux to 1.6e-13
[Wed Mar 28 01:22:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Mar 28 01:24:01 2012] xmm0603751001/analysis//spectral/fullrun_mos2_xmm0603751001_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete