[Tue Mar 27 10:48:08 2012] Detection parameters:
  Position = (297.4, 189.2) = 14 12 16.55 -34 25 56.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.4 +/- 16.4
  Background counts = 66.7
  Rate = 0.003 +/- 0.0004

[Tue Mar 27 10:48:09 2012] Off-axis axis estimate = 7.92'
[Tue Mar 27 13:40:51 2012] Using EEF radius (= 10.39 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 13:40:51 2012] Initial guess for spatial extent in simple fitting = 10.39"
[Tue Mar 27 13:40:51 2012] source mask rpix=2.4, npix_max = 33, mask sum = 19, frac = 0.569
[Tue Mar 27 13:40:51 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 10.39"
[Tue Mar 27 14:31:11 2012] fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_src13.ximg exists
[Tue Mar 27 14:31:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_src13.csv
[Tue Mar 27 14:31:11 2012] fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue Mar 27 14:31:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_src13.csv
[Tue Mar 27 14:31:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 14:31:11 2012] fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue Mar 27 14:31:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src13.csv
[Tue Mar 27 14:31:11 2012] fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Mar 27 14:31:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src13.csv
[Tue Mar 27 14:31:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:03:25 2012] Source 18 is offset by 7.913050 and -6.046363 pixels which is larger than
2 X fitted extent = 1.194106 x 1.194106, not incorporating fit results
[Tue Mar 27 16:03:25 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:03:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:03:25 2012] Assessing source extent using major
[Tue Mar 27 16:03:25 2012] Source does appear to be extended
[Tue Mar 27 16:03:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 18:25:40 2012] Using EEF radius (= 10.39 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 18:25:40 2012] Initial guess for spatial extent in simple fitting = 10.39"
[Tue Mar 27 18:25:40 2012] source mask rpix=2.4, npix_max = 33, mask sum = 19, frac = 0.569
[Tue Mar 27 18:25:40 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 10.39"
[Tue Mar 27 19:10:47 2012] fullrun_mos1_xmm0603751001_pi300-10000_cl_pass1_src12.ximg exists
[Tue Mar 27 19:10:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603751001_pi300-10000_cl_pass1_src12.csv
[Tue Mar 27 19:10:47 2012] fullrun_mos1_xmm0603751001_pi300-10000_cl_pass1_src12_1.ximg exists
[Tue Mar 27 19:10:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603751001_pi300-10000_cl_pass1_src12.csv
[Tue Mar 27 19:10:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603751001_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603751001_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 19:10:47 2012] fullrun_mos1_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Tue Mar 27 19:10:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src12.csv
[Tue Mar 27 19:10:47 2012] fullrun_mos1_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Tue Mar 27 19:10:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src12.csv
[Tue Mar 27 19:10:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 20:38:45 2012] Spatial fit model total counts = 451.269000, observed total counts = 408.000000
[Tue Mar 27 20:38:45 2012] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar 27 20:38:45 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 20:38:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 20:38:45 2012] Assessing source extent using major
[Tue Mar 27 20:38:45 2012] Source does appear to be extended
[Tue Mar 27 20:38:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 23:35:19 2012] XMMSAS src. selection expression = ellipse(25823.815308, 16411.582458, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 27 23:35:19 2012] Writing source region out to fullrun_mos1_xmm0603751001_pi300-10000_pass1_cl_src18_src.reg
[Tue Mar 27 23:35:19 2012] Extracting stamp from image fullrun_mos1_xmm0603751001_pi300-10000_cl_sm2.00.img.gz, (260, 152) - (335, 227)
[Tue Mar 27 23:35:19 2012] XMMSAS bgd. selection expression = annulus(25823.815308, 16411.582458, 1087.500000, 2175.000000, X, Y) && !ellipse(25817.469788, 18293.460587, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 27 23:35:19 2012] Writing fullrun_mos1_xmm0603751001_pi300-10000_pass1_cl_src18.gif
[Tue Mar 27 23:46:21 2012] Mean detx,y = (7029.70, 3174.71) 
[Tue Mar 27 23:46:23 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 23:46:47 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 23:46:47 2012] Setting source spectrum file to fullrun_mos1_xmm0603751001_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue Mar 27 23:46:47 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0603751001_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed Mar 28 00:13:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 28 00:13:59 2012] rmf not generated due to insufficient counts
[Wed Mar 28 01:21:33 2012] Updating aperture counts using extracted products
[Wed Mar 28 01:21:33 2012] Error reading totcts from fullrun_mos1_xmm0603751001_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Mar 28 01:21:34 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 01:21:34 2012] Using photon index=1.80, rate=0.00331, arf fullrun_mos1_xmm0603751001_pi300-10000_pass1_cl_src18.arf
[Wed Mar 28 01:21:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 01:21:34 2012] Updating source flux to 5e-14
[Wed Mar 28 01:21:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting