[Tue Mar 27 10:48:08 2012] Detection parameters:
  Position = (345.0, 233.8) = 14 11 59.81 -34 22 47.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 139.5 +/- 17.4
  Background counts = 75.5
  Rate = 0.003 +/- 0.0004

[Tue Mar 27 10:48:09 2012] Off-axis axis estimate = 5.78'
[Tue Mar 27 13:40:51 2012] Using EEF radius (= 9.32 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 13:40:51 2012] Initial guess for spatial extent in simple fitting = 9.32"
[Tue Mar 27 13:40:51 2012] source mask rpix=2.1, npix_max = 27, mask sum = 21, frac = 0.752
[Tue Mar 27 13:40:51 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 9.32"
[Tue Mar 27 14:31:11 2012] fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_src12.ximg exists
[Tue Mar 27 14:31:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_src12.csv
[Tue Mar 27 14:31:11 2012] fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_src12_1.ximg exists
[Tue Mar 27 14:31:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_src12.csv
[Tue Mar 27 14:31:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 14:31:11 2012] fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Tue Mar 27 14:31:11 2012] fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Tue Mar 27 14:31:11 2012] Fit fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Tue Mar 27 16:03:25 2012] Spatial fit model total counts = 505.970000, observed total counts = 463.000000
[Tue Mar 27 16:03:25 2012] Offset between fit and detection position for source 17 = 0.608797 pixels
[Tue Mar 27 16:03:25 2012] 502.093000 total counts/ 460.303000 bgd. counts: snr = 1.947827
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.608797 pixels
  Position = (344.9, 233.2) = 14 11 59.87 -34 22 45.0
  Extent = 2.6 (2.3-3.7)", rotation angle = 0
  Source counts = 41.8 +/- 22.4
  Background counts = 460.3
  Rate = 0.0007 +/- 0.0004
[Tue Mar 27 16:03:25 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:03:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:03:25 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 16:03:25 2012] Source does appear to be extended
[Tue Mar 27 16:03:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 18:25:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 27 18:25:40 2012] Initial guess for spatial extent in simple fitting = 2.61"
[Tue Mar 27 18:25:40 2012] source mask rpix=0.6, npix_max = 4, mask sum = 2, frac = 0.413
[Tue Mar 27 18:25:40 2012] Skipping simple spatial due to low active detector fraction
[Tue Mar 27 20:38:45 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 20:38:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 20:38:45 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 20:38:45 2012] Source does appear to be extended
[Tue Mar 27 20:38:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 23:35:19 2012] XMMSAS src. selection expression = ellipse(29953.903480, 20240.182600, 156.799293, 156.799293, 0.000000, X, Y)
[Tue Mar 27 23:35:19 2012] Writing source region out to fullrun_mos1_xmm0603751001_pi300-10000_pass1_cl_src17_src.reg
[Tue Mar 27 23:35:19 2012] Extracting stamp from image fullrun_mos1_xmm0603751001_pi300-10000_cl_sm2.00.img.gz, (336, 224) - (354, 242)
[Tue Mar 27 23:35:19 2012] XMMSAS bgd. selection expression = annulus(29953.903480, 20240.182600, 261.332156, 522.664311, X, Y)
[Tue Mar 27 23:35:19 2012] Writing fullrun_mos1_xmm0603751001_pi300-10000_pass1_cl_src17.gif
[Tue Mar 27 23:45:53 2012] Mean detx,y = (5479.72, -2244.50) 
[Tue Mar 27 23:45:55 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 23:46:11 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 23:46:11 2012] Setting source spectrum file to fullrun_mos1_xmm0603751001_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Mar 27 23:46:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0603751001_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Wed Mar 28 00:13:48 2012] Not generating rmf since there are only 41 counts
[Wed Mar 28 00:13:48 2012] rmf not generated due to insufficient counts
[Wed Mar 28 01:21:33 2012] Updating aperture counts using extracted products
[Wed Mar 28 01:21:33 2012] Error reading totcts from fullrun_mos1_xmm0603751001_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Mar 28 01:21:34 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 01:21:34 2012] Using photon index=1.80, rate=0.000698, arf fullrun_mos1_xmm0603751001_pi300-10000_pass1_cl_src17.arf
[Wed Mar 28 01:21:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 01:21:34 2012] Updating source flux to 1.9e-14
[Wed Mar 28 01:21:42 2012] Source 17 has fewer than 100.000000 counts, skipping spectral fitting