[Tue Mar 27 10:48:08 2012] Detection parameters:
  Position = (192.1, 179.4) = 14 12 53.56 -34 26 38.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 152.2 +/- 18.2
  Background counts = 73.2
  Rate = 0.005 +/- 0.0005

[Tue Mar 27 10:48:09 2012] Off-axis axis estimate = 11.57'
[Tue Mar 27 13:40:51 2012] Using EEF radius (= 12.22 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 13:40:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 27 13:40:51 2012] Initial guess for spatial extent in simple fitting = 12.22"
[Tue Mar 27 13:40:51 2012] source mask rpix=2.8, npix_max = 43, mask sum = 41, frac = 0.937
[Tue Mar 27 13:40:51 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 12.22"
[Tue Mar 27 14:31:11 2012] fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_src6.ximg exists
[Tue Mar 27 14:31:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_src6.csv
[Tue Mar 27 14:31:11 2012] fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Mar 27 14:31:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_src6.csv
[Tue Mar 27 14:31:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 14:31:11 2012] fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Mar 27 14:31:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Mar 27 14:31:11 2012] fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Mar 27 14:31:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Mar 27 14:31:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603751001_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:03:25 2012] Warning, spatial fit 6 centroid is now closest to src. 23
[Tue Mar 27 16:03:25 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:03:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:03:25 2012] Assessing source extent using major
[Tue Mar 27 16:03:25 2012] Source does appear to be extended
[Tue Mar 27 16:03:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 18:25:40 2012] Using EEF radius (= 12.22 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 18:25:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 27 18:25:40 2012] Initial guess for spatial extent in simple fitting = 12.22"
[Tue Mar 27 18:25:40 2012] source mask rpix=2.8, npix_max = 43, mask sum = 41, frac = 0.937
[Tue Mar 27 18:25:40 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 12.22"
[Tue Mar 27 19:10:47 2012] fullrun_mos1_xmm0603751001_pi300-10000_cl_pass1_src6.ximg exists
[Tue Mar 27 19:10:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603751001_pi300-10000_cl_pass1_src6.csv
[Tue Mar 27 19:10:47 2012] fullrun_mos1_xmm0603751001_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue Mar 27 19:10:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0603751001_pi300-10000_cl_pass1_src6.csv
[Tue Mar 27 19:10:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0603751001_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0603751001_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 19:10:47 2012] fullrun_mos1_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue Mar 27 19:10:47 2012] fullrun_mos1_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Mar 27 19:10:47 2012] Fit fullrun_mos1_xmm0603751001_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Tue Mar 27 20:38:45 2012] Spatial fit model total counts = 624.689000, observed total counts = 603.000000
[Tue Mar 27 20:38:45 2012] Offset between fit and detection position for source 11 = 0.172184 pixels
[Tue Mar 27 20:38:45 2012] 628.165200 total counts/ 551.777000 bgd. counts: snr = 3.251955
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.172184 pixels
  Position = (192.0, 179.4) = 14 12 53.62 -34 26 38.6
  Extent = 4.6 (3.3-6.2)", rotation angle = 0
  Source counts = 76.4 +/- 25.1
  Background counts = 551.8
  Rate = 0.001 +/- 0.0004
[Tue Mar 27 20:38:45 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 20:38:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 20:38:45 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 20:38:45 2012] Source does appear to be extended
[Tue Mar 27 20:38:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 23:35:19 2012] XMMSAS src. selection expression = ellipse(16652.516000, 15562.179300, 276.402008, 276.402008, 0.000000, X, Y)
[Tue Mar 27 23:35:19 2012] Writing source region out to fullrun_mos1_xmm0603751001_pi300-10000_pass1_cl_src11_src.reg
[Tue Mar 27 23:35:19 2012] Extracting stamp from image fullrun_mos1_xmm0603751001_pi300-10000_cl_sm2.00.img.gz, (176, 164) - (208, 195)
[Tue Mar 27 23:35:19 2012] XMMSAS bgd. selection expression = annulus(16652.516000, 15562.179300, 460.670013, 921.340027, X, Y) && !ellipse(18306.281723, 16907.050751, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 27 23:35:19 2012] Writing fullrun_mos1_xmm0603751001_pi300-10000_pass1_cl_src11.gif
[Tue Mar 27 23:43:35 2012] Mean detx,y = (3368.21, 11689.64) 
[Tue Mar 27 23:43:37 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 23:43:54 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 23:43:54 2012] Setting source spectrum file to fullrun_mos1_xmm0603751001_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Mar 27 23:43:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0603751001_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue Mar 27 23:56:31 2012] Not generating rmf since there are only 76 counts
[Tue Mar 27 23:56:31 2012] rmf not generated due to insufficient counts
[Wed Mar 28 01:21:32 2012] Updating aperture counts using extracted products
[Wed Mar 28 01:21:32 2012] Error reading totcts from fullrun_mos1_xmm0603751001_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Mar 28 01:21:34 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 01:21:34 2012] Using photon index=1.80, rate=0.00128, arf fullrun_mos1_xmm0603751001_pi300-10000_pass1_cl_src11.arf
[Wed Mar 28 01:21:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 01:21:34 2012] Updating source flux to 2.9e-14
[Wed Mar 28 01:21:42 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting