[Thu Mar 15 03:52:21 2012] Detection parameters:
  Position = (287.8, 275.6) = 5 33 47.77 -62 32 44.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 280.2 +/- 22.4
  Background counts = 43.1
  Rate = 0.005 +/- 0.0004

[Thu Mar 15 03:52:22 2012] Off-axis axis estimate = 1.82'
[Thu Mar 15 05:48:44 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 05:48:44 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Thu Mar 15 05:48:44 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.045
[Thu Mar 15 05:48:44 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.34"
[Thu Mar 15 07:10:39 2012] fullrun_mos2_xmm0603741101_pi300-10000_cl_pass0_src5.ximg exists
[Thu Mar 15 07:10:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603741101_pi300-10000_cl_pass0_src5.csv
[Thu Mar 15 07:10:39 2012] fullrun_mos2_xmm0603741101_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Mar 15 07:10:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0603741101_pi300-10000_cl_pass0_src5.csv
[Thu Mar 15 07:10:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0603741101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0603741101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 07:10:40 2012] fullrun_mos2_xmm0603741101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Mar 15 07:10:40 2012] fullrun_mos2_xmm0603741101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Mar 15 07:10:40 2012] Fit fullrun_mos2_xmm0603741101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Mar 15 07:11:00 2012] Source 27 is offset by 7.565328 and 4.315115 pixels which is larger than
2 X fitted extent = 0.843683 x 0.843683, not incorporating fit results
[Thu Mar 15 07:11:00 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 07:11:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 07:11:00 2012] Assessing source extent using major
[Thu Mar 15 07:11:00 2012] Source does appear to be extended
[Thu Mar 15 07:11:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 10:05:40 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 10:05:40 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Thu Mar 15 10:05:40 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.045
[Thu Mar 15 10:05:40 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.34"
[Thu Mar 15 12:01:41 2012] fullrun_mos2_xmm0603741101_pi300-10000_cl_pass1_src5.ximg exists
[Thu Mar 15 12:01:41 2012] fullrun_mos2_xmm0603741101_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Mar 15 12:01:41 2012] Fit fullrun_mos2_xmm0603741101_pi300-10000_cl_pass1_src5 appears to have run properly
[Thu Mar 15 12:01:41 2012] fullrun_mos2_xmm0603741101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Mar 15 12:01:41 2012] fullrun_mos2_xmm0603741101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Mar 15 12:01:41 2012] Fit fullrun_mos2_xmm0603741101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Mar 15 12:02:13 2012] Source 27 is offset by -5.933614 and -7.103506 pixels which is larger than
2 X fitted extent = 0.843683 x 0.843683, not incorporating fit results
[Thu Mar 15 12:02:13 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 12:02:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 12:02:13 2012] Assessing source extent using major
[Thu Mar 15 12:02:13 2012] Source does appear to be extended
[Thu Mar 15 12:02:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 14:38:24 2012] XMMSAS src. selection expression = ellipse(24991.479553, 23932.699005, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Mar 15 14:38:24 2012] Writing source region out to fullrun_mos2_xmm0603741101_pi300-10000_pass1_cl_src27_src.reg
[Thu Mar 15 14:38:24 2012] Extracting stamp from image fullrun_mos2_xmm0603741101_pi300-10000_cl_sm2.00.img.gz, (250, 238) - (325, 313)
[Thu Mar 15 14:38:24 2012] XMMSAS bgd. selection expression = annulus(24991.479553, 23932.699005, 1087.500000, 2175.000000, X, Y)
[Thu Mar 15 14:38:24 2012] Writing fullrun_mos2_xmm0603741101_pi300-10000_pass1_cl_src27.gif
[Thu Mar 15 14:40:51 2012] Mean detx,y = (2768.83, -3146.64) 
[Thu Mar 15 14:40:53 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 15 14:41:02 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 15 14:41:02 2012] Setting source spectrum file to fullrun_mos2_xmm0603741101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Thu Mar 15 14:41:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0603741101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Thu Mar 15 15:10:09 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Mar 15 15:10:09 2012] rmf not generated due to insufficient counts
[Thu Mar 15 15:36:47 2012] Updating aperture counts using extracted products
[Thu Mar 15 15:36:47 2012] Error reading totcts from fullrun_mos2_xmm0603741101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Thu Mar 15 15:36:50 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 15 15:36:50 2012] Using photon index=1.80, rate=0.00486, arf fullrun_mos2_xmm0603741101_pi300-10000_pass1_cl_src27.arf
[Thu Mar 15 15:36:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 15 15:36:50 2012] Updating source flux to 6e-14
[Thu Mar 15 15:37:19 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting