[Wed Mar 14 12:48:32 2012] Detection parameters:
  Position = (267.5, 319.3) = 22 29 40.61 58 26 10.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1221.1 +/- 145.4
  Background counts = 100.2
  Rate = 0.02 +/- 0.002

[Wed Mar 14 12:48:33 2012] Off-axis axis estimate = 2.71'
[Wed Mar 14 12:55:37 2012] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 12:55:37 2012] Initial guess for spatial extent in simple fitting = 7.78"
[Wed Mar 14 12:55:37 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.763
[Wed Mar 14 12:55:37 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.78"
[Wed Mar 14 13:52:11 2012] fullrun_pn_xmm0603740901_pi300-10000_cl_pass0_src1.ximg exists
[Wed Mar 14 13:52:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603740901_pi300-10000_cl_pass0_src1.csv
[Wed Mar 14 13:52:11 2012] fullrun_pn_xmm0603740901_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Mar 14 13:52:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603740901_pi300-10000_cl_pass0_src1.csv
[Wed Mar 14 13:52:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603740901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603740901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 13:52:12 2012] fullrun_pn_xmm0603740901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Mar 14 13:52:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603740901_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Mar 14 13:52:12 2012] fullrun_pn_xmm0603740901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Mar 14 13:52:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603740901_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Mar 14 13:52:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603740901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603740901_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 15:03:18 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.845916 pixels away
[Wed Mar 14 15:03:18 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 15:03:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 15:03:18 2012] Assessing source extent using major
[Wed Mar 14 15:03:18 2012] Source does appear to be extended
[Wed Mar 14 15:03:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 15:03:42 2012] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 15:03:42 2012] Initial guess for spatial extent in simple fitting = 7.78"
[Wed Mar 14 15:03:42 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.763
[Wed Mar 14 15:03:42 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.78"
[Wed Mar 14 15:48:13 2012] fullrun_pn_xmm0603740901_pi300-10000_cl_pass1_src1.ximg exists
[Wed Mar 14 15:48:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603740901_pi300-10000_cl_pass1_src1.csv
[Wed Mar 14 15:48:13 2012] fullrun_pn_xmm0603740901_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Mar 14 15:48:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603740901_pi300-10000_cl_pass1_src1.csv
[Wed Mar 14 15:48:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603740901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603740901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 15:48:13 2012] fullrun_pn_xmm0603740901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Mar 14 15:48:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603740901_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Mar 14 15:48:13 2012] fullrun_pn_xmm0603740901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Mar 14 15:48:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0603740901_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Mar 14 15:48:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0603740901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0603740901_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 16:56:07 2012] Source 1 is offset by -3.962946 and -5.123640 pixels which is larger than
2 X fitted extent = 0.557857 x 0.557857, not incorporating fit results
[Wed Mar 14 16:56:07 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 16:56:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 16:56:07 2012] Assessing source extent using major
[Wed Mar 14 16:56:07 2012] Source does appear to be extended
[Wed Mar 14 16:56:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 16:56:28 2012] Counts = 1221.116943, rescaling region sizes by 2.000000
[Wed Mar 14 16:56:28 2012] XMMSAS src. selection expression = ellipse(23223.155701, 27734.013306, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Mar 14 16:56:28 2012] Writing source region out to fullrun_pn_xmm0603740901_pi300-10000_pass1_cl_src1_src.reg
[Wed Mar 14 16:56:28 2012] Extracting stamp from image fullrun_pn_xmm0603740901_pi300-10000_cl_sm2.00.img.gz, (192, 244) - (342, 394)
[Wed Mar 14 16:56:28 2012] XMMSAS bgd. selection expression = annulus(23223.155701, 27734.013306, 4350.000000, 8700.000000, X, Y) && !ellipse(28126.259500, 25010.945000, 387.034411, 387.034411, 0.000000, X, Y) && !ellipse(14322.074402, 26783.820801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25774.206085, 36945.297607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29777.384918, 34850.755615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28832.529022, 32995.657440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20907.520126, 30922.968994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27947.192540, 30396.273860, 359.462410, 359.462410, 0.000000, X, Y) && !ellipse(27963.687208, 25805.680600, 274.338408, 274.338408, 0.000000, X, Y) && !ellipse(23813.599701, 25558.389374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20843.810043, 25513.174225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18907.024582, 25124.193848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21608.957340, 20926.251800, 446.540013, 446.540013, 0.000000, X, Y) && !ellipse(29397.782400, 19423.570080, 343.820810, 343.820810, 0.000000, X, Y) && !ellipse(13192.097916, 22141.236572, 1740.000000, 1740.000000, 0.000000, X, Y)
[Wed Mar 14 16:56:28 2012] Writing fullrun_pn_xmm0603740901_pi300-10000_pass1_cl_src1.gif
[Wed Mar 14 16:57:09 2012] Mean detx,y = (-4038.02, 2804.13) 
[Wed Mar 14 16:57:23 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 17:01:36 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 17:01:37 2012] Setting source spectrum file to fullrun_pn_xmm0603740901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar 14 17:01:37 2012] Setting bgd. spectrum file to fullrun_pn_xmm0603740901_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Mar 14 17:34:28 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 14 17:34:28 2012] rmf not generated due to insufficient counts
[Wed Mar 14 18:32:50 2012] Updating aperture counts using extracted products
[Wed Mar 14 18:32:50 2012] Error reading totcts from fullrun_pn_xmm0603740901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar 14 18:32:52 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 14 18:32:52 2012] Using photon index=1.80, rate=0.0188, arf fullrun_pn_xmm0603740901_pi300-10000_pass1_cl_src1.arf
[Wed Mar 14 18:32:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 14 18:32:52 2012] Updating source flux to 9e-14
[Wed Mar 14 18:34:26 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Mar 14 18:35:15 2012] xmm0603740901/analysis//spectral/fullrun_pn_xmm0603740901_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete